SINOX SEV5000 6A Portable EV Charger User Manual

SINOX SEV5000 6A Portable EV Charger User Manual

PRODUCT DESCRIPTION

The SINOX Portable EV Charging Cable is a convenient, portable, and plug-and- play way to Power your Electric Car. This product is independently researched and accordance with all the latest national standards. It can be used on any EV cars. This cable delivers a high performance when charging with the reassurance of advanced electric protections and direct human-computer interaction interface. The control box enjoys an ergonomic surface design which makes the shell become both solider and stronger.

Appearance

6A EV Charger with EU Schuko Plug

SPECIFICATION

Output Detection

| 1. Short circuit protection2. Over and under frequency protection3. Over Current Protection4. Leakage Current Protection (restart recover)5. Over Temperature Protection6. Overload protection (self-checking recover)7. Ground Protection8. Over voltage and under-voltage protection
OperatingTemperature| -25 ~+55
Storage Temperature| -40 ~+80
Operating Humidity| 20%-85%
EV Charger BoxDimension| 200mm(L) X 93mm(W)X51.5mm(H)
Cable Length| 5.0m
Weight| 2.30kg
Standard| IEC 62752, IEC 61851
Carton Measure| 42CM42CM8CM

LED DISPLAY

Out
Connected Mode| Light on| Twinkle(1S)| Lights Out| Lights Out
Charging Mode| Racing Light| Racing Light| Racing Light| Lights Out
Finished Mode| Light on| Light on| Light on| Lights Out
Fault(Red)| Lights Out| Lights Out| Lights Out| Twinkle**

HOW TO ADJUST SETTING

The Charger is set to 6A.

OPEARATING INSTRUCTION

How to start charging
Step 1. Take out the charger and firmly insert the plug into your Power socket-outlet.
Step 2. Remove the cap on the connector and completely plug the vehicle connector into vehicle inlet.
Step 3. The device will start charging automatically when the READY/ CHARGE, POWER indicators are all green.
Step 4. The Factory default current setting is 6A (see CAUTION).
Step 5. We recommend that the charging cable is not used for more than 2 hours.

How to stop charging
Step 1. Press the Power/Ampere adjustment button and disconnect the vehicle connector from the vehicle inlet.
Step 2. Close protective cap of vehicle inlet and put on the protective cap of the vehicle charging connector.
Step 3. Disconnect the plug from the Power source socket-outlet.
Step 4. Pack up the EV charger cable and put it into the bag.

CAUTION

• Have a professional electrician check that each Power source socketoutlet to which the cable is to be connected complies with the applicable standards and regulations in your country, and in particular that it has:
  • A HFI / PHFI relay, which only supplies outlets for chargers
  • A fuse / aut. fuse that only supplies outlets to the charger
  • Earth
  • Cable with a cross-sectional area that can supply the charger
  • A Power source socket with dedicated connection without switch
  • HFI relay
• Before connecting the cable, check the nominal voltage and make sure that the socket and the mains have sufficient power to charge your car. The maximum rated voltage varies between countries and suppliers.
• Do not use a connector that shows signs of wear, overheating, damage, or discoloration.
• Keep the charging cable out of the reach of children.
• Do not use extension cords, connectors, or adapters.
• Avoid touching the cable connector, the socket, or the vehicle’ s charging connector.
• The cable must not be disassembled or modified in any way.
• Do not use the charging cable near water, in case of corrosion or if thereare foreign objects in the cable connector.
• If a malfunction or anomaly occurs, or if the ERROR warning light comes on or flashes, stop using the cable immediately. See the guide on the meaning of the indicators.
• Do not use the cable if parts are broken, frayed, open or show other signs of damage.
• Use the cable gently, avoid dropping it, run over it and do not pull hard on it.

WARRANTY

This Charging equipment has been subjected to high pressure inspection testing, and extensive product trial, so the customer can be assured of the highest quality and performance. This product is covered by a one year Warranty to cover product failure or quality problems. Any product issues due to improper handling, installation, use and maintenance negligence which might lead to product damage or to a situation where the product cannot be used properly, are not included in this warranty. The warranty is only valid to the original purchaser and is not transferable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>