BLAUPUNKT BH7TVG TV Wireless Headphones Instruction Manual
- June 6, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT BH7TVG TV Wireless Headphones
GENERAL SAFETY INSTRUCTIONS
Read this manual thoroughly before you start using the headphone. Store this
manual, the completed warranty card, your receipt, and the product packaging.
The safety precautions instructions reduce the risk of fire, electric shock,
and injury when correctly complied with.
Please follow all instructions and take notice of all warnings.
IMPORTANT INFORMATION
- Only using furniture that can safely support the Products.
- Ensure the Product is not overhanging the edge of the supporting furniture.
- Do not temper or change or modify the product in any way.
- Only use Accessories outlined and recommended by the manufacturer.
- Please do not expose the product to splashing or water contact
- Please do not place any object on top of the product
GENERAL SAFETY INSTRUCTIONS (Cont.)
WARNINGS
Read the below warnings thoroughly before your start using your headphones.
Store this quick start guide, warranty, and receipt alongside product
packaging.
To reduce the risk of injury:
- Keep batteries out of reach of children.
- Do not heat, open, or dispose of the battery pack in a fire.
- Do not allow metal objects to touch the battery on the device.
- Do not expose the battery pack to excessive heat.
Listening at a high volume for a long time may damage your hearing. It is recommended that you use the lowest volume necessary when speaking and listening to music.
PRODUCT OVERVIEW
LOCATION OF CONTROLS – HEADPHONES
PRODUCT OVERVIEW
FIRST TIME SETUP/USE
-
Connect the power adaptor into the wall outlet. Connect the other end of the power adaptor (micro USB) into the Charging Stand Base.
-
2. Place the headphones on the top of the charging base. Make sure that both indicator lights are facing towards you on the Headphone and the Charging Stand Base.
– When charging correctly, both indicator lights will stay RED. -
When headphones are completely charged, the indicator light will turn off.
– Headphones will automatically turn off after 5 mins of inactivity.
Connecting to TV – RCA
USING RCA/3.5mm CABLE
-
Connect the white and red plugs (included) into the TV White and Red Audio Out Plugs.
Note: Make sure L/R (white/red) plugs are not inserted into the TVs Audio INPUT -
Connect the other end 3.5mm Jack into the Stereo IN jack on the charging stand base.
NOTE: You can also use a 3.5mm to 3.5mm AUX Audio cable (not included) to connect the TV to the Stand charging base.
Connecting to TV – Optical
USING OPTICAL CABLE
- Connect the optical cable plug (not included) into the TV optical port.
- Connect the other end optical port into the Optical port on the charging stand base.
Audio Passthrough
EXPLANATION OF AUDIO PASSTHROUGH
Audio passthrough allows for you to pass AUDIO from your TV, Through your
headphones to an external speaker device such as a soundbar.
Please see the below 2 options of audio passthrough through RCA or Optical:
NOTE: Only 1x Audio RCA (white/white) to 3.5mm Jack is supplied.
RCA / 3.5MM AUDIO PASSTHROUGH
Audio Passthrough (Cont.)
OPTICAL AUDIO PASSTHROUGH
Please note optical cables are not supplied.
Audio Passthrough (Cont.)
CHECK SETTINGS OF YOUR TV FOR AUDIO PASSTHROUGH
If you have a soundbar or other audio equipment already connected to your
Television. Using your Stand base headphones to pass through the audio while
allowing you to still use the headphones is one of the benefits of this
product.
NOTE : If you already have a STEREO IN port used on the charging base,
the Optical Port will not function.
- Make sure the home theatre or stereo system is set to the appropriate audio output for the optical connection and that the optical cable is plugged into both devices correctly.
- On the TV, Go to the SOUND menu and adjust TV settings to EXTERNAL SPEAKERS or adjust your AUDIO SYSTEM / Digital Audio output to PCM.
NOTE : Audio settings vary depending on TV brand and manufacturer. This Guide is just a very generic example of what to look for.
General Operation
POWER ON/OFF
- Press and hold the power button (2 seconds) until the Headphone indicator turns blue (indicating the device is on).
- Press and hold the power button to power off.
- NOTE: When placing headphones onto the stand base charging pins, the headphones will automatically turn off.
FIRST TIME USE
-
When headphones are charged and you remove them from the stand base. Place the headphones on your head and press and hold the power button to turn on the headphones.
-
Once turned on, wait up to 10 seconds for the Headphones and Stand base to SYNC. When completed SYNC, the indicator lights will light up solid blue, and headphones will make a BEEP noise 3 times.
-
Now that your HEadphone and Stand base are SYNCED. You can now begin to watch and listen to your TV.
TROUBLESHOOTING
Never try to repair the product yourself. If you encounter any problems when using this unit, check the following points before seeking service.
| Problem | Solution |
|---|---|
| No Power | • Ensure that the supplied external power adaptor is connected to |
the power socket outlet.
• Ensure that there is power at the AC outlet.
• Press the standby button to turn the unit on.
No response from the unit| • Disconnect and reconnect the power plug, then
turn the unit on again.
My headphones are not syncing with the charging stand base| 1. Turn the
charging base upside down. Press the Pairing button indicated on page 8 and
Mute button on headphones indicated on page 7 of this manual at the same time
for about
3 seconds, the power led will start flashing. Wait until the indicator lights stay on steady
2. Follow the first-time use instructions indicated on page 15 to SYNC the headphones with the stand base.
SPECIFICATIONS
| Power Supply | DC 5V 1A |
|---|---|
| Speaker Driver | 40mm |
| Frequency Response | 20Hz~20KHz |
| Wireless Connectivity | 2.4 GHz |
| Working Time | Up to 10 Hours |
| Charging Time | Up to 3 Hours |
| Weights | Net: 0.2 kg |
CUSTOMER SUPPORT:
[email protected]
DISTRIBUTED BY:
Ayonz Pty Ltd