ATOMOS NINJA V 5 4K HDMI Recording Monitor User Guide

ATOMOS NINJA V 5 4K HDMI Recording Monitor

Introduction

Thank you for purchasing the Atomos Ninja V, utilising professional HDMI 2.0 connectivity to record professional 4Kp60 and High frame rate HD to Apple ProRes and Avid DNxHR. The class-leading AtomHDR monitor lets you visualize 10+ stops of dynamic range, with 1000nit brightness for daylight viewing and 10-bit processing for smooth gradations. With so many Recorder, Monitor, Playback & Edit features, please take the time to read through this Quick Start Guide and register your product for free updates and extended warranty.

• DOWNLOAD THE FULL NINJA V USER MANUAL www.atomos.com/support
• ACTIVATE AVID LICENSE FOR DNxHD® and DNxHR® www.atomos.com/activation
• EXTENDED 3 YR WARRANTY Register now to extend your warranty to 3 years from date of purchase. www.atomos.com/registration

Checklist

• 1 x Ninja V Recorder
• 1 x Master Caddy II
• 1 x AC Power Adaptor
• 1 x Battery Eliminator
• 1 x Quick Start Guide

You will also need (sold separately)

HDMI Cable
To support 4Kp60 recording please use cables that support HDMI 2.0 specification. Atomos have a range of 4Kp60 cables with die cast connectors and coiled cables in a range of lengths and connections (sold separately). See the full range of Atomos HDMI cables on our website: www.atomos.com/hdmi- cables

SSD Drives and Docking Station
We test and approve SSD drives from the world’s leading media brands. Specific approved drives depend on the resolution and frame rate you are capturing – for the full list of compatible drives please refer to: www.atomos.com/drives We also have a range of Docking Stations suitable for use with Ninja V and compatible SSD media. Visit your nearest reseller or purchase online at: shop.atomos.com

Getting started

Battery
You can power the device using the supplied AC power supply and Battery Eliminator, but if you plan to use a battery we recommend you fully charge before use.

Choosing the right battery for your application

• We recommend using Atomos NP-F series batteries.

Connect SSD
Before powering up the Ninja V unit, simply slide your selected disk into disk slot (see page 7). To remove, ensure the unit is off and gently slide out. We strongly recommend SSD for optimal performance and recording.

IMPORTANT: Never remove the SSD whilst recording as this may cause data corruption.

Introducing AtomX SSDmini
Atomos has teamed with the world’s leading media manufacturers to design SSD media that is better suited to our ever evolving Recorder Monitors. The new AtomX SSDmini is a little over 1/4 inch tall and 3” long. It is also 20% shorter than traditional SSDs, yet keeps the standard SATA III connector. It is backward compatible with previous Atomos devices by adding a clever extension handle. These tiny, slimline SSDs are a true innovation and our close drive partners Angelbird and Sony Storage Media Solutions Corporation are making custom versions for your Ninja!

• For more information about supported drives and accessories, visit: www.atomos.com/drives

Connect and power-up

Battery
Ninja V has a single battery slot. To connect a compatible battery, place the battery in front of the retaining lug, align it with the connectors and slide the battery into the lock position. To connect the supplied Battery Eliminator, follow the same procedure and lock battery into position. Once the Battery Eliminator is in place, secure the supplied AC/DC power supply to the DC jack. Alternatively, the Ninja V unit can be powered via a D-Tap power source using a D-Tap battery cable (ATOMDTPCB1). Touching the Battery icon in the top right of your screen will allow you to accurately see the remaining battery life. Refer to the User Manual for more information.

Expansion Port
The Ninja V features a built in Expansion Port that will soon enable

• Synchronization control
• I/O Expansion
• Continuous Power Module

Physical features

On/Off and Screen Lock
To turn the Ninja V on, press the power button on the side of the unit. To shut down, hold the button for at least 4 seconds (until unit turns off).

Remote Control/LANC and Calibration
Optionally control the Ninja V using LANC/Remote from your camera. Additionally, the Ninja V screen can be calibrated using the X-Rite i1Display Pro. To connect you will need a USB to serial cable. Refer to the AtomX accessory range. USB to serial cable (ATOMCAB004).

HDMI In/Out
HDMI input connection used to record to the Ninja V supports up to 4Kp60. HDMI Output connection provides a live loop out or play out when in Playback mode. Supports up to 4Kp60.

Battery Release Button
Press the release button and slide the battery away from the unit to remove it.

Tally Light
Red Tally light on the rear of the unit indicates active recording. The Tally Light can be turned off in the menu options.

Screw Holes / Mounts + Locking Pin Holes (Arri)
3/8” screw hole with 1/4” adapter. Top and bottom.

Disk Slot
The NinjaV is compatible with Master Caddy II media and also the latest AtomX SSDmini.

Touchscreen / User Interface

Main controls
The Ninja V is controlled by a simple user-friendly touchscreen interface. Pictured below is the home screen and main controls seen when the Ninja V is first powered up. Touching the icons will open menus for the relevant functions. Touch the settings icon located on bottom right to access more menus, or touch individual icons for specific settings such as timecode, audio, remaining disk space and more. For the most up-to-date information visit: atomos.com/ninjav and click the SUPPORT tab

Connect and Edit

To access and edit your recorded material
You will require a USB 3.0 Docking Station or USB-C 3.1 Docking Station. These are available from your reseller, or visit shop.atomos.com to purchase the Docking Station that is best suited to your requirements. Connect the Docking Station to a Mac® or Windows® editing workstation via USB 2.0 / USB 3.0 / USB-C 3.1 compatible port/s. When using USB 2.0, you may need to connect the second USB power cable on the dock to a second USB 2.0 port. This will ensure enough power is provided when using USB 2.0. Insert SSD it into the Docking Station. After a short wait your recorded video will become accessible as a standard external disk.

Warranty & Conditions

Notice
Copyright © 2018 ATOMOS Global Pty Ltd (‘referred to as ATOMOS’). All rights reserved. All information in this document is subject to change without notice. No part of the document may be reproduced or transmitted in any form, or by any means, electronic or mechanical, including photocopying or recording, without the express written permission of ATOMOS. A reference to ATOMOS includes its related entities, subsidiaries and parent company.

Trademarks
Ninja V / ATOMOS are registered trademarks of ATOMOS Pty Ltd. Apple, the Apple logo, AppleShare, AppleTalk, FireWire, iPod, iPod Touch, Mac, and Macintosh are registered trademarks of Apple Inc. Final Cut Pro, QuickTime and the QuickTime Logo are trademarks of Apple Inc. All other trademarks are the property of their respective holders.

International Hardware Limited Warranty (1 Year Standard/3 Years if registered)

ATOMOS warrants that:

• The main product, not including the IPS screen, or any external accessories, will be free from defects in materials and workmanship for 1 year from the date of purchase; or 3 years upon completion of product registration at www.atomos.com
• The TFT/LCD, batteries, case and master caddies will be free from defects in materials and workmanship for 1 year from the date of purchase regardless of registration. This warranty is exclusively for the benefit of the original purchaser and is not assignable or transferable. If during the warranty period, the product is shown to be defective ATOMOS may at its option:
• replace the goods or supply equivalent ones, b) repair the goods, c) pay the cost of replacing the goods or acquiring equivalent ones and d) pay the cost of having the goods repaired; The customer must notify ATOMOS of any defect in the goods in writing before the expiry of the warranty periods set out above. The customer will be solely responsible for returning the goods to ATOMOS or its authorized distributor. Upon acceptance of a warranty claim by ATOMOS, where ATOMOS repairs or replaces the goods, it will be responsible for reasonable shipping costs incurred in sending the goods to the Customer, provided that the customer is located in a country in which ATOMOS has an authorized distributor or repair centre or agent.

Warranty Exclusions
This warranty applies only to defects in workmanship and does not cover defects caused by:

• A failure to comply with the then-current operating instructions issued by ATOMOS;
• Neglect;
• Improper or negligent acts or omissions;
• Unauthorized repairs or attempted repairs;
• Tampering with or modification of the goods;
• Connection to incompatible equipment or power sources;
• Exposure to water or weather;
• Exposure to magnetic fields or corrosive liquids or substances;

EXCEPT AS STATED IN THIS WARRANTY, ATOMOS, IT’S VENDORS, AGENTS, RESELLERS AND DISTRIBUTORS DISCLAIM IN THEIR ENTIRETY ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES OUTLINED IN THIS WARRANTY ARE THE EXCLUSIVE REMEDY A CUSTOMER HAS ARISING FROM DEFECTIVE GOODS THAT ARE SUBJECT TO THE WARRANTY. ATOMOS DOES NOT WARRANT THAT THE GOODS WILL OPERATE IN A MANNER THAT IS ERROR-FREE, OR UNINTERRUPTED. THE GOODS ARE NOT INTENDED TO BE THE PRIMARY OR ONLY DATA STORAGE DEVICE FOR DATA – CUSTOMERS ARE SOLELY RESPONSIBLE FOR BACKUP AND PROTECTION OF DATA.

Software License Agreement
IMPORTANT, PLEASE READ CAREFULLY. THIS IS A LICENSE AGREEMENT. This ATOMOS software, related documentation, any included sample images and other files (the “Software”), is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The Software is licensed, not sold. This End User License Agreement (“EULA”) is a legal agreement between you (either an individual or a single entity) and ATOMOS concerning the copyrighted Software provided with this EULA. Use of the Software provided to you by ATOMOS in whatever form or media will constitute your acceptance of these terms unless separate terms are provided by the software supplier, in which case certain additional or different terms may apply. If you do not agree with the terms of this EULA, do not download, install copy or use the Software. By installing, copying or otherwise using the Software, you agree to be bound to the terms of this EULA. If you do not agree to the terms of this EULA, ATOMOS is unwilling to license the Software to you.

1. Eligible licensees. This Software is available for license solely to purchasers of the ATOMOS Ninja V, who have purchased a unit manufactured by ATOMOS Ninja V and purchased through an ATOMOS authorized reseller, with no right of duplication or further distribution, licensing or sub-licensing.
2. License Grant. ATOMOS grants you a personal, non-transferable and non-exclusive right to use the copy of the Software provided with this EULA. You agree you will not copy the Software except as necessary to use it with the ATOMOS Ninja V. You agree that you may not copy the written materials accompanying the Software. Modifying, reverse engineering, translating, renting, copying, transferring or assigning all or part of the Software or any rights granted hereunder, to any other persons or reverse engineering the hardware on which the Software runs, is strictly prohibited. The software is license, not sold. You acknowledge that no title to intellectual property in the Software is transferable to you. You further acknowledge that title and full ownership rights to the Software will remain the exclusive property of ATOMOS and/ or its suppliers, and you will not acquire any rights to the Software, except as expressly set forth above. All copies of the software will contain the same proprietary notices as contained in or on the Software. All title and copyrights in and to the Software (including but not limited to any images, animations, video, audio, text incorporated), the accompanying printed materials, and any copies of the Software are owned by ATOMOS or its suppliers.
3. Reverse engineering. You agree that you will not attempt, and if you are a corporation, you will use your best efforts to prevent your employees and contractors from attempting to reverse compile, derive circuits, modify, translate or disassemble the Software and/or the ATOMOS Ninja V in whole or in part. Any failure to comply with the above or any other terms and conditions contained herein will result in the automatic termination of this license and the reversion of the rights granted hereunder by ATOMOS.

ATOMOS reserves the right to terminate this license without prejudice to any additional recourse ATOMOS may have against you if you violate any of its terms and conditions.

Atomos have a range of accessories tailored to usage with the Ninja V. Visit shop.atomos.com or your nearest Atomos reseller to discover the range of available accessories that will get you up and running enhance your production workflow.

Batteries and power

• ATOMOS 5200mAh 4 Cell NPF Style Battery NP-770
• ATOMOS 7800mAh 6 Cell NPF Style Battery NP-970
• ATOMOS Fast Battery Charger with Multi plug PSU
• ATOMOS Power Kit for all Atomos 5” & 7” Monitor Recorders Media: Master Caddy II
• ANGELBIRD Master Caddy II 4K RAW SSD
• G-TECHNOLOGY MasterCaddy II 4K SSD
• ATOMOS Master Caddy II HDD/SSD Caddies x 5 Media: SSDmini
• AtomX SSDmini by ANGELBIRD (256GB, 500GB, 1TB)
• AtomX SSDmini by SONY (500GB, 1TB, 2TB)

Docking stations

• ATOMOS USB 2.0 & 3.0 Docking Station for Atomos Master Caddy
• ANGELBIRD USB-C to SATA Media Reader
• G-TECHNOLOGY ev Series Reader Atomos Master Caddy Edition (only compatible with SSDmini when using AtomX SSDmini Adaptor handle) Cables:
• ATOMOS AtomFLEX HDMI 4K60p Full to Full (30cm/40cm/50cm)
• ATOMOS AtomFLEX HDMI 4K60p Full to Micro (30cm/40cm/50cm)
• HDMI Coiled cable 4Kp30 Full to Full (30cm/50cm)
• HDMI Coiled cable 4Kp30 Full to Micro (30cm/50cm)

For more detailed instructions and important up-to-date information regarding Ninja V please download the complete Ninja V User Manual from: www.atomos.com/support

Visit Atomos online for full technical specifications, tutorials, camera compatibility, recommended SSDs and more.

• atomos.com
• Atomos 2018. TM ® All trademarks and registered trademarks are the property of their respective owners.

References

• Home | Atomos
• Home | Atomos
• Compatible Drives | Atomos
• Support | Atomos
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>