Luminans JP-G50SRWB Wi-Fi GU10 LED RGB Bulb Instruction Manual

Luminans JP-G50SRWB Wi-Fi GU10 LED RGB Bulb

Opera ng Instructor Miguel

Wi-Fi GU10 LED RGB Bulb
JP-G50SRWB rev 1
Description
Miguel can be controlled trough an App in your mobile or tablet.
In the App you can setup your device and create scenarios and schedules for your lining.

Usage and Connexon

1. Download and install the app “TuyaSmart” from the Apple App Store or Google Play on your smart device. Scan the QR code below for a direct link to the App.

2. Launch the “TuyaSmart” app.

3. Create a new account or log in to your exisng account.

4. Make sure Bluetooth is turned on in your smart device, as it´s necessary for the connexon.

5. Put in the lamp in a GU10 socket, turn on the power. If the light does not flash: Turn the power off – on – off – on – off – on.

6. When the light flashes, Miguel will appear in the app. If Miguel does not show up, press “+” in the upper right corner.

7. Add Miguel by clicking on ”+”

8. Confirm Wi-Fi network and password.

9. Name the unit, please observe that this will be the same name used when addressing the device from your voice assistants.
   NOTE
   Do not use Miguel together with an external dimmer, Miguel can only be dimmed via App in a mobile or a tablet.
   Only use Miguel in dry environments.

• Now you can configure and share your system with family and friends.
• You can also connect voice assist ants like Amazon Alexa and Google Assistant to control your lining.

Coning Voice Assistants

1. Choose a unit to connect to a Voice Assistant.

2. Press the pencil to see the unit Informa on.

3. Choose which Voice Assistants to connect to.

• To reduce the risk of electric shock this product should only be opened by a authorized person.

• Unplug the power cord from the wall outlet, if any problems arise.

• Read the opera ng instructors carefully before use. Keep the instructors for use for future needs.

• Use the device only for its intended purpose.

• Do not use the device if any part is damaged or incorrect. If the device is damaged or incorrectly, it must be replaced immediately.

• The device is for indoor use only.
  Do not use the device outdoors.

• Do not expose the product to water or moisture.

• Do not touch the device with wet hands.

• Make sure the base of the bulb matches the lamp holder.

Technical Specification

Radio Standard
ETSI EN 300 328 V2.2.2 (2019-07)

EMC Standard
EN 301489-1 V2.1.1 (2017-02),
EN 301489-17 V3.1.1 (2017-02),
EN 55015:2013 +A1:2015,
EN 61547:2009
Safety Standard (LVD)
IEC 60669-2-1:2002/AMD1:2008/AMD2:2015, IEC 60669-1:1998/AMD1:1999/AMD2:2006 EN 60669-2-1:2004 +A1:2009 +A12:2010, EN 60669-1:2018, EN 62311:2008
RoHS Standard
2011/65/EU, (EU) 2015/863
Radio Equipment (RED)
Complies with 2014/53/EU Directive

FAQ

Q1: What do you do if Miguel does not connect to your Wi-Fi?

1. Check that Miguel is properly connected and has power.
2. Make sure Bluetooth is enabled on your mobile / tablet.
3. Make sure that Miguel and mobile / tablet are connected to the same network.
4. Are the devices connected to the internet.
5. Check that the password for your Wi-Fi is entered correctly.
6. Check that any firewall is not blocking traffic.

Q2: What happens if my Wi-Fi connec on is lost?
Miguel must be connected to Wi-Fi to be controlled via the App.

Q3: How to change Wi-Fi network or password for Wi-Fi?
Repeat the pairing process from step 5.

Q4: How do you reset Miguel?
Switch the power to the luminaire on / off 3 mess in quick succession (OFF-ON- OFF-ON-OFF-ON), then wait 1-3 seconds un l Miguel starts flashing.

Product informa on and manufacturer’s declara on are available at: www.luminans.com
JP Interna onal Technologies AB, Runstensvägen 5, S-175 61 Järfälla info@luminans.com | www.luminans.com

References

• Luminans LED lighting without compromise - Luminans

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>