SINOX SEV5000 Portable EV Charging Cable User Manual

SINOX SEV5000 Portable EV Charging Cable

Product Information

Specifications

• Item: Mode 2 EV Charger Cable 6A
• Model: SEV5000 / SXEC1615
• Installation: Portable, Plug and Play
• Output Current: 6A Max.
• Rated Power: 1.35 KW Max
• Input Voltage AC: 110V~250V 50Hz/60Hz
• Waterproof Degree: IP66
• Output Detection:
  • Short circuit protection
  • Over and under frequency protection
  • Over Current Protection
  • Leakage Current Protection (restart recover)
  • Over Temperature Protection
  • Overload protection (self-checking recovery)
  • Ground Protection
  • Over-voltage and under-voltage protection
• Operating Temperature: -25°C to +55°C
• Storage Temperature: -40°C to +80°C
• Operating Humidity: 20%-85%
• EV Charger Box Dimension: 200mm(L) x 93mm(W) x 51.5mm(H)
• Cable Length: 5.0m
• Weight: 2.30kg
• Standard Carton Measure: 42cm x 42cm x 8cm

Product Usage Instructions

How to Start Charging

1. Take out the charger and firmly insert the plug into your power socket outlet.
2. Remove the cap on the connector and completely plug the vehicle connector into the vehicle inlet.
3. The device will start charging automatically when the AC and EV indicators are all green.
4. The charger’s default current setting is 6A (see CAUTION).
5. We recommend that the charging cable is not used for more than 2 hours.

How to Stop Charging

1. Stop the charging (follow your car manufacturer’s instructions) and disconnect the vehicle connector from the vehicle inlet.
2. Close the protective cap of the vehicle inlet and turn off the protective cap of the vehicle charging connector.
3. Disconnect the plug from the power socket outlet.
4. Pack up the EV charger cable and put it into the bag.

Frequently Asked Questions (FAQ)

• Q: What is the warranty for the product?
  A: This Charging equipment comes with a one-year warranty against product failure or quality problems. Warranty covers issues related to high-pressure inspection testing and extensive product trials. It is valid only for the original purchaser and is not transferable. Please note that the warranty does not cover product issues due to improper handling, installation, use, maintenance negligence, or situations where the product cannot be used properly.

Please read all instructions before using, operating or maintaining.

PRODUCT DESCRIPTION

The SINOX Portable EV Charging Cable is a convenient, portable, and plug-and- play way to Power your Electric Car. This product is independently researched and by all the latest national standards. It can be used on any EV car. This cable delivers high performance when charging with the reassurance of advanced electric protections and a direct human-computer interaction interface. The control box enjoys an ergonomic surface design which makes the shell both solider and stronger.

Appearance

6A EV Charger with EU Schuko Plug

SPECIFICATION

2. Over and under frequency protection

3. Over Current Protection

4. Leakage Current Protection (restart recover)

5. Over Temperature Protection

6. Overload protection (self-checking recovery)

7. Ground Protection

8. Over-voltage and under-voltage protection

Operating

Temperature

| -25 ~+55
Storage Temperature| -40 ~+80
Operating Humidity| 20%-85%
EV Charger Box

Dimension

| 200mm(L) x 93mm(W) x 51.5mm(H)
Cable Length| 5.0m
Weight| 2.30kg
Standard| IEC 62752, IEC 61851
Carton Measure| 42CM42CM8CM

LED DISPLAY

Condition

| LED Display Status
---|---

Green(One)

|

Green(Two)

|

Green(Three)

|

Fault(Red)

Initial Mode| Light on| Lights Out| Lights Out| Lights Out
Connected Mode| Light on| Twinkle(1S)| Lights Out| Lights Out
Charging Mode| Racing Light| Racing Light| Racing Light| Lights Out
Finished Mode| Light on| Light on| Light on| Lights Out
Fault(Red)| Lights Out| Lights Out| Lights Out| Twinkle

HOW TO ADJUST SETTING

The Charger is set to 6A.

OPERATING INSTRUCTION

Charging

How to start charging

1. Step 1. Take out the charger and firmly insert the plug into your Power socket outlet.
2. Step 2. Remove the cap on the connector and completely plug the vehicle connector into the vehicle inlet.
3. Step 3. The device will start charging automatically when the READY/CHARGE, POWER indicators are all green.
4. Step 4. The Factory default current setting is 6A (see CAUTION).
5. Step 5. We recommend that the charging cable is not used for more than 2 hours.

How to stop charging

1. Step 1. Stop the charging (follow your car manufacturer’s instructions) and disconnect the vehicle connector from the vehicle inlet.
2. Step 2. Close the protective cap of the vehicle inlet and put on the protective cap of the vehicle charging connector.
3. Step 3. Disconnect the plug from the Power source socket-outlet.
4. Step 4. Pack up the EV charger cable and put it into the bag.

WARRANTY

This Charging equipment has been subjected to high-pressure inspection testing, and extensive product trials, so the customer can be assured of the highest quality and performance.

This product is covered by a one-year Warranty to cover product failure or quality problems. Any product issues due to improper handling, installation, use and maintenance negligence which might lead to product damage or to a situation where the product cannot be used properly, are not included in this warranty. The warranty is only valid to the original purchaser and is not transferable.

CAUTION

• Have a professional electrician check that each Power source socket- outlet to which the cable is to be connected complies with the applicable standards and regulations in your country, and in particular that it has:
  • An HFI/PHFI relay, which only supplies outlets for chargers
  • A fuse/aut. fuse that only supplies outlets to the charger
  • Earth
  • CA cable with a cross-sectional area that can supply the charger
  • A Power source socket with a dedicated connection without a switch
  • HFI relay
• Before connecting the cable, check the nominal voltage and make sure that the socket and the mains have sufficient power to charge your car. The maximum rated voltage varies between countries and suppliers.
• Do not use a connector that shows signs of wear, overheating, damage, or discolouration.
• Keep the charging cable out of the reach of children.
• Do not use extension cords, connectors, or adapters.
• Avoid touching the cable connector, the socket, or the vehicle’s charging connector.
• The cable must not be disassembled or modified in any way.
• Do not use the charging cable near water, in case of corrosion or if there are foreign objects in the cable connector.
• If a malfunction or anomaly occurs, or if the ERROR warning light comes on or flashes, stop using the cable immediately. See the guide on the meaning of the indicators.
• Do not use the cable if parts are broken, frayed, open or show other signs of damage.
• Use the cable gently, avoid dropping it, or running over it and do not pull hard on it.

Sinox Europe A/S
Troensevej 11. DK-9220 Aalborg.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>