NEBULA D2150111 Cosmos Max 4K Home Projector User Guide
- June 6, 2024
- NEBULA
Table of Contents
NEBULA D2150111 Cosmos Max 4K Home Projector User Guide
NEBULA D2150111 Cosmos Max 4K Home Projector
Remote Control: Nebula RC Model: 00413
- Download the Nebula Connect app from the App Store (i0S devices) or Google Play (Android devices) to control your projector.
- Enable Bluetooth on your smartphone. (I) Open the Nebula Connect app, and follow the on-screen instructions to complete the connection setup.
Wirelessly cast movies, games, and music from your phone to Nebula
Cosmos Max.
- Play a video clip on your phone and then tap the cast icon k I on the video screen.
- Select the device “D2150” you want to cast to.
- This projector will mirror the screen of the connected phone or computer.
The HDMI port and USB port cannot be used to simultaneously stream video and audio content.
important Safety Instructions
- Due to the enclosure material, the product must only be connected to a USB 2.0 or higher.
- The adapter should be installed near the equipment and must be easily accessible.
- Do not use the device in an environment where the temperature is too high or too low. Never expose the device to strong sunshine or wet environments.
- The ideal temperature range for this product and its accessories is 41°F – 95°F / 5°C – 35°C.
- When charging, place the device in an environment with a temperature that ranges between 41°F – 77°F / 5°C – 25°C as well as good ventilation.
- Only use the charger provided by the manufacturer. Using unauthorized chargers may cause danger and violate the projector’s guarantee.
- This charger is for indoor use only. • The charger type is HKA18019095-6C with output voltage / current of DC19V/9.47A. The plug of the adapter is considered as the disconnect device. Once unplugged, the charger is considered as disconnected from the power source.
- Possibly hazardous optical radiation emitted from this product, do not stare at operating beam. Maybe harmful to the eyes.
Notice
This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the website: uk.seenebula.com. RF exposure information for D2150 The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and human body. Bluetooth BT Maximum output power 6.858 dBm(EIRP); Bluetooth Operating BT Frequency band: 2402-2480 MHz; Wi-Fi Max Output Power: 19. 67 dBm (EIRP for2.40; 19. 62 dBm (EIRP for 5G); Wi-Fi Frequency Band: 2412-2472 MHz (2.40); 5150-5250 MHz, 5725-5850 MHz (50). 5150-5250 MHz can be used indoor only.
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. UK This product complies with the radio interference CPI requirements of the United Kingdom Declaration of Conformity. Hereby, Anker Innovations Limited declares that the product type D2150 is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following Internet address: https://uk.seenebula.com Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2M, United Kingdom
FCC Notice
This device complies with the FCC rules, Part 15. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and(2) This device must
accept any interference received, including interference that may cause
undesired operation. Warning: Changes or modifications not expressly approved
by the party responsible for compliance could void the users authority to
operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for het::
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone:1-800-988-7973
HIGH-DEFINITION MULTIMEDIA INTERFACE HEM, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing Lit in the United States and other countries
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio,Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
To get a full user manual, you can get it from the Nebula
Connect APP or website: www.seenebula.com/downloads
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>