EVERBILT SUP54-HD Submersible Utility Pump User Guide
- June 6, 2024
- Everbilt
Table of Contents
Submersible Utility Pump
Quick Reference Guide
See the instruction manual for complete instructional details.
-
Attach 1″ garden hose to the discharge of the pump. If a smaller 3/4″ hose is preferred, attach the threaded adapter to the pump discharge before attaching the hose.
-
Install the pump on a firm, level base. Avoid pumping mud, rock, or other debris.
-
The pump will need a minimum of 1-1/2″ of water to prime. Once primed, the pump can remove water down to 3/16″
-
Plug the pump into a 115V GFCI Power Outlet
-
To avoid airlock, the pump must be sufficiently submerged before pumping. If the pump is not pumping, tilt the pump to release the air bubbles from the bottom, then return to the vertical position. Unplug the pump from its power source when finished pumping, do not let the pump run dry.
EB-0050 01-22
Documents / Resources
|
EVERBILT SUP54-HD Submersible Utility
Pump
[pdf] User Guide
SUP54-HD, Submersible Utility Pump
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>