Luminans JP-G95FWB Sigge Wi-Fi G95 LED Bulb Instruction Manual

Operator Instruction
Sigge
Wi-Fi G95 LED Bulb
JP-G95FWB rev 1

Description

Sigge can be controlled through an App in your mobile or tablet.
In the App you can setup your device and create scenarios and schedules for your lighting.

Usage and Connection

1. Download and install the app “TuyaSmart” from the Apple App Store or Google Play on your smart device.
   Scan the QR code below for a direct link to the App.

2. Launch the “TuyaSmart” app.

https://smartapp.tuya.com/tuyasmart

3. Create a new account or log in to your existing one.

4. Make sure Bluetooth is turned on in your smart device, as it´s necessary for the connec

5. Screw in the lamp in an E27 socket, and turn on the power. If the light does not flash: Turn the power on and off, on – off – on – off – on.

6. When the light flashes, Sigge will appear in the app. If Sigge does not show up, press “+” in the upper right corner.

7. Add Sigge by clicking on “+”

8. Confirm Wi-Fi network and password.

9.  Name the unit, please observe that this will be the same name used when addressing the device from your voice assistants.

NOTE
Do not use Sigge together with an external dimmer, Sigge can only be dimmed via App in a mobile or a tablet.Only use Sigge in dry environments.

Use with Voice Assistants

1. Select a device to connect to the voice assistant.
2. Click the pin to see device Information
3. Select the voice assistant (s) you want to connect.
4. Connect the light your voice assistant by logging in to the associated account.

• To reduce the risk of electric shock this product should only be opened by an authorized person.

• Unplug the power cord from the wall outlet, if any problems arise.

• Read the operator carefully before use.
  Keep the instructor use for future needs.

• Use the device only for its intended purpose.

• Do not use the device if any part is damaged or incorrect. If the device is damaged or incorrectly, it must be replaced immediately.

• The device is for indoor use only.
  Do not use the device outdoors.

• Do not expose the product to water or moisture.

• Do not touch the device with wet hands.

• Make sure the base of the bulb matches the lamp holder.

Technical Specifica

Radio Standard
ETSI EN 300 328 V2.2.2 (2019-07)
EMC Standard
EN 301489-1 V2.1.1 (2017-02),
EN 301489-17 V3.1.1 (2017-02),
EN 55015:2013 +A1:2015,
EN 61547:2009
Safety Standard (LVD)
IEC 60669-2-1:2002/AMD1:2008/AMD2:2015,
IEC 60669-1:1998/AMD1:1999/AMD2:2006
EN 60669-2-1:2004 +A1:2009 +A12:2010,
EN 60669-1:2018, EN 62311:2008
RoHS Standard
2011/65/EU, (EU) 2015/863
Radio Equipment (RED)
Complies with 2014/53/EU Direc

FAQ

Q1: What do you do if Sigge does not connect to your Wi-Fi?****

– a. Check that Sigge is properly connected and has power.
– b. Make sure Bluetooth is enabled on your mobile / tablet.
– c. Make sure that Sigge and mobile / tablet are connected to the same network.
– d. Are the devices connected to the internet?
– e. Check that the password for your Wi-Fi is entered correctly.
– f. Check that any firewall is not blocking traffic.

Q2: What happens if my Wi-Fi connects?****

– Sigge must be connected to Wi-Fi to be controlled via the App.

Q3: How to change the Wi-Fi network or password for Wi-Fi?****

– Repeat the pairing process from step 5.

Q4: How do you reset Sigge?****

– Switch the power to the luminaire on / off 3 successions (OFF-ON-OFF-ON-OFF- ON), then wait 1-3 seconds untarts flashing.

Product informaacturer declare available at: www.luminans.com
JP Internaechnologies AB, Runstensvägen 5, S-175 61 Järfälla
[email protected]
www.luminans.com

References

• Luminans LED lighting without compromise - Luminans

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>