NEBULA D2325 Anker Mars 3 Air 1080p Mini Projector User Guide

NEBULA D2325 Anker Mars 3 Air 1080p Mini Projector User Guide

At a Glance

1. Front View
2. Rear View
3. Top View
4. Bottom View

Remote Control

Overview

Prepare the Remote Control

1. Before using for the first time, slide open the battery compartment and install two AAA batteries.
2. To replace the batteries, slide open the battery compartment, insert new batteries (matching the +/- polarity as indicated), and close the battery compartment.

Charge Your Projector
Before using for the first time, fully charge the built-in battery using the provided adapter.
Power On
Press and hold the power button for 3 seconds to power on the projector.
Autofocus and Auto Keystone Correction

• Slightly move the projector to enable autofocus and auto keystone correction
• Press to enable autofocus.

Basic Setup

For first-time use, follow the on-screen instructions to complete the basic setup.
Adjust settings in the projector’s Settings menu if necessary.

Use as a Projector

1. Screen Mirroring
   Wirelessly cast movies, games, and music from your phone to Nebula Mars 3 Air.

2. Play a video clip on your phone and tap the cast icon on the video screen.

3. Select the device D2325. The projector will mirror the screen of the connected phone.
   Make sure Nebula Mars 3 Air and your phone are connected to the same wireless network.

4. Play from HDMI Playback Devices

5. Connect to an HDMI playback device such as a TV box, TV stick, DVD player, set-top box (STB), or games console.

6. Play Through External Sound Devices
   Connect to external sound output devices including headphones and speakers.

7. Play From a USB Drive
   Connect to a USB-A drive to enjoy stored music, video, and pictures.

Use as a Bluetooth Speaker
Press to switch to Bluetooth speaker mode and select Nebula Mars 3 Air to connect.
Nebula Connect App
Download the Nebula Connect app for the best projector experience.

Important Safety Instructions

• For pluggable equipment, the socket-outlet shall be easily accessible.
• Please ensure that you only use the adapter provided by the manufacturer. Using an unauthorized adapter may be dangerous and violate the Terms of Use and the product warranty.
• Do not use the product in an environment where the temperature is too high or too low. Never expose the product to strong sunshine or wet environments.
• It is recommended to charge the product in an environment with a temperature that ranges from 5℃~25℃ / 41°F~77°F.
• When supplying power, place the device in an environment that has a normal room temperature and good ventilation.
• Do not use the product in any way other than described herein in order to avoid personal injury or property damage.
• Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators’ legal liability under any circumstances.
• Possibly hazardous optical radiation emitted from this product may be harmful to the eyes. Do not stare at operating beam.

Warning:

• Replacing a battery with an incorrect type may nullify safeguards and create danger;
• Disposal of the battery/device in a fire, a hot oven, or another source of significant heat, or by mechanically crushing or cutting the battery/device may result in an explosion;
• Leaving the battery/device in an extremely hot environment may result in an explosion or leakage of flammable liquids or gases;
• Subjecting the battery/device to extremely low air pressure may result in an explosion or leakage of flammable liquids or gases.

Attention:
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Notice (Europe and the United Kingdom)

Declaration of Conformity
Hereby, Anker Innovations Limited. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site https://uk.seenebula.com/.
The suitable temperature range for the projector and its accessories is 0°C~35°C / 32℉~95℉.
The adapter is for indoor use only. The adapter type is NSA90ED-19047401 with a rated output voltage/current of 19.0VDC / 4.74A.

RF Exposure Information
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, maintain a 20cm distance between the device and the human body.

Frequency Bands and Power:

5150~5350 MHz can only be used indoors.

The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany

Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Notice (United States of America) FCC
Statement This device complies with Part 5 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: 1-800-988-7973 5150-5350 MHz can be used indoors only. Notice (Canada) IC Statement This device Complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any Interference, including interference that may cause undesired operation of the device.

This Class 8 digital apparatus complies with Canadian ICES-003.

a la norms NMB-003 du Canada. IC RE Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lois product. maintains une distance

5150-5250 MHz can be used indoors only.

Bluetooth°
The Bluetoothb word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.

HDmr
1110•01/1141110•4 MULTPACIAINTWACO
HOW and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.

HI Dolby
AUDIO
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Anker Innovations Limited I Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

PAP 22
Raccolta Carta

NEBULA
For a detailed user manual and more information, scan the QR code or visit: support.seenebula.com/s
supportmea@seenebula.com
supportmea@seenebula.com (For Midden East and Africa Only)
CED-CN@anIcer.com
+1 (800)988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (OE)
+971 529 750 842 (Middle East & Africa)
+971 8000320817 (UAE)
+9668006500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850)460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036 (OE
03 4455 7823 (El 40
+82 02-1661,9246 (tl–)
+91 18003138831 (India)

Anker Innovations Limited. All rights reserved. NEBULA and the NEBULA logo are trademarks of Anker Innovations Limited, registered in the United States and other countries.
Model: 02325
51005004180 VO1

References

• Smart Projector - Portable Home Theater Projector- Nebula UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>