Fodsports F1 Motorcycle Helmet Bluetooth Speaker User Manual

F1 Motorcycle Helmet Bluetooth Speaker

USER MANUAL

Product Introduction

Function Introduction

1. Super sound quality. High volume.
2. Switchable Chinese and English voice prompt.
3. Support connection to two phones.
4. Connected to phone to realize automatic answering calls, rejecting calls, voice calls, music playing and other functions.
5. Function priority :Phone call> Music.
6. Built-in FM radio

Packing List

Installation Steps

1. Glue the Velcro loop side (outward) in the corresponding position of ear inside the helmet.
2. Fasten the headset inside the helmet via the hook side and loop side of Velcro.
3. Organize the earphone cables. Installation complete.

F1 Pairing and Connecting to Phone Steps

1. Place the F1 and the phone within a visible range of 1 meter. And make sure F1 is off status.

2. When F1 is off, press and hold the multi-function button for 6 seoonds. The red end blue lights flesh alternately, and there is a “Pairing• sound prompt.

Notes: Only when the red and blue lights flash alternately, It can be searched. The headset will automatically be turned off if there is no pairing device in 6 minutes.

3. Tum on the phone Bluetooth, search ‘FODSPORTS F1 / M1S” and connect The ·connected” sound prompt means the connection is successful.

Note: It can connect with two phones. When the headset is turned on, it will automatically connect to the latest connected phone. To connect to the second phone, you need to click the Bluetooth connection on the phone.

Button Operation Instructions

Multi-function button

Tum on: When the headset is off, press and hold it for 2 seconds. There Is a “Power on· sound prompt, and the blue light will be on for 1 second.

Tum off: When the headset is on, press and hold It for 3 seconds. There is a “Power off’ sound prompt, and the red light will be on for 1 second.

Pairing: When the headset is off, press and hold it for 5 seconds. There is a “Pairing” sound prompt, and blue and red lights flash alternately.

Answering a call: When connected and there is a call, click ii once or lake no action in 10 seconds. The call will be put through automatically with a ‘Dong, Dong” sound prompt.

Reject of call: If there Is a call, press and hold It for 2 seconds. The call will be rejected with a “Dong, Dong” sound prompt.

Phone call voice switch: During a call, press and hold it for 2 seconds. There is a “Dong• sound prompt, and the red light flash every other second.

End a call: Dur1ng the call, click It once and there Is a “Dong’ sound prompt.

Voice call: If you are not on a call, click ii twice and there Is a “Voice Dial” sound prompt.

Music Play/Pause: When connected, click it once.

Switch between Chinese and English voice prompt: In Pairing status and Bluetooth is not connected, click it twice and there is a “Dong, Dong, Dong, Dong· sound prompt.

Switch between Bluetooth and FM: ( When the headset is on, double- click it and there Is “Bluetooth mode” or ‘FM mode’ sound prompt.)

Automatic search for FM radio: (When FM mode is on, double-click it to enable automatic channel search function. When search Is complete, If no channel is found, it will stop searching automatically, then just click the button once shortly to change to the next one.)

+ Button

Tum up the volume: When On a call, playing music or FM , click It once. There Is a “Dr sound prompt once reaching the maximum volume.

Play the next: When playing music, press and hold it for 2 seconds, ii will advance to the next. Press and hold It for more then 3 seoonds, It will cycle the next.

– Button

Tum down the volume: When on a call , playing music or FM, click it once. There is a “Du” sound prompt once reaching the minimum volume.

Play the previous: When playing music, press and hold it for 2 seconds, it will move back to the previous. Prass and hold it for more than 3 seconds, It will cycle the previous.

+, – Button

Clear the paired device: In pairing status, press the ‘+” button and “-“button simultaneously and there is a “Du, Du” sound prompt.

Bluetooth status Indication and prompt

• Power on status (II Bluetooth is connected, the blue indicator light flashes once every 6 seconds; if Bluetooth is not connected, the blue indicator light flashes two limes every 6 seconds.)
• Low power alarm (The “Battery Low” sound Is prompted once every 60 seconds when the power is turned on, and the indicator light follows the current status and turns to red light flashing)
• Charging status (Red light Is on when charging. Red light is off when charging is completed.)
• Battery status sound prompt when powered on (If the battery is full, the “Battery Full” sound is prompted. If the battery is low, the “Low Battery Please Charge· sound is prompted.)

Specifications

• Bluetooth version: 5.0
• Operating range: Up to 33 feet (>10 meters)
• Standby time: Up to 400 hours
• Operating time: Up to 10 hours
• Charging time: Approximately 2.5 hours
• Charging interface: Micro USB Android universal plug
• Battery Type: Rechargeable Li-Polymer Batteries
• Power Supply: 5V — 0.5A
• Operating Temperature: 41F-104F (5 C —40 C)
• Storage temperature: -4F-122F (-20 —50 C )
• Headset Weight: 54g

Warning

1. The appropriate storage temperature for this device is between -20 ·c and 50 ‘C. Please do not store ii in environment with too high or too low temperatures. Otherwise the service life will be affected.
2. Please do not expose it to open fire, to avoid explosion.
3. For a long period of time without being used, please keep the device In dry place and charge It regularly (once every 3 months), to ensure it work properly.

Downloads:

Fodsports F1 Motorcycle Helmet Bluetooth Speaker Manual – [Optimized PDF ]

Fodsports F1 Motorcycle Helmet Bluetooth Speaker Manual – [Original PDF ]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>