THINKCAR Thinkobd 900 Automotive Diagnostic Tool Instruction Manual

: June 6, 2024
: THINKCAR

Table of Contents

Fuction Description
How to Use
Update
Start Diagnostic
Warranty Card
Read User Manual Online (PDF format)
Download This Manual (PDF format)

www.thinkcar.com Thinkobd 900 Automotive Diagnostic Tool
Instruction Manual

Fuction Description

Compatible with vehicles after 1966 and vehicles with updated OBDII protocol.
Read & clear DTCS, turn off check engine light.
Graphic live data stream for effective troubleshooting.
Test of 02 sensors,on-board monitor & EVAP system for emission inspection.
Built-in DTC lookup Library, no need to search for DTC definitions.
View VIN, CID, and CVN, quickly know vehicle identification.
Supports English, French, Spanish, German, Russian, Japanese, Italian, and Portuguese.
Printing diagnostic data immediately and is easy to read.
Compatible with IS09141, KWP2000, J1850PWM, J1850VWM, J1850VPW, and can OBD II protocol.

How to Use

Locate the vehicle’s DLC (OBDII) socket.
Note: Turn on the ignition of the vehicle, the voltage range of the device should be 9-181%, and the throttle should be in the closed position.
Select “Diagnose” and click “OK” to enter the system diagnosis,
Select “ERASE CODES” to clear the fault code,
Select “DATASTREAM” View all data streams,
Select “EVAP SYSTEM” and click “OK” to view EVAP data streams,
Select “ON-BOARD MONITORING” and click “OK” to view On-Board Monitor data streams,
Select “02 SENSOR TEST” and click “OK” to view 02 Sensor dataStream,
Select “FREEZE FRAME” and click “OK” to view the freeze frame data stream
Select” I/M READINESS” and click “OK” to view the I/M data flow
Select “REVIEW” and click “OK” View diagnostic records and delete records
Select “DTC LOOKUP” to query fault code analysis
Select “Print” and click “OK” to enter the “UPLOAD RECORD” interface to view the prompts, click “Help and I/M” to view the prompts and operate whether to delete the information
Select “Help” to introduce the device OBD function and system instructions
Select “Settings” to set the native language, unit of measure and record mode, sound
Select “info” to view local information

Note: Thank you for using THINKOBD 900. Before using it, please go to http://wwwthinkcarcom to check if there is an updated software. If you have the latest software, please update the latest version before use.

Update

The tool can be updated via a USB cable.
Note: Make sure that the computer has an Internet connection.
1.1 Please go to http://www.thinkcar.com official website to find the “THINKOBD Update TOOL” download tool “Product Update Tool Setup.exe” to the computer. Unzip and install it on your computer (compatible with Windows XP, 7, 8, and 10).
1.2 After the installation is complete, connect one end of the USB data cable to the USB port of the computer, Mini USB port on the other end of the tool.
1.3 First insert the device into the computer identification port, then open the OBD900 upgrade tool, find the “COMFLG.INI” file to open and change the “Serial Name” in the file to the computer and device port “USB-COM name” consistent.
1.4 Finally, open the “CReaderV Plus Upgrade Tool.exe” of the OBD900 installation package file, and dick “start upgrade” to complete the upgrade.

Start Diagnostic

Preparation.
Turn the vehicle ignition on.
Vehicle battery voltage range should be 9-18Volts Throttle should be in a closed position.
Vehicle Connection.
2.1 Locate the vehicle’s DLC socket: The DLC (Diagnostic Link Connector) is usually located 12 inches form the center of the steering wheel under or around the driver’s side for most vehicles if the DLC cannot be found refer to the vehicle’s service manual for the location.
2.2 Connect the diagnostic cable to the vehicle’s DLC,the tool will be automatically powered up. 2.3 The tool is now ready to work.
Diagnostic view
Download the ‘ThinkDiag+” app on the Google app. After the diagnosis is over, generate a PDF, click “share” to open “Bluetooth”, search for the name that needs to be transferred to the phone, and click send.

Warranty Card

For non-human quality problems, we accept returns in one month without any reason. Within one year, free warranty.
Before replacement, please ensure complete packaging; Before replacement/repair, please call the service number to get the shipping address.
Product warranty starting date is based on the payment date.

Service Line: 1-833-692-2766
Customer Service Email: support@thinkcarus.com
Products tutorial, videos, FAQ, and coverage list are available on Think car’s official website.

@thinkcarofficial @ObdThinkcar
Note: This Quick Stan Guide is subject to change without written notice.

FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

IC Statement
This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device.

The term “IC: ” before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.