BLAUPUNKT DC-S4 Multitronic Smart Home Senors Instruction Manual

BLAUPUNKT DC-S4 Multitronic Smart Home Senors

Follow instruction in this document to setup and use the accessory. For further setting and operation detail, please visit Blaupunkt website service .blaupunkt-security.com to download the complete manual.

Door / Window Detector

1. LED Indicator / Learn Button
2. Knockouts
3. Battery Insulator
4. Rib Mark
5. Magnet
6. Tamper

Registration

1. Pull out the battery insulator to activate the battery.
2. For Q Series: Go to the Web Portal https://eu.bphomeconnect.com/BP/ and login with your account credentials.
3. Put the Hub into learning mode: Go to Settings → Device and click on the “+” Add device button.
4. Press Learn Button (1) to learn-in the DC-S4. When the panel receives the “learn signal”, it will emit a double beep tone and the web interface will display the device info.
5. Check the box in front of the device info, then click OK to add the device into the system.
6. Input the name of the device (e.g. Door Contact Front Door) and select the desired zone.
7. To change the attribute of the accessory click on the 3 dots on the right side of this accessory and select the desired attribute (burglar, Entry, home omit) from the attribute pull down menu.

Note: For SA series refer to panel manual to learn how to register a device.

Installation Location

• Install the main body of the door contact on the door/window frame, and the magnet on the door/window.
• Install it on the highest part from the door / window
• Don’t aim a PIR Movement Detector to this door/window.
• Don’t install on doors or windows with magnetic surface as iron or steel.

Installation

1. For screw installation remove the back cover and push through the 2 knockouts on the back (for example with a screwdriver) where the plastic is thinner.
2. Drill 2 holes into the surface using the knockouts as template.
3. Fix the Door Contact back cover onto the surface with the screws and plugs provided
4. Place the back cover back to the main body and screw it back.
5. Align the magnet with the Rib Mark from the main body, the gap between the main body and the magnet should be no more than 15 mm. Fix the magnet onto the door/ window with the double tape provided.

• Instead of screw installation, you can also use the included double side adhesive tape to install the main body of the door contact.
• Make sure that the tamper protection is pressed down against the door/ window surface, otherwise the accessory will trigger a tamper alert.
• This accessory has not supervision mode.

Battery: 1 x 3V CR2032 lithium battery (Pre-inserted)
Radio frequency: 868 MHz

Precautions

Please read this manual carefully before using it for the first time and keep it for future reference to look up.
The safety precautions contained herein reduce the risk of fire, electric shock and injury, if they are followed correctly.

• Children do not recognize the dangers that can result from improper handling of electrical appliances. Never use children with unsupervised electrical appliances.
• Suffocation! Do not leave packaging material behind. Children can swallow small parts and choke on it.
• Do not use the product if it is damaged.
• Avoid contact of the item with water or other liquids.
• Proper handling of batteries. Remove the batteries from the device when not in use for a long time.
• The enclosed batteries are not suitable for charging.

Technical specifications

Battery brand:

| Standby power consumption:| Max. power consumption:| Radio frequency:| Max. Transmission power:| Duty cycle:
---|---|---|---|---|---
Lithium CR2032 / 3V| 5uA| 15mA| 868.35Mhz| 7dBm|

At 868.3 MHz < 1 % per h

Declaration of conformity

Hereby Security Brand Pro GmbH declares that the radio equipment type “DC-S4” complies with the directive 2014/53 / EU. The full text of the EU Declaration of Conformity is available at the following Internet address: www.blaupunkt.com/service

Dispose

| Old appliances must not be disposed of with normal household waste. In accordance with Directive 2012/19/EU, the device must be disposed of properly at the end of its service life. The recyclable materials contained in the device are recycled and pollution of the environment is avoided. Return the old device free of charge to a collection point for electrical waste or a recycling yard. Used batteries must be collected separately and disposed of in an environmentally sound way (European Directive on Electrical and electronic equipment).
---|---
| Dispose of the packaging materials in an environmentally friendly manner by placing them in the collection containers provided.
| General recycling symbol Further information can be found under: www .mueller-licht.de/recycle/
| Green Dot
Follow the instruction in this document to setup and use the accessory. For further setting and operation details, please visit the Blaupunkt websiteservice.blaupunkt-security.com to download the complete manual.

Blaupunkt Competence Center Security
Security Brand Pro GmbH
Mondstrasse 2-4
85622 Feldkirchen, Germany
E-Mail:contact@blaupunkt-sc.com
www.blaupunkt.com/service

Documents / Resources

| BLAUPUNKT DC-S4 Multitronic Smart Home Senors [pdf] Instruction Manual
DC-S4, DC-S4B, Multitronic Smart Home Senors
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>