FAGERHULTA SE – 566 80 Habo Streamer Luminaire Vialume 1 G2 Instruction Manual

September 9, 2024
FAGERHULTA

FAGERHULTA SE – 566 80 Habo Streamer Luminaire Vialume 1 G2

FAGERHULTA-SE -566 80-Habo-Streamer-Luminaire-
Vialume-1-G2-product

Product Specifications

  • Brand: Vialume
  • Model: 1 G2
  • Manufacturer: Fagerhult Sweden
  • Maximum Range: 15 meters
  • Standard: Zhaga
  • Mounting: Class II
  • Torque: 12 Nm
  • Quantity: 2 pieces
  • Weight: 48 units
  • Recommended Torque for Installation: 10 Nm
  • Cable Replacement: By manufacturer or designated person only

Product Usage Instructions

  1. Ensure the luminaire is positioned to prevent prolonged staring at a distance closer than 1 meter.
  2. For damaged cord, replace it exclusively with the manufacturer or manufacturer-designated person.
  3. Only replace the light source and control gear with manufacturer-approved components.
  4. Ensure basic insulation between mains and control wiring.
  5. Pass on relevant information to users of the installation.

Frequently Asked Questions

  • Q: Can I replace the light source and control gear myself?
    • A: No, the light source and control gear should only be replaced by the manufacturer or its designated person.
  • Q: What should I do if the cord of the luminaire is damaged?
    • A: In case of a damaged cord, it should be replaced by the manufacturer or a manufacturer-designated person.
  • Q: What is the recommended torque for installation?
    • A: The recommended torque for installation is 10 Nm.

Dimension

FAGERHULTA-SE -566 80-Habo-Streamer-Luminaire-Vialume-1-G2-fig
\(1\)

Installation Instruction

FAGERHULTA-SE -566 80-Habo-Streamer-Luminaire-Vialume-1-G2-fig
\(2\) FAGERHULTA-SE -566 80-Habo-
Streamer-Luminaire-Vialume-1-G2-fig \(3\) FAGERHULTA-SE -566 80-Habo-Streamer-Luminaire-
Vialume-1-G2-fig \(4\)

Class II

If the cord of this luminaire is damaged, it shall exclusively be replaced by the manufacturer, or by the manufacturer’s designated person.

  • The light source and control gear shall only be replaced by the manufacturer or its designated person

  • The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 1 m is not expected.

  • Basic insulation between mains and control wiring

The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 1 m is not expected.

It is appropriate that this information is passed on to the users of the installation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals