NEBULA Capsule 3 Laser Portable Projector User Guide
- June 1, 2024
- NEBULA
Table of Contents
NEBULA Capsule 3 Laser Portable Projector
Specifications:
- Function: Bluetooth Speaker
- Operation Frequency: 2402-2480 MHz
- Max Power: EIRP 8 dBm
- Bluetooth Bands: 2.4 GHz
Product Usage Instructions
Pairing as Bluetooth Speaker:
To use the device as a Bluetooth speaker, follow these steps:
- Press the designated button to switch to Bluetooth speaker mode.
- Select “Nebula Capsule 3” from your Bluetooth device list to connect.
Nebula Connect App:
For an enhanced projector experience, download the Nebula Connect app.
Important Safety Instructions:
Read and follow all safety instructions provided in the manual to ensure safe
usage of the product.
Battery Caution:
Do not replace the battery with an incorrect type to avoid the risk of
explosion. Dispose of used batteries according to the instructions provided.
RF Exposure Information:
Maintain a distance of 20 cm between the device and the human body to comply
with RF exposure requirements.
FAQ:
Q: What should I do if I encounter pairing issues with Nebula Capsule 3?
A: Make sure the Bluetooth speaker mode is selected and try reconnecting
by searching for Nebula Capsule 3 on your Bluetooth device list.
Q: Can I use Nebula Capsule 3 with devices other than smartphones?
A: Yes, Nebula Capsule 3 can be paired with various Bluetooth-enabled
devices such as tablets, laptops, and more.
At a Glance
Front View
Rear View
Top View
Bottom View
Remote Control
Overview
Prepare the Remote Control
- Before using for the first time, slide open the battery compartment and install two AAA batteries.
- To replace the batteries, slide off the battery compartment cover, insert new batteries (matching the polarity +/- as indicated), and close the battery compartment.
Charge Your Projector
Use the included adapter to fully charge the built-in battery before using it for the first time.
Power On
Press and hold for 3 seconds to power on the projector.
Engage Autofocus
- Slightly move the projector to engage autofocus and auto keystone correction.
- Press to engage autofocus
Adjust Settings
Follow the on-screen instructions to complete the basic setup before using for
the first time.
Adjust settings in the projector’s Settings menu if necessary.
Use as a Projector
Screen Mirroring
Wirelessly cast movies, games, and music from your phone to Nebula Capsule 3.
- Play a video clip on your phone and tap the cast icon on the video screen.
- Select device D2425. The projector will mirror the screen of the connected phone.
Make sure Nebula Capsule 3 and your phone are connected to the same wireless network.
Play from HDMI Playback Devices
Connect to HDMI playback devices such as a TV box, TV stick, DVD player, set- top box (STB), or games console.
Play Through External Sound Devices
Connect to external sound output devices,including headphones and speakers.
Play from a USB Drive
Connect to a USB-A drive (with the USB adapter) or USB-C drive to enjoy stored music,video, and pictures.
Use as a Bluetooth Speaker
Press to switch to Bluetooth speaker mode and select Nebula Capsule 3 to connect.
Nebula Connect App
Download the Nebula Connect app for the best projector experience.
Important Safety Instructions
- For pluggable equipment, the socket outlet shall beeasily accessible.
- Please ensure that you only use the adapter provided by the manufacturer. Using an unauthorized adapter may be dangerous and violate the Terms of Use and the product warranty.
- Do not use the product in an environment where the temperature is too high or too low. Never expose the product to strong sunshine or wet environments.
- It is recommended to charge the product in an environment with a temperature that ranges from 5℃-25℃ / 41°F-77°F.
- When supplying power, place the device in an environment that has normal room temperature and good ventilation.
- Do not use the product in any way other than described herein in order to avoid personal injury or property damage.
- Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators’ legal liability under any circumstances.
- User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators’ legal liability under any circumstances.
- Possibly hazardous optical radiation emitted from this product, do not stare at operating beam. Maybe harmful to the eyes.
Warning:
- Replacing a battery with an incorrect type may nullify safeguards and create danger.
- Disposal of the battery/device in a fire, a hot oven, or another source of significant heat, or by mechanically crushing or cutting the battery/device may result in an explosion.
- Leaving the battery/device in an extremely hot environment may result in an explosion or leakage of flammable liquids or gases.
- Subjecting the battery/device to extremely low air pressure may result in an explosion or leakage of flammable liquids or gases.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Notice (Europe and United Kingdom)
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
This product complies with the radio interference requirements of the United Kingdom.
The suitable temperature range for the projector and its accessories is
0°C-35°C / 32℉-95℉.
The adapter is for indoor use only. The adapter type is NSA45EE-20022500 with
a rated output voltage/current of 5V 3A / 9V 3A/ 12V 3A/ 15V 3A/ 20V 2.25A 45W
Max
RF exposure information
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure requirements, maintain a 20 cm distance between
the device and the human body.
Frequency bands and power as below:
Function | Bands | Operation Frequency | Max Power |
---|---|---|---|
Bluetooth (Projector) | 2.4 GHz | 2402-2480 MHz | EIRP 8 dBm |
Wi-Fi (Projector)
| 2.4 GHz| 2412-2472 MHz| EIRP 20 dBm
5 GHz
| 5150-5250 MHz| EIRP 20 dBm
5250-5350 MHz| EIRP 20 dBm
5470-5725 MHz| EIRP 20 dBm
5725-5850 MHz| EIRP 20 dBm
Bluetooth (Remote Control)| 2.4 GHz| 2402-2480 MHz| EIRP 8 dBm
5150~5350 MHz can only be used indoors.
The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Your product is designed and manufactured with high quality materials and
components,which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human
health,and the environment. For more information on disposal and recycling of
this product, contact your local municipality, disposal service, or the shop
where you bought this product.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received,including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device,pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure conditions. The min separation
distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can only be used indoors.
Notice (Canada)
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
For a detailed user manual and more information,scan the QR code or visit:
support@seenebula.com
support@anker.com (日本)
support.mea@seenebula.com
(For Middle East and Africa Only)
CED-CN@anker.com(中国)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 529 750 842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036(中国)
03 4455 7823(日本)
+82 02-1661-9246 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations Limited,
registered in the United States and other countries.
Model: D2425
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>