MERKURY MIEW011999W Smart Wi-Fi LED Strip

• Open the Alexa app and go to Skills in the menu.
  

• Search for Geeni then tap Enable.
  
  

• Authorize your account with Smart Home Skills using the username and password from your Geeni app.
  

• Choose “Discover Devices.” After a few seconds your MERKURY devices will be displayed under Smart Home in the Alexa app.
  

• You can rename your devices in the Geeni app. and Alexa will refer to them by the same name.
  So if you rename a smart bulb to ·uving RoomN or a nickname like

  Blossom,# then Alexa will use that same name later on.

  Alternatively, you can create an Alexa group. like “Bedroom” or “Downstairs,” and add the device to the group.
  Alexa will recognize the group name in the Alexa app, or the device name in the Geeni opp.
  More information is available at: http://tinyurl.com/alexa-smart-home- groups

• Choose “Geeni” from the list of Home Control partners.
  

• Authorize your account with Google Assistant using the username and password from your Geeni app.
  Now your Google Home app and MERKURY devices are linked I
  You’re now able to say # Hey Google# and control your MERKURY devices.

• At any time, go into the #Home Control# section of the Google Home app to set nicknames and rooms for your devices. You can rename your devices in the Geeni opp, and Google Assistant will refer to them by the same name.

So if you rename a smart bulb to #Living Room# or a nickname like “Blossom,” then Google Assistant will use that same name later on. You can always give it a nickname using the Google Home app as well. You can also assign bulbs to a specific room, like “Bedroom” or .. Kitchen.
Google Assistant will be able to control devices by room.

Important Information:
Before installing or replacing a bulb, read and follow all precautions, including the following: CAUTION: RISK OF ELECTRIC SHOCK OR BURNS – USE IN A DRY LOCATION ONLY. The weather resistant IP44 rating only protects the LED strip from splashes in any direction. DO NOT IMMERSE IN WATER.
WARNING: The LED strip must be unplugged when making any modifications to the device. Electrical currents are dangerous and may cause electrical shock, injury, or death (in some cases)

Support:
If you encounter any issues, please contact us at support.mygeeni.com for help. To explore our full selection of products. visit us at: www.mygeeni.com
888-232-3143 Toll-free
© 2021 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006.
The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple and the Apple logo ore trademarks of Apple Inc .. registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google, Google Ploy, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their respective
Made in China

What’s Inside the Box

• Smart Wi-Fi LED Strip
  

• Wi-Fi Controller
  

• Anchor Mounts
  

• Know your Wi-Fi Network and Password
  

• Make sure you’re connecting to a 2.4GHz Wi-Fi network (Geeni can’t connect to 5GHz networks)
  
  

• Power Adapter
  

• User Manual and Review Card
  

• Make sure your mobile device is running iOS 9 or higher or Android 5.0 or higher.
  

Download and Register

• Download the Geeni App from App Store or Google Play.
  

• Register an account on your Geeni App.

  1. Enter your mobile phone number or email address
     

  2. Enter the verification code and create a password.
     

  3. Log in to the App.
     

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>