SINOX SXEC1635 Charging Cable Instruction Manual
- June 6, 2024
- SINOX
Table of Contents
SINOX SXEC1635 Charging Cable Instruction Manual
How to use mode 3
| Female plug
---|---
| male plug
| You start a session at
a charging point using a registered RFID card.To start a session, hold your
RFID card in front of the RFID symbol beneath the display on the front of the
charging point.
| After successful
authorization the charging point is ready and the sockets are opened. Plug
your charging cable into either the right or the left side.
| Now connect your
charging cable to your EV.
| As soon as the
connection between the vehicle and the charging point is established, the
charging cable will be locked and the charging process will start.
| You can end the
charging process by again holding your RFID card in front of the RFID symbol.
The plug will be unlocked.
| The plug attached to
the EV can now be pulled out.
| Pull the plug out of
the charging point.
Customer Support
Troensevej 11. DK-9220 Aalborg.
www.sinox-europe.com
