SCHRADER ELECTRONICS AG2PF4 Tire Pressure Monitoring Sensor User Manual
- June 5, 2024
- Schrader Electronics
Table of Contents
TPMS (Tire Pressure Monitoring Sensor)
Model AG2PF4
FCC ID: MRXAG2FP4
IC: 2546A-AG2FP4
User Manual
Schrader Sensor Overview
The Schrader Electronics TPMS (Tire Pressure Monitoring) Sensor is designed to be used in a direct measurement TPM System. The TPM Sensor is intended to interface to a receiver/decoder that has been designed to accept the TPM sensor protocol.
The TPM sensor is designed to monitor a vehicle’s tire pressure whilst driving or stationary. An electronic unit inside each tire (referred to as the TPM Sensor or TPM transmitter) mounted to the valve stem, periodically measures actual tire pressure/temperature.
This pressure information is transmitted to a receiver/decoder by means of an
RF link. The incoming radio frequency signals are decoded, and the data
used to inform the driver of the tire pressure information via the vehicle’s
TPM interface.
TPM Sensor’s main functions are:
- Regularly measure the tire pressure.
- Monitor if the wheel is moving.
- Periodically transmit tire pressure using an RF link and a specific protocol.
- Notify the system if there are abnormal pressure variations (leak) in the tire.
- Monitor the transponder input for valid LF field
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
WARNING: Changes or modifications not expressively approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body
Schrader Electronics Ltd
Unit 11 Technology Park
Belfast Road
Antrim, Northern Ireland, BT41 1QS
The World Depends on Sensors and Controls
http://www.tpmseuroshop.com/documents/declaration_conformities