MERKURY INNOVATION KTWS-19 Wireless Earbuds User Manual

MERKURY INNOVATION KTWS-19 Wireless Earbuds

PAIR & CONNECT WITH A NEW DEVICE

• The ALLOY will turn on automatically once it is removed from charging case.
• On your smartphone open the Bluetooth menu, power on your Bluetooth” setting and search for new devices.
• When you see UB EO39T listed, tap it to connect.
• Once connected with your device, there will be a BEEP

CHARGING

EARBUDS

• Checking the “R” and “L” indicators on the charging case, place the right and left earbuds
• into the corresponding slots so that the magnetic metal charging contacts line-up correctly.

CASE

• The center LED light will glow solid red when charging.
• When removed from charging cable the case’s 3 indicator lights wll glow solid blue. After approximately 5 minutes the LED indicators will turn off.

Note: the case can charge the earbuds while charging itself.

PLAY & CALLS

• Connect your device to these earbuds via Bluetooth (see “Pair & Connect with a New Device.”)
• Open your favorite music app and press play.
• All audio, including music, games, videos, calls, and notifications will be routed through the earbuds.

RECONNECT TO YOUR DEVICE

• You only need to pair your Bluetooth° device with these earbuds once.
• With your device’s Bluetooth” feature turned on and in range, remove earphones from charging case. They will automatically connect to each other and to your smartphone.
• If you have a previously paired device that does not auto-reconnect, navigate to the Bluetooth settings menu on your device and select “UB E039T” from the list of paired Bluetooth devices.

POWER ON/OFF

• Earbuds activate pairing mode instantly when taken out of the box. Afternatively you can manually press and hold the power buttons for 2-3 seconds.
• To power off, simply place the earbuds back into the charging case and they will automatically power off. Afternatively you can manualy press and hold the power buttons for 8 seconds.

TRUE WIRELESS EARBUDS

1. Microphone (On both Earbuds)
2. Power On/Off . Play/Pause Answer/End Call/ Reject Call Previous Track/Next Track Increase Volume/Decrease Volume
3. Charging Connectors

CHARGING CASE

1. LED Charging Case Indicators
2. Charging Port

QUICK PAIRING GUIDE FOR NEW DEVICES

IMPORTANT: Please follow these directions in the proper order to ensure the earbuds pair and connect properly.

1. The ALLOY will turn on automatically once it is removed from charging case.
2. On your smartphone open the Bluetooth menu, power on your Bluetooth setting and search for new devices.
3. When you see UB E039T listed, tap it to connect.
4. Once connected with your device, there will be a BEEP

Note: If your device asks for a passcode to connect, enter “O000”.

Specification

• Bluetooth Version: 5.0
• Bluetooth® Range: Up to 30ft.
• Charging Voltage: 5V
• Freq. Response: 20Hz 20KHz
• Charging Time: Approx. 1 Hour
• Playback Time: Approx. 3 Hours
• Standby Time: Approx. 100 Hours
• Depends on individual use.

Charging Case

• Charging Input: Micro USB
• Battery Capacity: 300mAh
• Charging Time: ApprOx. 1 Hour

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate thee equipment.

Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>