Shenzhen Feihe Electronics A15B Bedside Lamp with Wireless Charger User Manual

June 5, 2024
Shenzhen Feihe Electronics

Shenzhen Feihe Electronics A15B Bedside Lamp with Wireless Charger

Bedside Lamp With Wireless Charger

Shenzhen-Feihe-Electronics-A15B-
Bedside-Lamp-with-Wireless-Charger-fig-1

Function

  • HD VA screen can display time, which can also set the alarm clock and wake-up functions.

  • Qi Wireless charger can be applied to the devices that meet the Qi wireless
    charging standard.

  • LED fluorescent lamp.

  • The irradiation angle of the lamp can be rotated to adjust.

  • Power cut memory function for time display.

Operating instruction

  • Plug in the adapter, the display screen lights up and the buzzer makes BIBI sound.
  • The metal poles on both sides of the product are the touch switches of the light.
  • The functions of these two metal poles are exactly the same. Short touch of the pole can adjust the brightness:low-medium-brightest-off, long touching will have no response.
  • When the light is on, if there is no operation within 30 seconds for the touch dimming pole, a short touch of the pole can turn off the light directly.

Product Usage

Shenzhen-Feihe-Electronics-A15B-Bedside-Lamp-with-Wireless-Charger-
fig-2

Wireless Charging Function:

  • The indicator light will turn red while charging normally
  • The indicator light will turn green while the device is fully charged;
  • The red light flashes when there is a problem with the wireless charger.Shenzhen-Feihe-Electronics-A15B-Bedside-Lamp-with-Wireless-Charger-fig-3

Time setting: Short press    to switch between 12-hour and 24-hour mode. Long press the button for 2 seconds to enter time setting mode. Short press the button again to switch from Hour setting , Minute setting and Exit (or waiting for 5 seconds to automatically exit) During the setting mode, Press or A to adjust the settings. Alarm clock setting:

Short press    to open/close the alarm clock. Long press the button for 2 seconds to enter alarm clock setting mode. Short press the button again to switch from hour setting and minute setting, press or can adjust the settings. Short press the button again to enter the snooze function setting mode, press or  can open/close the snooze function. Short press the button again to exit(or wait for 5 seconds to automatically exit).

Product Parameter

  • Rated Voltage:12V/1.5A
  • Wireless Charger :10W (MAX)
  • Rated Power:18W
  • Main Light Source: 3.2W

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

In clock mode, a short press Shenzhen-Feihe-Electronics-A15B-Bedside-Lamp-
with-Wireless-Charger-fig-8can adjust the brightness of the display screen: brightest-medium- low-off Wake-up light function: When the wake-up function is turned on, it will enter the wake-up light mode ten minutes before the set alarm clock time. The lamp light up and the wake-up light icon begins to flash. The light gradually becomes brighter, when the alarm goes off, the light reaches the brightest state.In this mode, the wake-up light can be turned off by touching the metal pole, and the wake-up light icon keeps displayed. Snooze function: When the alarm goes off, pressShenzhen-Feihe-Electronics-A15B-Bedside-Lamp-
with-Wireless-Charger-fig-8), the snooze icon will display. After ten minutes, the alarm will go off again. After three such operations, the function will be turned off. If no operation is performed, the alarm clock of this day will turn off automatically after the alarm continues for 10 minutes. Or in SNOOZE mode, long press  Shenzhen-Feihe-Electronics-A15B-Bedside-Lamp-with-Wireless-
Charger-fig-8  to turn off the alarm clock.

Warranty Card

Applicable for Since the date of purchase, free service is guaranteed for one year under normal use. If beyond the warranty period, the cost of components will be charged.
If the replaced components service are required, the cost will be charged
according to our price list of spare parts maintenance.
Under the following cases, the one-year free warranty service is not available.

  1. Damage caused by non-normal use and natural disasters, such as earthquakes and rat disasters.
  2. Unauthorized maintenance, misuse, collision, negligence, abuse, accident, alteration, incorrect use of accessories that do not belong to the product.
  3. Information on the warranty card is not complete, such as purchase date and seller’s seal and chop are not included.
  4. A special environment is not included in the warranty scope, such as wet, sulfur areas, high salinity areas beside the sea, and corrosive areas.
  5. .Not following the instructions.
  6.  Special offer.
    • In order to avoid damage during transportation, please pack the products carefully when returning for maintenance.
    • The manufacturer shall not be responsible for the breakdown of the product caused by customers’ dismounting.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Shenzhen Feihe Electronics User Manuals

Related Manuals