THINKCAR THINKDIAG 2 Automotive Diagnostic Device User Manual

Check Vehicle Coverage

You can check the supported vehicles of THINKDIAG 2 on Think car official website. https://www.thinkcar.com

Download ThinkDiag+ App and Login

Search for “ThinkDiagt” in GooglePlay, “ThinkDiag” in App store. The ThinkDiag+ App is FREE to download. (as shown in the figure below)

Activate Your THINKDIAG 2

When you click on any diagnostic function, the following page appears. Click on the “Activate” button in ThinkDiag+ App. Input the serial number and 8-digit activation code.

Insert the THINKDIAG 2 into Vehicle’s OBDII Port

As shown below, there are 5 common locations for OBDII port. Insert the THINKDIAG 2, the device is power on if the light turns green.

Connect the App and Device via Bluetooth

After inserting the device into vehicle’s OBDII port, open the ThinkDiag+ app and start the diagnosis. (It will automatically connect with the Bluetooth in the device during the diagnostic process).

Download the Diagnostic Software

THINKDIAG 2 will automatically download the corresponding software for your vehicle during the diagnostics for the first time. Later, there is no need to download the software again.

Home page

Click “OBD fuction” on the home page to enter the OBD function. There are 8 function menus to choose from: Read fault code, clear fault code, read
data stream, freeze frame, O2 sensor test, ON-BOARD montoring, EVAP system.

OBD FUNCTIONS
OBD scan will inspect emission related issues of powertrain.

Click “ALL SYSTEMS DIAGNOSTIC” on the home page to access the all systems diagnosis DIAGNOSTIC function. After entering, you can choose to read VIN information intelligently or choose your own vehicle brand to enter diagnosis.

ALL SYSTEMS DIAGNOSTIC
Enhanced diagnostic for all systems. Read and clear fault codes, read data stream, etc.

Different Lights While Using Your THINKDIAG 2

Continuous red light: The device is power on
Continuous blue light: Bluetooth is connected
Continuous green light: Diagnostic connection indicator

After-sales Service

1. In addition to the legal withdrawal right, you benefit from a 30-day money back guarantee. The device is also guaranteed for a period of one year.
2. Before replacement, please ensure complete packaging; Before replacement/repair, please call the service number to get the shipping address.
3. Product warranty starting date is based on the payment date.

Service Line: 1-833-692-2766
Customer Service Email: support@thinkcarus.com
Official Website: www.thinkcar.com
Follow us on Facebook: @thinkcar.official
Twitter: @ObdThinkcar

www.thinkcar.com

FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

IC Requirement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>