PITAKA MagEZ Pro 2 Car Mount with MagSafe Charger User Guide
- October 31, 2023
- PITAKA
Table of Contents
MagEZ Car Mount Pro 2
Quick Guide
Info
| Model | B2302 |
|---|---|
| Material | Aramid fiber + PC + ABS |
| Input | 5V/3A, 9V/2A, 12V/1.5A |
| Output | 5W/7.5W/10W/15W Max |
| Ball head | 17mm |
Package Includes:
Quick Guide
-
Attach the mount to the air vent hook and secure it by turning the bolt .
-
Fasten the Air Vent hook onto the air vent grille.
-
Turn the lock to secure the hook in place.
-
Plug the cable into the MagEZ Car Mount Pro USB port, and the other end of the cable into your car adapter. Plug the adapter into the car’ s power outlet.
-
Attach your device.
| Scan QR code for video instruction | Scan to check how to use NFC |
|---|
https://www.youtube.com/playlist?list=PLqCX4DFCLQrGf5qJ4kZbRFnlOLoteq_dN
|
https://www.ipitaka.com/pages/pitalink-guide
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off ff and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance
of 20cm between the radiator &your body.
IC Warning
This device complies with Industry Canada’ s licence-exempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
IC RF Statement: When using the product, maintain a distance of 1 0cm from the
body to ensure compliance with RF exposure requirements.