BDE-RFM208-IN Multi-Band Wireless Module User Guide

June 6, 2024
BDE

BDE-RFM208-IN Multi-Band Wireless Module

Introduction

This user guide is for BDE-RFM208-IN, a Wireless Module based on TI CC1352R. It is a quick start guide for how to connect the module with the evaluation board BDE-EVB07 or with the TI launchpad, and how to build the first application. It also shows a demo for how BDE-RFM208-IN receives a data packet that is sent from another BDE-RFM208-IN.

Get Ready
The following tools are recommended to develop with BDE-RFM208-IN.
Hardware tools:

  • Two modules of BDE-RFM208-IN (BDE-RFM208-IN-BDE Technology Inc. (bdecomm.com))

  • Two BDE-ADP208 V1.0 (adaptor board)

  • PC or Laptop

  • Two BDE-EVB07 ( BDE-EVB07-BDE Technology Inc. (bdecomm.com))
    or

  • Two TI Launchpad (LAUNCHXL-CC13X2R1 Evaluation board | TI.com)

  • USB cable for power supply and debugging

Software tools:

  • Terminal software such as CCS, IAR.
  • CCS download
  • Software Development Kit (SDK)

Build Your First Application

Once have the Hardware and Software tools in place, please following the following steps:
Connect the Hardware
If chose EVB07: Use USB cable to connect EVB07 and PC or laptop. Plug BDE- RFM208-IN with the adaptor board into the dev board and connect all the pins with Jumpers as the following picture shows.

Multi-Band Wireless Module

If chose TI Launchpad: The connection is as follows.

Optional : TDO TDI RXD TXD

Build the Application

  • Download and install the CCS and SDK
    From the above links, follow the instructions in the following steps to download and install the CCS and SDK.

  • ◼ CCS Installation

1.  Click on this option
2. Select an option to download CCS
3. Unzip the package to a local disc
4. Click the setup of CCS
5. Click “Next”
6. Select the default option
7. Click “Next”
8. Select the Installation Directory
9. Select the default option
10. Select the component
11. Select the default option
12. Click “Next”
13. Click “Next”
14. Waiting for installation to complete

Software Development Kit (SDK) installation

  1. Click on this option
  2. Select an option you need to download SDK
  3. Log in to your TI account, if you are a new user, register a TI account first
  4. Select “civil” if your application is for civil use
  5. Select “Yes” and submit
  6. Download SDK
  7. Installation
  8. Click “Next”
  9. Select the default option
  10. Select the Installation directory
  11. Click “Next”
  12. Waiting for installation to complete

Run an example/demo code

  1. For the first module, find the option named “Import CCS project…”
  2. According to the following path to find the sending end project: ti\simplelink_cc13x2_26x2_sdk_5_10_00_48\examples\rtos\CC1352R1_LAUNCHXL\ easylink\ rfEasyLinkRx\tirtos\ccs
  3. Right Click the project to build the receiving end project
  4. Click this bug icon (means download and debugging)
  5. C lick on this option to start debugging
  6. Find the file which is named “rfEasyLinkRx.c” and the function which is named “rxDoneCb”, and set a breakpoint at the line as the arrows shows
  7. For another module, according to the following path to find the sending end project: ti\simplelink_cc13x2_26x2_sdk_5_10_00_48\examples\rtos\ CC1352R1_LAUNCHXL \ easylink\ rfEasyLinkTx\tirtos\ccs
  8. Right Click the project to build the sending end project
  9. Click this bug icon (means download and debugging)
  10. Click this bug icon (means download and debugging)
  11. You can see the lights flashing (means sending a data uninterruptedly)
  12. The program stops at the breakpoint

By far you should’ve built your first application successfully.
For further development, please check out the CC1352R1 datasheet, product information, and support | TI.com page and download the User Guide (https://www.ti.com/lit/pdf/swcu185)

Other Resources

  • Mac OS Installer for SimpleLink CC13X2 26X2 SDK
  • Linux Installer for SimpleLink CC13X2 26X2 SDK
  • Mac OS Installer for Code Composer Studio IDE
  • Linux Installer for Code Composer Studio IDE
  • CC1352R SimpleLink™ High-Performance Multi-Band Wireless MCU
  • Windows Installer for SmartRF Flash Programmer 2

Revision History

Revision Date Description
V1.0 15-Feb-2020 Initial Released
V2.0 14-Apr-2021 Changed template

More Questions:
Please search existing answers on TI E2E support forums
Contact your local TI sales representative.
Or
Contact BDE Technology, Inc.

China:
B2-403, 162 Science Ave, Huangpu District, Guangzhou, 510663
Tel: +86-020-28065335
Website: http://www.bdecomm.com/cn/ Email: shu@bdecomm.com

USA:
67 E Madison St, #1603A, Chicago, IL 60603
Tel: +1-312-379-9589
Website : http://www.bdecomm.com/ Email: info@bdecomm.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals