Merkury Innovations MoonStruck Bluetooth Speaker User Manual
- June 5, 2024
- Merkury Innovations
Table of Contents
Innovations MoonStruck Bluetooth Speaker
User Manual
* IMPORTANT Please read before using this product
VOO\STRUC BLULIOOTH SPEAKER
User Manual for MI-S096B-199
Included: Moonstruck Bluetooth Speaker, USB Power Cable, Remote Control
If you have any questions or problems email:
[email protected]
USING YOUR MoonStruck
- Press the Power Button located at the bottom of the MoonStruck Speaker to turn the product on.
- Remove the battery protection tab from the back of the remote.
- Use the remote control to change brightness, LED colors, and flashing modes.
– Press and hold the LED button on the product for light flashing mode in the selected color, press again for light-reactive with music mode, and press again to turn off the flashing function.
– Press the LED button to adjust brightness from high to middle to low, then off.
– Press and hold the yellow color button for light flashing mode with automatic color change.
– Press and hold the white color button for pulsing color change every 3 seconds.
– Use the color buttons on the remote to select any desired color.
PRODUCT BOTTOM
ASSEMBLING YOUR MOONSTRUCK SPEAKER STAND
-
Assemble the wooden frame by inserting each dowel into its corresponding slot. Refer to image.
-
The MoonStruck Speaker can be powered by connecting to a USB power source using the included USB power cable or via the included rechargeable lithium battery.
PAIR & CONNECT WITH A NEW DEVICE
- Make sure the speaker is turned off and your device’s Bluetooth setting is activated.
- Turn the speaker on; after a few seconds it will automatically enter into pairing mode and the LED will flash.
- On your Bluetooth-enabled device, navigate to the Bluetooth settings menu, turn on the Bluetooth feature and search for new devices. Wait a few seconds and select “MI-S096B”. The speaker will emit a tone when successfully paired.
NOTE: Moonstruck Bluetooth Speaker will always auto-pair with your device as long as it is in range and your device’s Bluetooth is enabled.
WIRELESS TWS FEATURE:
- Power on both speakers.
- Hold the power button on the bottom of the Bluetooth-connected speaker until a beep indicates connection.
- The connected speaker will pair automatically with the second MoonStruck speaker when using the TWS feature of these speakers.
- Blue light indicates Bluetooth connection and a red light indicates charging mode.
CHARGING INFORMATION:
- The unit features a built-in charge protection circuit. It can be charged by connecting to a computer or power source. A full charge takes approximately 4 hours.
- Battery life and each charge time depend on volume and usage.
FEATURES
Bluetooth function Memory function and playback Built-in lithium battery High- quality sound
IN THE BOX:
MoonStruck Bluetooth Speaker Manual USB Power Cable
SPECIFICATIONS:
- Bluetooth Standard: 5.0
- Transmission distance: 10 meters
- Output power: 5w
- Frequency effect: 70Hz-18KHz
- Input Power: Direct-current DC5V500-1500mA
- Maximum current consumption:400mA
TROUBLESHOOTING
No power
First, recharge your speaker using the included charging cable. Then, try
using a different micro USB cable.
Music is not playing over Bluetooth
Make sure your Bluetooth device has an A2DP profile. Check if both devices
are paired and connected over Bluetooth. Restart the speaker to reconnect your
Bluetooth device.
The Bluetooth device will not reconnect with the speaker
Navigate to your Bluetooth settings menu on your Bluetooth device, tap “MI-
S096B,” and select “Forget.” Now follow the steps to pair your device again.
TECHNICAL SUPPORT:
Please do not attempt to fix the product by yourself. If you are experiencing
any problems with the product please do not return it to the store you bought
it from. You can contact our technical support representatives and they will
assist you with any questions you might have.
For assistance operating your product please consult the User’s Manual first
then feel free to contact Merkury Innovations technical support:
Merkury Innovations 45 Broadway, 3rd Floor New York,
New York 10006 www.merkuryinnovations.com
E-mail:
[email protected]
© 2022 Merkury Innovations LLC
To explore our full selection of products, visit us at:
www.merkuryinnovations.com The
illustrated product and specifications may differ slightly from those
supplied. All other trademarks and trade names are those of their respective
owners. Made in China
MERCURY INNOVATIONS
FILE INFORMATION DATE:
03/10/22 MODEL NUMBER: MI-S096B-199 (MANUAL)
PRINTER SPECIFICATIONS FILE NAME:
MI-S096B-199_Manual_REV_031022.ai SCALE: 100%
SIZE: Trim: Manual:W 400mm x H 140mm
PAPER STOCK: 80g Art Paper
Finish: Matt Lamination INKS: 1/1
Greyscale PRESS WORK / NOTES: Trim to size, score, fold, & glue in specified
areas. Trim Score DO NOT print Comments or Dielines. The physical sample
according to specs must be approved by MERCURY before proceeding to
production.
CONTACT MERCURY CHINA:
Perry
[email protected]
COMMENTS
(Internal reference only) Ale created by Kim
– Please include in all packaging for MI-S096B-199
– Greyscale
– Matt Lamination
– Single-sided printing
– Fold NEATLY
– Revised front page
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.