Fodsports BT-S2 Pro Bluetooth Helmet Intercom User Manual

BT-S2 Pro Bluetooth Helmet Intercom

User Manual

Package Contents

Product Descriptions

The Inter Phone is a Bluetooth Headset designed for the motorcycle rider and passenger who wish to have clear and reliable wireless communica­tions while riding. This headset is compatible with Bluetooth cellular phones and can be suited to any sort of helmet for motorcyclists.

1. Phone Button
2. Volume –
3. Volume+
4. Power/intercom Button
5. Cable Input Interface
6. Charger and Headset Socket
7. LED Indicator

Main Features

1. Bluetooth intercom and mobile phone can be connected within a range of 10 meters.
   Bike-to-bike intercom for rider & passenger or two separate bikes.
   Up to 800-1000 meters.
   Up to 10 hours talk time when connected to cell phone.
   Up to 8 hours talk time when using the intercom feature.
   Up to 300 hours standby.

2. Answer/reject call.

3. Receive a cell phone call automatically

4. Support audio transfer.

5. Support the last number redialing.

6. FM Radio function.

7. Enjoy the cell phone music through A2DP or connect GPS.

8. Control cell phone music through AVRCP: forward, backward, play, pause.

9. Automatic switching among bluetooth cell phone, intercom, stereo music.

10. With DSP echo cancellation and noise suppression technology, crystal clear voice quality is guaranteed in a high speed.

11. Button panel is water-proof and sun-proof, while the design is durable.

12. Audio cable to connect MP3, GPS, walkie-talkie and so on.

Using the Headset Clip Mount with Fastening Clamp

1. Using the provided screw driver, loosen the Clips’ screws enough to allow the Clip to slide onto either side of the Helmets’ shell.
2. Make sure you put the clip under the helmets padding.
3. Adjust the Clip until you find the best location for your helmet.
4. Tighten the screws to hold the clip firmly in place.

Mounting the Inter Phone

1. Take your Inter Phone Headset and slide it down into the slots in the Headset Clip Mount. Make sure that it’s perfectly fitted and locked into place by trying to extract it, pulling upwards.

2. Now you need to attach the speaker and microphone arm to the inside of the helmet. Take the Velcro pad which the speaker will attach to, and test for the best position to fix it. The Velcro Pad should be fixed at the height of your ear in the helmets ear pocket. You will need to put the helmet on a few times to find the optimum position to apply the pad. When the correct positioning is found, remove the protective strip and apply the Velcro Pad.

3. Next, take the Ear Speaker and attach it to the Velcro Pad. Run the Microphone Arm down along down to where your mouth will be. As the Microphone Arm is flexible, you can adjust it so it sits in the optimum position in front of your mouth. Some helmets have removable padding; if yours does, it is recommended to run the speaker and microphone under the padding.

4. Taking care to match the pins up, connect the Headset Plug to the Headset Socket. The plug can only be inserted in one position.

5. Secure the cord of the Headset Plug inside the helmet. Tuck any extra wire into the helmet. Ensure that only few centimeters of the cord comes out. You have successfully mounted the Inter Phone

Note: Another choice for mounting the Inter Phone
You can directly use the Velcro(with 3M) to mount the lnterphone on the edge of helmet. See the following pictures.

Quick Removal of the Inter Phone

Remove the BT-52 Prolnter Phone by pushing down the lock as shown and then take out the Inter Phone Module in an upward motion

Charging The Headset

Before using this device, Please charge the headset with USB charging cable. Please ensure that the battery is fully recharged when you first time use it.
We have provided you with the ability to charge the system via the USB port of your computer.
The charging cable has a small USB plug for the headset and the large USB plug for the computer or AC adapter; please observe to correct orientation of the USB plug and socket before inserting

1. Insert the USB plug of the charging cable, into the USB small jack of the headset; you can either charging by computer or AC adapter.
2. While charging, the red LED on the headset module will illuminate, when the charging is finished, the red LED will extinguish. A normal charge from a low battery will take about 4 hours.

Note: if you do not use the headset for a month or more, to protect the Poly-Li battery, please charge the headset at least every month. (The fault damaged by wrong charging will be not guaranteed).

Turning the Unit on into Standby Mode
Press and hold the power/intercom button at the end of the unit. After 3 sec you will hear a “Di” and the blue LED will begin to flash. Let go of the button and the unit is now in standby mode.

Turning off the Unit
Press the power /intercom button for 5 seconds until you hear a “Di” tone and the lights extinguish.
Note: When turn off the unit, please don’t loosen the power/intercom button when hear “dudu”tone. If so, the Bluetooth memory will be cleared away.

To Pair to Your Bluetooth Enabled Mobile Phone

1. Turn on the unit into standby mode (only need blue light flashing).
2. Open the Bluetooth function on your mobile phone.
3. Bluetooth on your phone will search the device until you see BT-S2 Pro.
4. Click “BT-S2 Pro” on your phone, you will hear “DiDi” tone when pair successfully.

Phone Controls

To answer a call – Short press the Phone button once.
Auto receive call – the unit will automatically answer the call after 8-16 seconds of ringing.
To reject a call – Press the Phone button and hold until you hear a “Du” (around 2 seconds).
To end a call – Whilst call is active short press the Phone button once Last number redial – When in standby mode. Press and hold the Phone button for 2 seconds until you hear a “Du”.
To go to a phone call during an intercom call – Press and hold the Phone button for 2 seconds until you hear a “Du”.

Note: Depending on the phone some or all of these functions may not work, or operate differently.

Music Controls
Play / Pause – Short press phone button once
Next Track- Turn the “+” button and let go
Previous Track- Turn the”- ” button and let go
To Adjust the Volume
Long press”+”button to increase and long pess”-” button to decrease. This function is also fit for intercom/music/FM radio

To Pair 3 Devices in Intercom Mode

1. Follow the above procedure for each combination of the three units.(A-B, B-C, A-C).
2. Ensure the third unit is switched off when pairing the other two devices. For example: When A is paired with B, C is turned off. When B is paired with C, A is turned off. When A is paired with C, B is turned off.
3. Only 1 connection can be live at a time. Please follow the above steps to pair A-B, B-C,A-C.After pairing A and C successfully, press A’s power button once, that means A and C exit the intercom mode. At this time, A, B, and C are in standby mode, B acts as a bridge. And then press A’s power button again, A Enter the intercom mode with B. Press A’s power button twice, A Enter the intercom mode with C. Press C’s power button once, Band C enter the intercom mode.
4. From Standby press the power/intercom button 1 time for one of the pairings to be called, or 2 times for the other pairing to be called.
5. The pairing for 1 or 2 presses will depend on the sequence in which you paired the 3 helmets, but once paired the relevant pairings will maintain the number.
6. i.e. A will press the power/intercom button 1 time to call C and 2 times to call B. B will press the button 1 time to call C and 2 times to call A. C will press the button 1 time to call A and 2 times to call B.

About the second pairing
When you unintentionally turn off the intercom or need to use for a second time, You can do as following :

1. Turn on the two intercoms at the same time, then will see the blue lights flashing.
2. Please wait 5-6 seconds after the blue lights flashing.
3. Then press the”power button” of any intercom, after 3-6 seconds, blue lights on both devices flashing at the same time and remain alight. for about 2-3 seconds, indicating successful pairing.

To Reset the Pairing Memory

1. If you have problems pairing, then it is best to reset the pairing memory
2. Turn on the relevant unit into standby mode. Press the power/intercom button for 3-5 seconds till a “dudu” can be heard.
3. Let go of the button when the tone is heard.(The unit will turn off)
4. Restart, the memory will be erased. (Repair again)

To Start FM Radion
After turn the unit on, Press Phone button for 2 Times(till hear “du” tone), let go of the button, FM rad ion will start.

Short press:”+” or ,,_,, button you can adjust the channel.
When FM radio start, Press Phone button for 2 Times, FM will end up (stop).
Note: In order to make FM radio the best effect, you should pay attention to the following instruction:

1. The line of earphone is unfolded.
2. Try to listen to the FM radio outside or near the window.
3. Because of the frequency problem, FM function may not be used in Japan.

To Use Audio Cable
Audio cable can insert cable input interface, it can connect MP3, GPS, Mobile phone and so on.
Pis: Walkie-talkie Audio cable also can insert cable input interface, it can connect walkie-talkie, so it can intercom for a group of people at the same time. (Walkie-talkie Audio cable need to purchase separate).
Cable adapter is different, according to different model of walkie-talkie.

FAQs:

Is my unit still under warranty?

All Fodsports units come with a 1-year warranty, starting from the date of purchase. Please keep your proof of purchase in order to reclaim your warranty.
Create a record of ownership in case of loss or theft.
REGISTER NOW
Your first point of warranty service is your dealer

Why are my speakers volume low?

A: Please note that both the volume of the intercom or the volume of listening to music can be adjusted with the volume +- button, if you think the intercom volume is too low, you can press “+” button to increase the intercom volume.

Why are my two speakers or one side speaker unavailable/no sound?

Please note that both the volume of the intercom or the volume of listening to music can be adjusted with the spin button, if you think the intercom volume is too low, you canTurn clockwise to increase the intercom volume.

How long will it take to receive the items we buy?

For fast delivery, it will take 5-7 workdays;
For standard free shipping, it will take nearly 30 workdays.

For All Fodsports Intercom FAQs Visit:https://manuals.plus/fodsports /fodsports-intercom-faq

Tech Specification

fodsports.com

Downloads:

Fodsports BT-S2 Pro Bluetooth Helmet Intercom User Manual – [Optimized PDF ]

Fodsports BT-S2 Pro Bluetooth Helmet Intercom User Manual – [Original PDF ]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>