THINKCAR TK-IMT602 Fuel Injector Cleaner and Tester User Manual
- June 1, 2024
- THINKCAR
Table of Contents
THINKCAR TK-IMT602 Fuel Injector Cleaner and Tester
Specifications
- Power Supply: < 90%
- Temperature Range: 0 ~ +50°C
- Current: < 400 A/m
- Tank Capacity: 1500 ml
- Cleaning Agent Capacity: 125 ml
- Speed Range: 0 ~ 7500 rpm
- Injection Time: 0 ~ 20.0 ms, in steps of 0.1 ms
- Timing: 250 W
- Ultrasonic Cleaning Power: 70 W (intermittent operation)
- Weight: 16 Kg
| Specification | Detail |
|---|---|
| Power Supply | AC 220 V / 110 V ± 10 % |
| Frequency | 50 Hz / 60 Hz ± 0,5 |
| Relative Humidity | < 90 % |
| Ambient Temperature | 0 °C ~ + 50 °C |
| External Magnetic Field Intensity | < 400 A/m |
| Oil Tank Volume | 1500 ml |
| Graduated Cylinder Volume | 125 ml |
| Speed | 0 ~ 7500 tr/min |
| Injection Time | 0 ~ 20,0 ms, pas de 0,1 ms |
| PWM Width | 0 ~ 20,0 ms, pas de 0,1 ms |
| Timing | 0 ~ 72 psi |
| System Pressure | 0 ~ 20 min |
| Ultrasonic Cleaning Power | 70 W intermittent |
| Power | 250 W |
| Dimensions | (L x l x H) 380 mm x 485 mm x 470 mm |
| Net Weight | 16 Kg |
Product Usage Instructions
1. Installation:
Ensure the injector is properly installed, and the intake injector is correctly positioned.
2. Operation:
Follow these steps to operate the TK-IMT602 Fuel Injector Cleaner & Tester:
- Press the appropriate buttons to select the desired function or pulse width.
- Adjust the injection time as needed.
- Select functions from the menu.
- Press START to begin the cleaning process.
- Press PAUSE if needed during the operation.
- Press STOP to end the cleaning cycle.
3. Maintenance:
Regularly clean and maintain the device to ensure proper functioning. Check for leaks and address them promptly.
4. Service and Warranty:
For warranty and service inquiries, please refer to the provided warranty conditions. Contact us for any product-related issues.
FAQs
How do I know when to refill the cleaning agent?
The device will indicate when the cleaning agent level is low, prompting you to refill it before continuing with the operation.
Can I use any cleaning agent with this product?
It is recommended to use the specified cleaning agent capacity mentioned in the specifications for optimal performance and compatibility.
What is the purpose of the TK-IMT602?
The TK-IMT602 is designed to clean and test fuel injectors for automotive use.
What power supply is needed for the TK-IMT602?
The device requires an AC 220 V / 110 V ± 10 % power supply.
Is there a specific temperature range for operating the TK-IMT602?
Yes, it should be operated within an ambient temperature range of 0 °C to + 50 °C.
Where can I find additional information or support for the TK-IMT602?
Additional information, videos, FAQs, and troubleshooting guides can be found on the official Thinkcar website at www.thinkcar.com.
For more information, visit www.thinkcar.com
“`
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>