MERKURY EBS5 Soundchager Bluetooth Speaker and Clock with Wireless Charger User Manual
- May 15, 2024
- Merkury
Table of Contents
**MERKURY EBS5 Soundchager Bluetooth Speaker and Clock with Wireless Charger User Manual
**
INSTALLTION INSTRUCTION
Power Connection:
- Plug the alarm clock in using the included USB-C cable to a USB power source.
Note: To use the wireless charging and USB charging features at the same time the power source must be Quick Charge 3.0 enabled.
Wireless Charging:
- You can charge your smartphone with a protective case on it. (Works with most cases up to 4 mm thick.)
- If your protective case has metallic studs, magnetic clasps, or a magnetic plate, you must remove the case before placing your phone on the pad.
- Also ensure the protective case does not create distance between the charging pad and the back of the phone that is greater that 4 mm.
Charging:
- Your smartphone will automatically begin to charge when placed on the Wireless Charger.
- For optimum charging, place your mobile phone in the center of the Wireless Charger.
- When it’s charged, the red light will be on. When fully charged, the light will be off.
LED Status Indicator:
- No Light: Standby.
- Breathing Light: Device is charging properly.
- Flashing Light: Foreign object detected. Charging is disabled.
Fast Charging:
- The wireless charger supports outputs of up to 15W (Fast Charging).
- To enable fast charging for your compatible device the wireless charger must be powered by a USB charger with Quick Charge 3.0 Technology (5V/3A, 9V/2A, 12V/1.5A).
Alarm Clock Function:
- The default setting of the product is 12H clock and Fahrenheit Temperature.
- When the alarm rings, the indicator light of the alarm clock will flash, press any key to turn off the alarm, and the indicator light of the alarm clock will be on after the alarm is tumed off.
Nightlight Setting:
- Click the light button on backside of product to turn on the nightlight.
- Click the button again to cycle through the brightness settings.
DETAILED INSTRUCTIONS AND DIAGRAMS
Bluetooth Mode
- Power Button: Press and hold for 2 seconds to power on/off to enter “Bluetooth” mode” search the pairing name: MERKURY WCR01 and connect it to the phone.
- Mode button: No function
- Alarm button: No function
- Button: Press once: To lower volume/Press and hold. To return to previous track
- Button: Press once. To raise volume/Press and Hold: To advance to next track If you don’t hear any audio, press to increase the volume
- Light button: No function
Clock Mode
- Power Button: Press and hold for 2 seconds to power on, then press once to enter “Clock mode”,
- Mode button: Press once to enter setup sequence time: 12H/24H (hour minute alarm clock (hour minute)-Year-monthäday-cycle. The two points in the middle second and the relevant setting numbers flash at the same time. Press A/V buttons to increase or decrease the hour value. In 12H settings, an LED indicator in the upper left corner, indicates pm. If there is no button pressed within 10 seconds, you will automatically exit settings mode and the current settings will be saved.
- Alarm button : Press and hold to tum on/off alarm and the alarm indicator icon will tum on or off,
- Button: When setting the time and alarm, press to decrease the number.
- Button: When seting the time and alarm press to increase the number, When in clock mode, press and hold to switch the temperature display (Celsius and Fahrenheit), Press to switch the time display format (12H/24H),
- Light button: Press to toggle the night light brightness settings from high, medium, low, and off.
Technical Support:
Please do not attempt to fix the product by yourself. If you are experiencing
problems with the product, please do not return it to the store you bought it
from. can contact our technical support representatives and they will assist
you with questions you might have.
For assistance operating your product, please consult the User’s Manual first,
then f free to contact Merkury Innovations technical support:
Merkury Innovations
45 Broadway, 3rd Fl; any
New York, New York 10006: You
www.merkuryinnovations.com: any
E-mail :
[email protected]: eel
Technical Specifications:
Input: 5V/3A, 9V/2A
Wireless Output: 5W, 7.5W, 10W, 15W
©2023 Merkury Innovations, LLC.
To explore our full selection of products, visit us at:
www.merkuryinnovations.com iPhone is a trademark of Apple Inc., registered in
the U.S. and other countries. The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. All other trademarks and trade names
are those of their respective owners. Made in China.
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The device has been evaluated to meet general RF exposure requirement.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may
cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for
compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with minimum
distance of
20 cm between the radiator and your body. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.