MERKURY XV-658 Swing N Sound Lifestyle Speaker Instructions
- May 15, 2024
- Merkury
Table of Contents
Consumer Electronics Tech Products
Product Specifications & Instruction Sheet
Please provide the following product information and send it to your sourcing
contact in the New York office.
Form will not be accepted unless filled out completely.
Merkury Model Number (if series, please list all model #): XV-658
Full Product Description (from PO): SWING N SOUND LIFESTYLE SPEAKER
Factory Name: XINVO INDUSTRIAL COMPANY LIMITED
List What’s Included in the Package:
1 x Bluetooth speaker
1 x Charging cable
1 x Carabiner
1 x Instruction manual
How is the product powered?
Power Feature
| Yes/No|
If YES, please list specs below
---|---|---
USB Powered| YES| Type-C charging cable 50cmL
Dry Cell Batteries| | Lithium battery –18650-1200mAh
Solar Powered| NO|
AC Powered| NO|
Other| |
Product Specifications
Feature
| Product Spec|
Comments
---|---|---
Product Dimensions in Inches (Height
x Width x Depth) :
| 180 x 38 x80mm|
Product Weight in Pounds:| 0.8lbs|
Input Voltage Rating:| 5V|
Output Voltage Rating:| 3.7V|
Output Watts:| 5W*2|
Indoor/Outdoor Use:| Indoor & Outdoor| IPX6
Setup Details| |
---|---|---
Requires Physical Installation?| No|
Reset Method| No|
Indicator| LED Indicator light|
Supports BLE Pairing?| No|
Supports Easy Mode Pairing?| Yes|
---|---|---
Supports AP Mode Pairing?| No|
Other| |
Technical Specifications| Standard| Product
Specification
Stereo Sound| Stereo|
BT IC Model and Version| AC6969 /V5.3|
BT TWS Output Sound| 10W|
BT Headset Output Sound| No|
BT Speaker Output Sound| 10W|
Frequency Response| 30HZ~18KHZ|
Distortion, Use iPhone max volume for testing| @ vol max.
BT SPK ≦ 10%|
SNR, Use iPhone max volume for testing| No|
Charging Current| Around 600mA|
Battery Capacity| 1200mAh|
Bluetooth® Range| ≥10m|
BQB certification for BT IC| AC6969|
Battery With PCM| YES|
Play Time| Around 3H|
IPX Rating| IPX6|
Charging Time| Around 3H|
Charging Port Type| Type-C|
Battery Capacity: Talk Time| Around 3H|
Battery Capacity: Standby Time| 300 days+|
Number of Channels| 2|
Watts Per Channel| 5W|
Driver Size| 40mm|
Speaker Size| 2|
Nominal Impedance (Ohms)| 3Ω|
Sweat Proof – Headphones/Earbuds| No|
Microphone/Speakerphone Function?| No|
3.5mm Aux input Function?| YES|
FM Function?| YES|
TF Card Playback Function?| NO|
USB Playback Function?| NO|
Included Accessories| Charging cable, Carabiner|
Certifications| FCC ID: 2ARZK-XV658|
Certifications: (ETL, UL, California Proposition 65, FCC, BQB, CEC/BC,
etc.)
Note : ETL/UL Certifications for adapter should not be printed on the
packaging
FCC ID: 2ARZK-XV658
Features: List at least 3-5 features and describe the function of each
feature.
- IPX6 Waterproof speaker, perfect for home party, golf sport, outdoor hiking, cycling, and walking
- Dual Pairing function supports 2 speakers’ connection to provide stereo sound.
- Portable and long battery life
- Loud Sound and Good Bass: The golf speaker features deep bass and you can pair with two speakers to get Stereo experience.
- Magnetic Bluetooth Speaker& Easy to Use: The golf cart Bluetooth speaker with built-in super strong magnets which is convenient with mount, it can instantly stick to any magnetic surface, attaches securely to golf cart even through cart cover. The attached carabiner is a plus for easy and secure attachment to your golf club bag and golf stand bag.
Product Diagram/Line Drawings: Include all buttons/controls and accessories, if applicable. Zoom in view of reset button or indicator if applicable.
- ON/OFF/Mode
- Previous track
- Next track
- Volume down
- Volume up
- Hands-free call/Play/Pause
- Indicator light
- Aux-in Port
- Type-C Charging
Step-by-Step Installation or Assembly Instructions: If applicable
NO
Instruction Guide for Product Use: Include instructions for all special
features.
LED Indicator Guide
- Charging: Red LED on
- Fully Charged: Red LED off
- Pairing Mode: Blue LED will flash quickly
- Connected: Blue LED on
- Playing: Blue LED will flash slowly
Pairing the Device/Basic Operations
Press the ON/OFF button for 2-3 seconds or until you hear “di di di”
-
On your device’s wireless connection menu, find and select “MERKURY BT124″
The blue LED will flash slowly when the pairing is complete, and you will hear” di di di” -
The blue LED will stay on while the speaker is on
-
When the battery is low. the speaker will beep every 20 seconds.
To turn the speaker off, press and hold the ON/OFF button for 2-3 seconds. You will hear “di di di”.
TWS Mode
(TWS functions is for to pair 2 pieces speakers)
Double press ON/OFF button on the speaker then will hear “ deng ” sound, TWS
paired. Turn on the wireless feature on your mobile device, find and pair with
MERKURY BT124 to play music.
FM Mode
Short press ON/OFF button into FM Radio Mode, then insert Type-C charging
cable (included) into the charging port as the FM antenna, long press
button into automatically searches for and save stations. After receiving
stations, short press < or > button to fix the station.
Hands-free Call
When paired to a wireless device, you can take phone calls using the button on
the speaker and take through the built-in microphone. Press the button to
answer an incoming call, press the button again to end the call, double press
to re-dial the las call automatically.
Charging the speaker
- Plug the charging cable into the charging port of the speaker. Plug the USB into a compatible power source
- The red LED will turn on and indicate if the speaker is charging.
- Once the speaker is fully charged, the red LED will turn off. When the device indicates the battery is low, approx.4-5 hours of charging time is needed to fully recharge the battery.
Legal Warnings: Any information that needs to be displayed; please
include specific guidelines such as font size or color.
Periodically wipe clean with soft cloth. Nover uses abrasive cleaning agent.
FCC Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important Information:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
| Important Information | N/A |
|---|---|
| Other Warnings | N/A |