POWER WATCHDOG 50 Amp Bluetooth Surge Protector with Auto Shutoff- Portable Instructions
- June 6, 2024
- POWER WATCHDOG
Table of Contents
POWER WATCHDOG 50 Amp Bluetooth Surge Protector with Auto Shutoff-
Portable
-
Step One:
Loosen and unscrew the top and bottom cable gland connectors.
-
Step Two:
Unscrew the 8 Phillips screws on the back side of the unit.
-
Step Three:
Carefully separate the top and bottom halves of the Power Watchdog Unit.
-
Step Four:
Unclip the connections. Take note of where these connections come from.
-
Step Five:
Carefully slide out the used up surge module.
-
Step Six:
Slide in the new surge module into the slots inside the Power Watchdog unit. clip the connections.
-
Step Seven:
Place top and bottom halves together, re-screw all the screws, tighten down the cable gland connectors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>