cudy POE400 POE Injector Installation Guide
- June 6, 2024
- cudy
Table of Contents
cudy POE400 POE Injector
Hardware Connection
Physical Appearance
LED and Interface Explanation
- PWR: PoE injector got 100-240V power input
- 30W: When the PoE output power is 0<P≤30W, LED lights up
- 60W: When the PoE output power is 30<P≤60W, LED lights up
- 90w: When the PoE output power is 60<P≤90W, LED lights up
- AC Socket: Connect with AC cable
- DATA/IN: Connect to the camera with UTP cable CAT5E or CAT6 supply power
- PoE/DATA: Connect to the Ethernet device with CAT5E or CAT6 UTP cable to transmit data.
Specifications
- Model: POE400
- Output Voltage: 56VDC
- PoE Power: 90W max
- Standard: IEEE 802.3af (15.4W)/at (30W)/bt (90W)
- Pin Polarity: 1/2(-)3/6(+),4/5(+)7/8(-)
- Data Rates: 10/100/1000Mbps IAC Input Voltage: 100 to 240 Vac
- Input Power Requirements: AC Input Current: 1A 100-240 Vac AC Frequency: 50 to 60 Hz
- Dimensions178.5mm x 80mm x 46mm
- Indicators: System indicator: AC Power User Indicator: Channel Power
- Connectors: Shielded RJ-45, EIA 568A and 568B
- Protection: Over current protection Overload protection Anti-interference protection
- Environmental Conditions: Maximum 80%, Non-condensing Storage Temperature:-20 to 70℃
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.cudy.com/
For support and warranty, please visit: http://www.cudy.com/. Specifications
are subject to change without notice. Cudy is a registered trademark of
Shenzhen Cudy Technologies Co., Ltd. Other brands and product names are
trademarks or registered trademarks of their respective holders.Copyright©2020
Shenzhen Cudy Technology Co., Ltd. All rights reserved.
EU Address: Otto esser 2c, 65451 Kelsterbach, Germany