PITAKA MBP1-01 MagEZ Power Bank User Manual
- June 6, 2024
- PITAKA
Table of Contents
PITAKA MBP1-01 MagEZ Power Bank
Features
- A 4000mAh wireless charging power bank.
- MagSafe compatible – attach an iPhone 12/13 Series device and MagSafe cases.
- LED lights indicate charging status.
- The power bank will double vibrate when its power drops belowl0%.
- A Type-C port for output and input.
- Built-in safety features, including overvoltage and overcurrent protection, overpower and short circuit protection, and electromagnetic field blocking.
Compatibility
- Attach MagSafe iPhone and MagSafe cases including MagEZ Case Pro 2 for iPhone 72 series, MagEZ Case 2 for iPhone 73 series, and New MagEZ Case Pro for iPhone 73 series.
- Qi wireless charging compatible.
Detail | Specification |
---|
Model
| ****
MB Pl–07
Width| 62mm
Length
| ****
97.3mm
Height/Depth
| ****
14.2mm
Battery Capacity| ****
4000 mAh
Type C Port Input| ****
DCSV/1.SA
Type C Port Input During Wireless Charging| ****
DCSV/2A
Type C Port Output
| ****
DCSV/1.SA
Wireless Output| SW
Transmission Distance
| ****
:-;Smm
Transmission Efficiency| ****
:-;75%
Operating Temperature| ****
-70 -30 C
Storage Temperature
| ****
-20-60 (
Quick Guide
- Charging Your Phone
- Push the power button to turn on the Battery Pack.
- Attach the Battery Pack to the back of your device.
- Charging Your Phone
- Slide it into the MagEZ Slider Dock.
- Or connect it to a power adapter via the Type-C port and plug the adapter into the electrical socket.
*Scan QR code for video instruction.
Buttons & LED Indicators
Click the button on the MagEZ Battery Pack to see the battery charging level. When clicking the button once, the LEDs will light up as shown below: Battery Percentage Indicator
- When the MagEZ Battery Pack is plugged in, the LED indicators will light up and blink based on the remaining battery.
- When charging your phone with the MagEZ Battery Pack, the LED indicators will light up based on the remaining battery.
- If no device is placed on the charging area, wireless charging will power down after 40 seconds. Double click the button on the MagEZ Battery Pack to turn off wireless charging.
FAQ
- Can I use the MagEZ Battery Pack on MagEZ Juice 1/2?
- • The MagEZ Battery Pack can be used with MagEZ Juice 1 or Juice 2 docks.
- Which devices and cases are compatible with MagEZ Battery Pack?
- MagEZ Battery Pack can attach to iPhone 72/13 series smartphones without a case or with the MagEZ Case Pro 2, MagEZ Case 2, New MagEZ Case Pro, Apple MagSafe Case, or third-party MagSafe compatible case.
*We cannot guarantee magnetic attachment to all 3rd party cases with MagSafe compatibility
Warranty
At PITAKA, we are always striving to provide our customers with the best quality products. The PITAKA MagEZ Slider is guaranteed for72 months from the date of purchase. The MagEZ Slider is warranted to be free of defects in materials and function under normal use. A defect is defined as an imperfection or flaw during the manufacturing process. The warranty is non- transferable and covers the original end-user purchaser. PITAKA will only authorize the warranty claim if the products were purchased from an official store or an authorized dealer. For full details regarding warranty terms and exclusions, please visit ipitaka.com/pages/shipping- warranty.
Exclusions & Limitations
Except for the limited warranty expressly set forth or to the extent
restricted or prohibited by applicable law, PITAKA expressly disclaims any
other warranties express or implied, including any warranty of quality,
merchantability, or fitness for a particular purpose, and you specifically
agree that PITAKA shall not be liable for any special, incidental, indirect,
punitive, or consequential damages of any type on any PITAKA product. In
addition to and without limiting the generality of the foregoing disclaimers,
the limited warranty does not, under any circumstances, cover the replacement
or cost of any electronic device or personal property inside or outside of the
PITAKA product.
Important
- Keep out of direct sunlight.
- Do not immerse in liquid.
- Operating Temperaturel4° F – 86° F (-10 -30 t).
- Storage Temperature -4° F -140° F (-20 – 60 t).
- Operating Humidity 4S-85% Relative Humidity.
- Storage Humidity 30-90% Relative Humidity.
- Do not disassemble or replace any part of the MagEZ Slider.
- Only use the Type C PD 30W charger to power the MagEZ Slider.
- Do not place any foreign objects between MagEZ Slider and the mobile phone, so as not to affect the charging performance of the product.
- Do not burn the wireless power bank or throw the wireless power bank into a fire, as it may cause an explosion.
- Do not discard the wireless power bank in an ordinary garbage bin.
- The product should be charged once every 3 months during storage.
Customer Service
Tel: +852 9202 6223 Email: support@ipitaka.com Web:
www.ipitaka.com
Legal
The manufacturer is not responsible for any damages to any device incurred
through the use of this product. The manufacturer shall not, in any way, be
liable to you or to any third party for any damages you or any third party may
suffer as a result of use, intended or unintended, or misuse of this product
in conjunction with any device or accessory other than the appropriate device
for which this product is designed. The manufacturer will not be responsible
for any damages you or any third party may suffer as a result of the misuse of
this product as outlined above. The purchaser agrees to defend, indemnify, and
hold the manufacturer harmless for any claims or damages arising from
unintended use or misuse, including use with an unintended device.
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.
FCC ID: 2ARIS-MBP7-0l CE@!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>