ATOMOS ATOMSHB002 Shinobi 7-Inch 4K HDMI/SDI Monitor User Guide

June 6, 2024
ATOMOS

SHINOBI 7
QUICK START GUIDE

Introduction

Thank you for purchasing the Atomos Shinobi 7, utilizing professional HD-SDI and HDMI connectivity to monitor up to professional 4Kp60 (via HDMI) and 1080p60 (via 3G-SDI). The class-leading AtomHDR monitor lets you visualize 10+ stops of dynamic range, with 2200nits brightness for daylight viewing and 10-bit processing for smooth gradations. Please take the time to read through this Quick Start Guide and register your product for free updates.
DOWNLOAD THE FULL SHINOBI 7 USER MANUAL www.atomos.com/support

Checklist

  • 1 x Shinobi 7
  • 1 x AC Power Adaptor
  • 1 x Quick Start Guide

You will also need

(sold separately)

SDI Cable
SDI cables are robust physically and electrically. You should arely have problems with signal transmission unless your cables are either damaged or too long. Please remember that SDI cables use locking connectors and will not simply pull out if they are pulled or tripped over. They are therefore a significant trip hazard, and also a hazard to your equipment, which may be damaged if the cables are mishandled or of a low grade. Please ensure you test and check your SDI cables; for longer runs cables of a Belden, 1694A specifications is recommended.

HDMI Cable
Atomos have a range of HDMI cables with die-cast connectors and coiled cables in a range of lengths and connections (sold separately).

Atomos have a range of accessories tailored to usage with the Shinobi 7. Visit your nearest Atomos reseller to discover the range of available accessories that will get you up and
running enhances your production workflow.

Batteries and power:

  • ATOMOS 5200mAh 4 Cell NPF Style Battery NP-770
  • ATOMOS 7800mAh 6 Cell NPF Style Battery NP-970
  • ATOMOS Fast Battery Charger with Multi plug PSU
  • ATOMOS Power Kit for all Atomos 5” & 7” Monitor Recorders

Cables:

  • ATOMOS AtomFLEX HDMI 4K60p Full to Full (30cm/40cm/50cm)
  • ATOMOS AtomFLEX HDMI 4K60p Full to Micro (30cm/40cm/50cm)
  • HDMI Coiled cable 4Kp30 Full to Full (30cm/50cm)
  • HDMI Coiled cable 4Kp30 Full to Micro (30cm/50cm)

Getting started

Power
You can power the device using the supplied AC power supply, but if you plan to use a battery we recommend you fully charge before use.
Choosing the right battery for your application

Battery time (Based on 7.4V) Monitor mode

2600mAh – 1.0hr
5200mAh – 2.0hrs
7800mAh – 3.5hrs

We recommend using Atomos NP-F series batteries.

Connect and power-up

Battery
Shinobi 7 provides dual battery slots that combined with the DC input allow for continuous power operation. With both batteries connected Shinobi 7 will draw power from them simultaneously, if a battery is removed it will automatically switch over to the second battery or the DC power input. This allows you to swap out a depleted battery without having to shut down the monitor.
Touching the battery icons in the top right of your screen will allow you to accurately see remaining battery life. Refer to the User Manual for more information.
AC/DC Power
Alternatively, power your Shinobi from mains power using the included AC Power Adaptor. Simply attached the AC power adaptor to mains power, carefully attach to the DC port on the Shinobi 7, and rotate the locking nut to secure.
The DC input port can also be used with the optional Atomos DTAP to DC cable (ATOMDTPCB2) to supply power to the Shinobi 7 from a DTAP power output. Battery indicators will show that no batteries are attached and the unit is being powered via DC power input.

Input

Access Input Menu IN
To access the Input Menu simply tap the INPUT (IN) area located in the top left of the Shinobi screen.
Choose signal – HDMI or SDI
SOURCE
Displays the input source currently connected to the Shinobi, simply tap to toggle between HDMI & SDI inputs. You can have both HDMI and SDI inputs connected at the same time and use this menu to toggle between active inputs.

Physical features

On/Off and Screen Lock
To turn the Shinobi 7 on, press the power button. To shut down, hold the button for at least 4 seconds (until the unit turns off).
SDI In
The SDI inputs support 3G in both level A and B standards.
SDI Out
This is for connection to an external monitor or another device with an SDI input. It carries a loop-through of the incoming SDI (limited to 3G 1080p60) or HDMI signal in monitor and standby mode.
HDMI In
HDMI input connected to the Shinobi 7 supports up to 4Kp60.
HDMI Out
HDMI output connection from the Shinobi 7 supports up to 4Kp60.
Remote Calibration Port
The Shinobi 7 screen can be calibrated using the X-Rite i1 Display Pro. To connect you will need a USB to serial cable. (ATOMCAB004)
Battery Release
Press the release buttons and slide batteries upwards to remove them.
Headphone / Audio out
Standard 3.5mm audio output for audio monitoring.
Screw Holes / Mounts + LockPin Holes (Arri)
1/4″ screw hole top and bottom.
SD Card Slot
Use SD cards to load LUTs and/or update the firmware.

Physical features

Ensure correct orientation when inserting SD cards. Never force the SD card. If having difficulty check the orientation of the card is correct. Card should be formatted in FAT32.

Touchscreen / User Interface

Monitor assist tools

| Zoom 1:1
Punch in and check
critical focus across 4K
images.| | Luma Waveform
A great way to visualize
the dynamic range of your image.| | Vectorscope Zoom
8x of the center of the
vectorscope. Useful when setting white balance.
---|---|---|---|---|---
| Zoom x2
Punch in and check
critical focus.| | RGB Parade
Monitor the level of red,
green, and blue from an
input source.| | Histogram
Visualize your exposure
over the entire image.
| Zoom x4
Punch in and check
critical focus (x4).| | RGB Overlay
Monitor the level of red, green, and blue from an input source.| | Blue Only Exposure
Observe the noise content of a video image.
| Focus Peaking
Ensure your recordings are
always in focus.| | RGB Histogram
Visualize the distribution of
colors in an image.| | Frame Guides
Frame guides for Cinema, TV, and social media.
| Zebra Pattern
Use Zebra to check
exposure and set exposure
levels.| | Analysis
Show video, waveform,
histogram and vectorscope
simultaneously.| | Safe Areas
Action area and title safe
areas displayed.
| False Color
A visualization of exposure across the image| | Vectorscope
This is useful for checking
if an image is under or oversaturated.| | Anamorphic Desqueeze
Allows you to correctly
view images when using
anamorphic lenses

Warranty & Conditions

Notice
Copyright © 2021 ATOMOS Global Pty Ltd (‘referred to as ATOMOS’). All rights reserved. All information in this document is subject to change without notice. No part of the document may be reproduced or transmitted in any form, or by any means, electronic or mechanical, including photocopying or recording, without the express written permission of ATOMOS. A reference to ATOMOS includes its related entities, subsidiaries, and parent company.
Trademarks
Shinobi 7 / ATOMOS are registered trademarks of ATOMOS Pty Ltd. Apple, the Apple logo, AppleShare, AppleTalk, FireWire, iPod, iPod Touch, Mac, and Macintosh are registered trademarks of Apple Inc. Final Cut Pro, QuickTime, and the QuickTime Logo are trademarks of Apple Inc. All other trademarks are the property of their respective holders.

International Hardware Limited Warranty (1 Year Standard/3 Years if registered) ATOMOS warrants that:

  • The main product, not including the IPS screen, or any external accessories, will be free from defects in materials and workmanship for a period of 1 year from the date of purchase; or 3 years upon completion of product registration within 1 year from the date of purchase at www.atomos.com
  • The TFT/LCD, batteries, case, and master caddies will be free from defects in materials and workmanship for a period of 1 year from the date of purchase regardless of registration. This warranty is exclusively for the benefit of the original purchaser and is not assignable or transferable. If during the warranty period the product is shown to be defective ATOMOS may at its option:
    a) replace the goods or supply equivalent ones,
    b) repair the goods,
    c) pay the cost of replacing the goods or of acquiring equivalent ones, and
    d)paying the cost of having the goods repaired; The customer must notify ATOMOS of any defect in the goods in writing prior to the expiry of the warranty periods set out above. The customer will be solely responsible for returning the goods to ATOMOS or its authorized distributor. Upon acceptance of a warranty claim by ATOMOS, where ATOMOS repairs or replaces the goods, it will be responsible for reasonable shipping costs incurred in sending the goods to the Customer, provided that the customer is located in a country in which ATOMOS has an authorized distributor or repair center or agent.

Warranty Exclusions
This warranty applies only to defects in workmanship and does not cover defects caused by:

  • A failure to comply with the then-current operating instructions issued by ATOMOS;
  • Neglect;
  • Improper or negligent acts or omissions;
  • Unauthorized repairs or attempted repairs;
  • Tampering with or modification of the goods;
  • Connection to incompatible equipment or power sources;
  • Exposure to water or weather;
  • Exposure to magnetic fields or corrosive liquids or substances;

EXCEPT AS STATED IN THIS WARRANTY, ATOMOS, ITS VENDORS, AGENTS, RESELLERS, AND DISTRIBUTORS DISCLAIM IN THEIR ENTIRETY ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES OUTLINED IN THIS WARRANTY ARE THE EXCLUSIVE REMEDY A CUSTOMER HAS ARISING FROM DEFECTIVE GOODS WHICH ARE SUBJECT TO THE WARRANTY. ATOMOS DOES NOT WARRANT THAT THE GOODS WILL OPERATE IN A MANNER THAT IS ERROR-FREE, OR UNINTERRUPTED. THE GOODS ARE NOT INTENDED TO BE THE PRIMARY OR ONLY DATA STORAGE DEVICE
FOR DATA – CUSTOMERS ARE SOLELY RESPONSIBLE FOR THE BACKUP AND PROTECTION OF DATA.

Software License Agreement
IMPORTANT, PLEASE READ CAREFULLY. THIS IS A LICENSE AGREEMENT.
This ATOMOS software, related documentation, any included sample images, and other files (the “Software”), is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The Software is licensed, not sold. This End User License Agreement (“EULA”) is a legal agreement between you(either an individual or a single entity) and ATOMOS with regard to the copyrighted Software provided with this EULA. Use of the Software provided to you by ATOMOS in whatever form or media will constitute your acceptance of these terms unless separate terms are provided by the software supplier, in which case certain additional or different terms may apply. If you do not agree with the terms of this EULA, do not download, install copy or use the Software. By installing, copying, or otherwise using the Software, you agree to be bound to the terms of this EULA. If you do not agree to the terms of this EULA, ATOMOS is unwilling to license the Software to you.

Notifications

  1. Eligible licensees. This Software is available for license solely to purchasers of the ATOMOS Shinobi 7, who have purchased a unit manufactured by ATOMOS Shinobi 7 and purchased through an ATOMOS authorized reseller, with no right of duplication or further distribution, licensing, or sub-licensing.
  2. License Grant. ATOMOS grants you a personal, non-transferable, and non-exclusive right to use the copy of the Software provided with this EULA. You agree you will not copy the Software except as necessary to use it with the ATOMOS Shinobi 7. You agree that you may not copy the written materials accompanying the Software. Modifying, reverse engineering, translating, renting, copying, transferring, or assigning all or part of the Software or any rights granted hereunder, to any other persons or reverse-engineering the hardware on which the Software runs, is strictly prohibited. The software is licensed, not sold. You acknowledge that no title to intellectual property in the Software is transferable to you. You further acknowledge that title and full ownership rights to the Software will remain the exclusive property of ATOMOS and/ or its suppliers, and you will not acquire any rights to the Software, except as expressly set forth above. All copies of the software will contain the same proprietary notices as contained in or on the Software. All title and copyrights in and to the Software (including but not limited to any images, animations, video, audio, text incorporated), the accompanying printed materials, and any copies of the Software are owned by ATOMOS or its suppliers.
  3. Reverse engineering. You agree that you will not attempt, and if you are a corporation, you will use your best efforts to prevent your employees and contractors from attempting to reverse compile, derive circuits, modify, translate or disassemble the Software and/or the ATOMOS Shinobi 7 in whole or in part. Any failure to comply with the above or any other terms and conditions contained herein will result in the automatic termination of this license and the reversion of the rights granted hereunder by ATOMOS. ATOMOS reserves the right to terminate this license without prejudice to any additional recourse ATOMOS may have against you if you violate any of its terms and conditions.

USA
WARNING: This product contains the chemical lead (Pb) which is known to the State of California to cause cancer. For more information, visit p65warnings.ca.gov

For more detailed instructions and important up-to-date information regarding
Shinobi 7 please download the complete Shinobi 7 User Manual from:
www.atomos.com/support
atomos.com
© Atomos 2021. TM ® All trademarks and registered trademarks are the property of their respective owners.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals