SIGMA 353201102 65mm DG DN Lens Instructions
- June 13, 2024
- SIGMA
Table of Contents
65 mm F2 DG DN
C Contemporary
020
INSTRUCTIONS
353201102 65mm DG DN Lens
SIGMA CORPORATION
2-4-16 Kurigi, Asao-ku, Kawasaki-shi, Kanagawa 215-8530 Japan
PHONE : 044-989-7430 FAX : 044-989-7451
Thank you very much for purchasing a Sigma Lens. In order to get the maximum performance and enjoyment out of your Sigma lens, please read this instruction booklet thoroughly before you start to use the lens.
WARNING!! : SAFETY PRECAUTIONS
- Do not look directly at the sun, through the lens. Doing so can cause damage to the eye or loss of eyesight.
- Do not leave the lens in direct sunlight without the lens cap attached, whether the lens is attached to the camera or not.
- This will prevent the lens from concentrating the sun’s rays, which may cause a fire. The shape of the mount is very complex. Please be careful when handling it so as not to cause injury.
DESCRIPTION OF THE PARTS (fig.1)
1. Filter Attachment Thread
2. Focus Ring
3. Iris Ring
4. Focus Mode Switch| 5. Mount
6. Lens Hood
7. Plastic Front Cap
8. Metal Front Cap
---|---
ATTACHING TO THE CAMERA BODY
Please refer to the camera’s instruction manual for details on how to attach
it to or detach it from the camera body. On the lens mount surface, there are
electrical contacts.
Please be careful with their handling as scratches or dirt on them could cause
malfunctions or damage.
FOCUSING
For autofocus operation, set the focus mode switch on the lens to the “AF” position (fig.2). If you wish to focus manually, set the focus mode switch on the lens to the “MF” position (fig.3). You can adjust the focus by turning the focus ring.
- Please refer to camera’s instruction manual for details on changing the camera’s focusing mode.
IRIS RING
It incorporates an iris ring that is useful to adjust the aperture value during Aperture Priority Auto mode and Manual Exposure mode.
- With some cameras, the iris ring does not work.
- Check the camera’s instruction manual for how to adjust exposure.
FRONT CAP
In addition to the standard plastic front cap, a metal front cap is available for better integration.
-
This metal front cap is attached to the lens using a magnet.
Please do not put credit cards (magnetic cards) or any other objects close to the magnet on the metal front cap as it could corrupt any data held on the object. -
The metal front cap cannot be used with a filter. When using filters, please use the supplied plastic front cap.
LENS HOOD
A bayonet type detachable hood is provided with the lens. This lens hood helps to prevent flare and ghosted images caused by bright illumination from outside the picture area. Attach the hood and turn clockwise until it stops rotation (fig.4).
- In order to place the lens and hood into the storage case, you must first remove the hood, then replace it on the lens in the reverse position (fig.5).
BASIC CARE AND STORAGE
- Avoid any shocks or exposure to extreme high or low temperatures or to humidity.
- For extended storage, choose a cool and dry place, preferably with good ventilation. To avoid damage to the lens coating, keep away from mothballs or naphthalene gas.
- Do not use thinner, benzine or other organic cleaning agents to remove dirt or finger prints from the lens elements. Clean by using a soft, moistened lens cloth or lens tissue.
- This lens is not waterproof. When you use the lens in the rain or near water, keep it from getting wet. It is often impractical to repair the internal mechanism, lens elements and electric components damaged by water.
- Sudden temperature changes may cause condensation or fog to appear on the surface of the lens. When entering a warm room from the cold outdoors, it is advisable to keep the lens in the case until the temperature of the lens approaches room temperature.
TECHNICAL SPECIFICATIONS
| Lens construction | 9 – 12 |
|---|---|
| Angle of View | 36.8° |
| Minimum Aperture | 22 |
Minimum Focusing
Distance| 55cm (1.8ft)
Magnification| 1:6.8
Filter Size| 62mm
Dimensions
Dia. x Length| 72 x 74.7mm
(2.84 x 2.94 in)
Weight| 405g (14.3oz)
- Dimensions and weight include the L-Mount.
- The glass materials used in the lens do not contain environmentally hazardous lead and arsenic.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Disposal of Electric and Electronic Equipment in Private Households Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol indicates that this product shall not be treated as household waste. Instead it shall be collected separately for the recycling of electrical and electronic equipment. If the new products are purchased, this product might be handed over to the distributor or the collection system of waste electrical and electronic equipment eventually. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product or components of this product. If this product is disposed illegally, it might cause a possibility of penalties. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
This Product uses the Source Code of μT-Kernel under μT-License granted by the TRON Forum (www.tron.org).
**** The CE Mark is a Directive conformity mark of the European Community (EC).
SIGMA (Deutschland) GmbH
Carl Zeiss Str. 10/2, D 63322 Rodermark, F.R.GERMANY
Sales: 06074 / 865 160 Service: 06074 / 865 16 65 Support: 06074 / 865 16 88
E-Mail: info@sigma-foto.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>