EPOWP XYLBG-F2828B-R Large Framed Round with Lamp Hanging Wall Mount Bathroom Vanity Mirror Installation Guide

EPOWP XYLBG-F2828B-R Large Framed Round with Lamp Hanging Wall Mount Bathroom Vanity Mirror Installation Guide

WARNING AND SAFETY INSTRUCTIONS

Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.

WARNING
Risk of Fire and Electric Shock

• All fittings must be instated in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
• Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
• Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
• Regularly check the cord, the transformer and all other parts for damage. If any part is dam-aged the product should not be used.

INSTALLATION SAFETY

• Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
• Ensure Were are no hidden pipes or cables in the wall before drilling.
• Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.

CAUTION
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.

NOTE: The important safeguards and instructions that appear in this manual are not meant to cover al possible conditions and situations that may occur. It must be understood that common sense, caution and care, are factors that can t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazard-ous locations.

TOOLS REQUIED

HARDWARE LIST

HARDWARE LIST

ITEM

|

REFERENCE IMAGE

|

NAME

|

QTY

1

| |

Screw ST4 35

|

5

2

|

|

Wall Anchor

|

5

ASSEMBLY INSTRUCTIONS

Step 1
Use the tape measure to survey the high, and draw the horizontal line and the vertical line of the wash-basin.

Step 2
Measure the distance of the holes, and mark the holes’ place

Step 3
Drill and insert the Wall Anchor

Step 4
Align the holes of the accessorie with the screws and hang them to complete the installation

Step 5
Hang the mirror with the pendant, measure the position of the holes with the tape measure

step 6
Use the tape measure the height, and draw the horizontal line and the vertical line of the wash-basin.

Step 7
Drill and insert the Anchor

Step 8
Drive in the screw cross the bottom support

Step 9
Fix the holes on the back of the mirror with the matching screws and hook them to complete the installation

Step 10
We provide plug with mirrors.
Optional to cut the plug directly and connect to electrical wiring if using wall switch.

 After power on, the button shows blue and it is in waiting state
 Long holding to make the light gradually dims Long holding again and the light gradually brightens

 After power on, the button shows blue and it is in waiting state
 lick to turn on the defogging function and the button turn to white Click again to turn off the defogging function and the button turn to blue

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>