dji 3591 4D Lidar Range Finder User Manual
- June 6, 2024
- DJi
Table of Contents
dji 3591 4D Lidar Range Finder User Manual
dji 3591 4D Lidar Range Finder User Manual
LiDAR Range Finder LiDAR Range Finder/Focus Motor Cable Hex Wrench
Screw C-Shaped DL Mount Ring LiDAR Range Finder Holder
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMOTM product. Carefully read this
entire document and all safe and lawful practices provided by DJI OSMO before
use. Failure to read and follow instructions and
warnings may result in serious injury to yourself or others, damage to your
DJI OSMO product, or damage to other objects in the vicinity. By using this
product, you hereby signify that you have read this document
carefully and that you understand and agree to abide by all terms and
conditions of this document and all relevant documents of this product. You
agree to only use this product for proper purposes.
You agree that you are solely responsible for your own conduct while using
this product and for any consequences thereof. DJI OSMO accepts no liability
for damage, injury, or any legal responsibility
incurred directly or indirectly from the use of this product. RONIN is a
trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as “DJI OSMO”) and
its affiliated companies. Names of products, brands, etc., appearing in this
document are trademarks or registered trademarks of their respective owner
companies. This product and document are copyrighted by DJI OSMO with all
rights reserved. No part of this product or document shall be reproduced in
any form without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the
sole discretion of DJI OSMO. This content is subject to change without prior
notice. For up to date product information, visit the product page for this
product at http://www.dji.com.
Warning
- It is not recommended to use the LiDAR range finder in conditions with low visibility such as foggy or rainy weather. Otherwise, the detection range may be reduced.
- DO NOT touch the optical windows of the LiDAR range finder. Dust and stains on the optical windows can negatively affect the performance. Use compressed air or a wet lens cloth to clean the optical windows
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>