SINOX SXL4030 Travel30 Bluetooth Speaker Instruction Manual

SXL4030 Travel30 Bluetooth Speaker
Instruction Manual

BLUETOOTH CONNECTION

Step 1 Power on
Long press ” 0″ button for 2S, you will hear a prompt tone of power on. After that, the blue indicator light will flash quickly and enter into the bluetooth pairing status.

Step 2 Choose the device
Find ‘SXL4030″ in your Bluetooth list and select it.

Step 3 Pairing successfully
The indicator will keep blue once pairing is done, then you can access to music.

TWS FUNCTION

Operation Instruction

1. Turn on the two speakers, blue indicators will flash.
2. Short press ” —+” button at same time from one speaker only, they will enter into tws pairing mode with sound notification.
3. After 1-2 seconds, the two speakers will pair automatically. There will be o “du” sound notification when two speakers connect successfully, meanwhile, sub-master speaker will keep blue and master speaker will keep flashing.
4. Open the setting and find “SXL4030” from mobile, click it and then your mobile will pair with the two speakers.
5. Short press “+ – “ button again to disconnect TWS.

Notice: For TWS pairing, pls let the two speakers connect first, then connect the speakers with mobile phone.

BASIC OPERATION

Power/ Multifunction button

• Long press 2 for 2s to power on/ off
• Short press e to answer on Incoming call/end a call conversation
• Short press ® twice to reject the caii when receive a call
• Short press ® to ploy/ pause during music playing
• Short press ©twice to disconnect Bluetooth

Volume buttons/Previous & Next track Buttons

• Short press 1 to turn volume down In each mode
• Long press 1 to switch to previous frock in Bluetooth and TF cord mode
• Long press 1 to switch to previous radio In FM mode
• Short press (3) to turn volume up In each mode
• Long press 3 to switch to next track In Bluetooth and TF card mode Long press e to switch to next radio In FM mode

Mode button

• Short press ® to switch between Bluetooth/ FM/ TF mode Long press to search radio during FM mode

How to operate the FM function?
Short press “m- button to switch to FM mode. you will hear a prompt tone with TM mode( also. Long Press -cy to start searching channels. press-O” button to pause channels searching and it will start to play radio. Long press “+-“ to switch channels from the ones you searched earlier.

INTERFACE INSTRUCTIONS

successfully.
Blue indicator fight wife flash quickly when Bluetooth signal is out of range and specter wibe off automatically if not connected over 10 mins.
TF card mode| insert TF cad. blue indicator Ight wi flash slowly during playing; blue indicator will keep still when pause must.
FM mode| Baenid cateacint wife flash sticky ending channels seating Blue indicator light will flash slowly during radio playing Blue indicator fight will keep on when pause.
Charging mode| Red indicator Ight MI keep on when charging, red indicator light wipe off when charging is done.
Low  battery| You Wailea an alert tone, LED indicator sold Blue.

PRODUCT SPECIFICATION

FREQUENTLY ASKED QUESTIONS

Q: What kind of charger should we use for the Speaker?

A: All common USB chargers can be used. while we suggest the ones 5Vi2A or above 2A.

Q: What If there is noise or discontinuous sound during playing?

A: The speaker can be normally used within 1 pm under no obstruction environment. If it is beyond 10m or with Obstruct 'On. there might he noise or discontinuous sound.

Q: Why the smacker power off cutomaticcIfy aRer POwer on but no Bluetooth disconnection?

A: When there is no Bluetooth pairing in 10 minutes, the speaker Wail shut down automatically to reduce power consumption.

Q: Why does the speaker cannot connect the once-paired cellphone?

Q: The speaker cannot be started up in a normal situation?

A: Please plug in the charger and try In a few minutes or try to long press power button 10-30s to reset.

 **

Notes:

1. Please read this manual carefully before use and keep it property.
2. For the first use, please fully charge the product.
3. Pls use certified adapter that has passed notional safety certification.
4. If you do not use the product for a long time, be sure to charge it once within a month at least to maintain its performance.
5. Do not use this product in an extremely cold or hot environment, such as temperature beyond the range of 5°C-35°C. If use it beyond the above range, the product may stop automatically to protect the internal circuit.
6. When charging it in a high temperature environment the product may automatically stop charging to protect the battery. At this time, the charging indicator usually flashes quickly to Indicate that the charging environmental temperature or the product internal temperature is too high.
7. Storage environment temperature: -5°C-359C RH -c 70% (recommended 25t±.5*C1.

Important safety instructions:

1. Do not disassemble or repair this speaker personally, otherwise It may cause product damage or personal injury.
2. Do not use it in dusty, humid, city, and high-temperature environment.
3. Do not place this product near a heat source, or a place with direct sunlight, a lot of dust. or mechanical vibration.
4. in order to reduce the risk of fire. please do not cover this product with news Papers, tablecloths. curtains etc.. during use.
5. If the product has a waterproof feature. please do not exceed the nominal parameter range when using it.
6. When the product is damaged such as the power cord or plug is damaged, liquid enters or objects fall into the device. unable to operate normally or Pots, it must be repaired.
7. When the product is fully charged, do not connect it to the charger for further long time charging.

*This speaker suppose mobile Oenomel and tablet PCs etc. Here this user Manual b Illustrated based on mobile phones.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>