GRANDSTREAM GUV3060 True Wireless Earbuds User Guide
- June 6, 2024
- GRANDSTREAM
Table of Contents
- GRANDSTREAM GUV3060 True Wireless Earbuds
- Headset Components
- Package contents
- Pairing Procedure
- Charging the Charging Box
- Charging the Earbuds
- Wireless Charging
- Charging Indicator Status
- How to use the Earbuds
- Certification information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GRANDSTREAM GUV3060 True Wireless Earbuds
Headset Components
Package contents
Pairing Procedure
Enter Pairing Mode
Opening the top cover of the charging box will trigger the automatic pairing
mode with both indicator lights flashing.
Note: The pairing takes about 10s and the sound “connected” indicates its
success.
Start Pairing
Enable “Bluetooth” function on the phone, search for “GUV3060”, click to
connect and wait for the sound “connected’ indicating its success.
During this process, both indicator lights will turn off first and then the
blue indicator light would turn to slow flashing.
Note: The earbuds would shut down for power saving when not connected to the Bluetooth device for 5 minutes.
Charging the Charging Box
Connect the Charging Box to a powered USB port using the USB Type-C cable.
Note: It takes about 2 hours to fully charge the charging box and the
earbuds.
Charging the Earbuds
Place the earbuds inside the Charging Box. The magnet parts inside would
adjust the earbuds to a fit condition.
Note: It takes about 2 hours to fully charge the earbuds.
Wireless Charging
Place the charging box on the center of the wireless charger (not provided) as
shown in the illustration.
Note: It takes about 4 hours to fully charge the earbuds and the charging box.
Charging Indicator Status
How to use the Earbuds
Certification information
Common part:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canada Regulatory Information
This device complies with Innovation, Science, and Economic Development Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.
EU Regulatory Information
Support Frequency Bands and Power:
BT/BLE 2402-2480 MHz<1dBm
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows:
Hereby, [Grandstream Networks, Inc.] declares that the radio equipment type
[GUV3060] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.grandstream.com
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215 USA
Voice: 617-566-9300
Fax: 617-249-1987
www.grandstream.com
For Certification, Warranty and RMA information, please visit
www.grandstream.com
FCC ID: YZZGUV3060
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>