DIZO DA2003 Realme Wireless Bluetooth Headset User Manual
- June 6, 2024
- DIZO
Table of Contents
DIZO Wireless
User Guide
-
Enter pairing mode
Separate two earbuds, then press and hold the multi-function button for 3 seconds. -
Connect to earphone
Turn on the Bluetooth of your device, then search and connect to DIZO Wireless.
Press once
Play or pause
Answer a call
End a call
Double-press
Next track
Triple-press
Gaming mode
Press and hold
1S Decline an incoming call
2S Pairing mode
3SReset to factory settings
Works with rea1me Link
Download realme Link to explore more feature
Scan to Download
https://www.realme.com/app-download#realmeLink
Contents
DILU wireless earphone Eartips (S/M/L, M installed by default) Type-C charging
cable User manual
Parameters
Moucl: DA2003 Bluetooth Max. EIRP: 7.35dBm USB type-C input: 5.0V=500mA Radio
frequency: 2400MHz-2483.5MHz
Temperature Description
The headset shall be used under an environment with 0°C –45°C temperature and
45%-85% humidity and the storage temperature shall be -20°C-35°C. The headset
shall be charged at 0°C-45°C.
The headset will be affected, and even the headset and battery may be damaged
in case of too high or too low temperature when charging.
Warning
- Don’t place the product into a liquid environment or avoid the product being exposed to high humidity
- Avoid extrusion to avert damage to the product.
- Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time.
- Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.
- Avoid the dusty, wet, and dirty environment where the electronic circuit of the equipment may be damaged if being used.
- Don’t use the equipment at the moment of a thunderstorm because the thunderstorm may incur equipment fault or shock hazard.
- Don’t use the equipment when riding a motorcycle or a bicycle, driving a car, or crossing the road to ensure your safety.
- Keep the equipment out of reach of children or pets to avert the damage.
- Don’t wash the equipment with chemicals, cleansers,s or strong detergents.
Don’t listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.
Battery warning
The built-in lithium battery of the product is forbidden to be disassembled,
impacted, extruded, or put into the fire. The battery under very low air
pressure may result in explosion or flammable liquid or gas leakage. Avoid the
battery in a high-temperature environment or being exposed to strong sunlight
to avert the explosion. Don’t use the battery continuously in case of serious
ballooning. The battery shall be handled pursuant to the local regulations and
shall not be disposed of as household garbage. Don’t try to repair, remove or
refit the battery. The explosion may happen if the battery is replaced by the
one subject to an incorrect model. Don’t compress or puncture the battery with
a hard object. The battery leakage, overheating or outbreak of a fire may
occur if the battery is destroyed.
CE
Declaration of Conformity: Hereby, Realfit (Shenzhen) Intelligent Technology
Co., Ltd., declares that this device is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: http://www.dizo.net/eu-compliance
RF exposure information: The EIRP power of the device at maximal case is below
the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment
has been performed to prove that this unit will not generate the harmful EM
emission above the reference level as specified in EC Council
Recommendation(1999/519/EC).
Recycling Initiative (India)
At DIZO we understand that our responsibility doesn’t end at selling you our
products. DIZO has been working in the area of safe disposal of electronic
waste. Since mobiles, tablets, and other electronic items are made of
hazardous constituents. Under the Guidelines of Ministry of Environment,
Forest and Climate Change, Government of India, E-waste (Management) Rule,
2016 and Amendment E-waste Rule 2018.
DIZO will seek shared responsibility and cooperation from customers in
reducing the environmental impact of their products. DIZO will comply with all
the applicable laws related to E-waste management.
For more information on safe disposal, recycling and you may write an email to [email protected] or contact our Toll-Free No. 1800-843-3030
Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage.
Warranty
Thank you for purchasing DIZO products.
- We will provide comprehensive warranty services according to local laws and regulations.
- For more details about our warranty policy, please visit https://www.dizo.net.
Matters Needing Attention
- When you buy the product, the sales unit will issue a valid proof of purchase.
- The warranty card and the proof of purchase should be kept by the user properly, and they will not be replaced if lost.
- If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the DIZO customer service center for free maintenance during the warranty period.
Non-warranty situation
This warranty does not cover the following cases:
- Out of warranty period.
- Damage caused by use not in accordance with the instructions.
- Damage caused by man-made causes.
- Failure caused by unauthorized disassembly, maintenance, or modification of the product.
- Damage is caused by force majeure factors (such as floods, earthquakes, lightning, etc.).
- There is no warranty card, invoice, or warranty card that does not match the invoice information.
- The product wears naturally.
- Other failures and damages are not caused by the quality of the product itself.
Website: www.dizo.net
FCC
StatementThis device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: • Reorient or relocate the receiving antenna.• Increase
the separation between the equipment and receiver.• Connect the equipment into
an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help with
important announcements Important
Note: Radiation Exposure StatementThis equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 0cm between the
radiator and your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. RF exposure requirement:
The device has been evaluated to meet general RF exposure requirements, The
device can be used in portable exposure conditions without restriction.
Federal Communication Commission (FCC) Radiation Exposure Statement Power is
so low that no RF exposure calculation is needed. FCC ID: 2AYPPDA2003 .
Warranty Card (Stub Copy)
Dear user, thank you for using the product of our company. Please read and
keep properly the warranty card after purchasing the product so that we can
provide better services to you.
User Information
User’s name———
Phone Number———–
Address Email——–
Product Information
Product Model
Product Serial Number
Sales Information
Purchase Date _
Invoice Number
Sales Unit
Phone Number
Address
Warranty Card (Customer Copy)
Dear user, thank you for using the product of our company. Please read and
keep properly the card after purchasing the product so that we can provide
better services to you.
User Information
Users name
Phone Number
Address
Email
Product Information
Product Model _
Product Serial Number
Sales Information
Purchase Date
Invoice Number
Sales Unit
Phone Number
Address