Fodsports 5 inch Motorcycle GPS M5S Pro User Manual

June 6, 2024
Fodsports

Fodsports 5 inch Motorcycle GPS M5S Pro

5 inch Motorcycle GPS M5S Pro

USER MANUAL

M5S Pro GPS Navigation

In order to better experience of the use of the GPS navigation, please remove the first screen protection film.(One GPS contains two screen protection films)

GPS contains

Don’t worry, we have two screen protection films, after remove the first films, there are another film under it to the protect scree

GPS contains

Product Introduction

Welcome to use the GPS navigator, which is mainly used for navigating and also has the optional function of video playing, audio playing, Bluetooth, photo viewing, Wi-Fi etc.

1. Standard Configuration

Standard Configuration

After receiving the items above, please confirm the actual products. If any damage or difference, please contact the distributor or the agent asap.

Please read the user manual carefully before operation.

2. Product Diagram

Product Diagram

1. LCD Screen 5″ TFT display with touch screen
2. Power Button Tum on/off the GPS navigator
3. Micro SD Card Slot Support Micro SD card up to 32GB
4. USB Port USB 2.0, MINI USB port
5. Micro Charging Port Connect with the power
6. Loudspeaker Stereo HD speaker
7. Reset button Restart OS

*Twist the screws out and insert the TF card

3. Specifications

LCD Screen 5″ TFT LCD display Resolution 800RGB(H)x480(V)
CPU MTK8163 Cortex A53x4 1.3GHz
Memory 1 GB DDR, 16GB Flash
Touch Screen Capacitance type, 5-point touch
USB Interface USB 2.0, MINI USB port
Battery Capacity 3000 mAh/3.7V
Micro SD Support Micro SD card up to 32GB Class 10 higher level
Audio Built-in HD speaker
Battery Built-in rechargeable Li-battery
Charging Input DC SV/ 1.5A
AC Charger Input AC 100-230V; Output DCSV/ 1.5A
Car Charger Input DC 9-24V; Output SV/ 1.5A
Operation System Android 6.0 64Bit
Video Player Support Super HD 2160P. MKV, AVI, WMV, RMVB, TS, TP, M2TS, RM,

MPEG, VOB, MOV, FLV, MP4, 3GP, DAT, PMP
Audio Player| WMA, MP3,OGG,APE,FLAC,AAC, WAV
Photo Viewer| JPG, BMP, PNG, GIF
Temperature| Operating Temperature: -10C to 70C
Storage Temperature: -20 ·c to 85 ·c
Working Humidity| 45% to 80% RH
Storage Humidity| 30% to 90% RH
Atmospheric Pressure| 86KPa to 106KPa

Operation Instruction

1. Power Supply & Charge
1.1 Power Supply
There are three ways to supply power: battery, adaptor, USB cable. GPS navigation uses the lithium battery to supply power when it is not connected with adaptor. The mark [ ] on the top right comer of interface indicates the current battery power.

  • GPS navigator uses the external power when it is connected with the motorcycle.
  • GPS navigator utilizes the USB cable to supply power when the GPS is connected with the PC.
    (Remark)

( 1 ) In normal conditions (if the backlight is not so bright), the actual supply time will be different in the three supply ways. For example, audio playing. video playing and bright backlight will consume large power, and shorten the navigating time.
(2) Please do not poke, bump, take it apart or throw it into fire or water.

1.2 Charge

  • Connect the DC port with the motorcycle, the red line ( + ) is connected with ignition switch and the black line ( -) with the negative pole, when you tum on the motorcycle, the GPS navigator will tum on automatically.
  • The other port connected to the socket, it supplies power while charging.

2. Power On/Off

2.1 Power On
Keep pressing the power button in 3 seconds to turn on the device;
(Note) before power on the device. please check if the power is enough.

2.2 Power Off/Reboot/Silent mode Keep pressing the power button in 3 seconds to enter the menu and click “Power Off” to shut down, “Reboot” or “Silent mode” the device.

3. Reset System

  • If the system cannot work, you can reset the system by the following way:

  • Click the reset key in the back of device to reset the system with the stylus.
    (relative information) : it can be no response in the following condition:

  • The shift between pictures is delayed or stopped.

  • The program select function cannot work normally, such as long time to carry out or cannot be activated.

  • The power button cannot work
    ( Note ) The unsaved data will be lost as you reset the system without any response. Please keep a habit of copying the data every other time into the outer storage.

4. Installation Instruction

(1) There are several ways to install the bracket, as shown in the following figure:

Installation

Installation

Installation

(2) Install the device to the cradle,

Install the device to the cradle

(3) Press directly above the screen hard by two fingers to make sure the card slot position is tight, when you can hear “Ta”, means it finished.

(4) Please check out to make sure the slot position is tight.

(5) wring the screw behind the mount to fasten the device.

(6) Installing the support bracket
Installing the support bracket

5. Connect with Computer

The device can be connected with the computer through the MINI USB. You can copy the document between navigator and computer.

  1. Please confirm the GPS navigation is powered on.
  2. Twist the two screws out of the lid with a screwdriver in the package. Show as Figure5-1.
  3. Connect the MINI end [ ] of USB cable with the USB port on the left of GPS device and the normal end [ ] with the Host port on computer.
  4. Please pull out the MINI USB cable after you finished your operation.
  5. Twist the screws back to tighten the lid with the screwdriver.
  6. The connection of this navigation is MTP. When you connect with company, you can see this icon in your computer. Double click it you can see the storage of SD card and the storage of navigation. show in Figure5-2.

Primary Function

Primary Function

1. Main Menu and Icons Function
1.1 Main Menu:

Main Menu

1.2 Icons Functions on the interface bottom

the interface bottom

2. FM Transfer

Click to enter FM interface, shown as Figure 2-1.
When you plan to use this function, please select “Use FM”.
Please note that if the “use FM” is selected, the speaker in the navigator is not working, and the audio signals are modulated into FM signals to be launched

3. Music
Click the Music icon enter music interface, show in Figure 3-1

Figure 3-1

Click   Icon at the top right to have setting detail.

have setting

Party shuffle Play randomly
Shuffle all Play all
Sound effects Adjust the sound effects
Search Search the song

4. Navigation
Short press the Navigation icon interface, show in Figure 4-1.

map

Long press the Navigation icon interface. show in Figure 4-2

map

Choose any icons to set the path.
For example, when you choose GPS info, press this icon for 3 seconds, then you will see a note as Figure 4-3.
app list
When you return to main interface and press navigation icon, you can enter the GPS Information interface as Figure 4-4.
GPS Information

5. Setting

Click to enter setting interface as Figure 5-1.

setting interface

5.1 Wi-Fi
Click the icon to find Wi-Fi and choose “ON”
setting interface
Then you can view the Wi-Fi network around you, choose the Wi-Fi network you want, a window will pop up automatically as Figure 5-2. Input password and clicking the “Connect” icon.

Connect
The device will automatically search the surrounding Bluetooth device. As Figure 5-3.

bluetooth

5.3 Data Usage
Click Data usage to view the data usage as Figure 5-4

Data Usage

5.4 Sound
Click Sound to enter Sound interface as Figure 5-5.

Data Usage
5.5 Display
Click Display 10 enter Display interface as Figure 5-6

Display
5.6 Storage
Click Storage to enter Storage interface as Figure 5-7. You can view the storage af internal device or micro SD card.

Storage
5.7 Battery
Click Battery to enter Battery interface as Figure 5-8

Battery

5.8 Apps
Click. App to enter Storage interface as Figure 5-9

Apps
5.9 Location
Click Storage to enter Location interface as Figure 5-10.

Location

5.0 Language
Click Storage to enter language interface as Figure 5-11.

Language
Click Language Click English (United States) Figure 5-12.

Language
5.11 Backup & Reset
Backup & Reset
5.12 Date & Time

Click Date and time to enter Date and time interface as Figure 5-14

Date & Time

5.13 Accessibility
Click Accessibility to enter Accessibility interface as Figure 5-15.

Accessibility

5.14 Developer Options
Click Developer options to enter Developer interface as Figure 5-16.
The USB debug mode is a function that Android provides for development, using this function to copy data between computer and Android devices, install applications on mobile devices, read log data. etc ..

Developer Options
5.15 About Navigation Equipment
Click and enter the interface as Figure 5-17

About Navigation Equipment

6. APPS
Click Apps icon to enter Apps interface. Choose any programs you want. Shown as Figure 6-1

APPS

7. Installation Videos

Downloads:

Fodsports 5 inch Motorcycle GPS M5S Pro Manual – [Optimized PDF ]

Fodsports 5 inch Motorcycle GPS M5S Pro  Manual – [Original PDF ]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals