DIZO DA2123 Buds Z Pro True Wireless Bluetooth Headset User Manual

DIZO Buds Z Pro
User Guide

DA2123 Buds Z Pro True Wireless Bluetooth Headset

1. Enter pairing mode
   Open up the charging case to enter pairing mode
   Factory reset: Long press both earbuds for 10s

2. Connect earbuds
   Turn on Bluetooth on smartphone, search and connect to “DIZO Buds Z Pro”

Touch control

Touch twice: Play/pause music; Answer/hang up.
Touch three times: Next song.
Press and hold for 2s: Reject incoming call.
Press and hold both left and right earbuds for 2s: Enter/Exit Game Mode.

Use with realme Link

Users can download realme Link to install additional features for DIZO Buds Z Pro
Search realme Link in APP Store, or scan the following QR code to download

Basic Parameters

About 25h (use with charging case)
Charging time| About 2h
Bluetooth communication distance| ≤10m
Working frequency| 2402-2480MHz
Max power rate| < 10dBm

Packing List

1. DIZO Buds Z Pro x 1
2. Ear tips x 6 (two of them have been mounted)
3. User Guide x 1
4. Type-C charging cable x 1

Disposal and Recycling Information

This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage.
Input: 5.0V 0.5A
Output: 5.0V ****0.2A
Operation temperature: 0~45°C
Bluetooth Max. EIRP:8.75dBm

Battery warning

The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into fire. The battery under the very low air pressure may result in explosion or flammable liquid or
gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don’t try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don’t compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.
Declaration of Conformity:
****Hereby, Realfit (Shenzhen) Intelligent Technology Co., Ltd., declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:https://www.dizo.net/global/eu-compliance
SAR: RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN 50663:2017. RF exposure assessment has been performed to prove
that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).

FCC Statement

This device complies with port 15 of the FCC Rules. Operation is subject to the folowng two conditions: Ill the device may not cause harmful interference. and (21 this device must accept any nterference received. including interference that may cause undesired operation Changes or modifccroans not expressly approved by the party responsible for compliance could void the user’s authority to operate the equpment
NOTE: This equipment has been tested and found to compfy with the knits for a Class 8 digital device. pursuant to port 1S of the FCC Rules. These knits are designed to provide reasonable protection aganst harmful interference no residential installation. This equipment generates uses and can radiate rodeo frequency energy and. if not installed and used in accordance with the rn-tructions, may cause harmful interference to radio communications. However. there is no guarantee that interference MI not occur n o particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and co, the user Is encouraged to try to correct the interference by one or more of the fotormg measures:

• Reorient or relocate the receiving antenna.
• increase the separation between the et:Moment and receiver.
• Connect the equipment Into on outlet on a cbrult different from that to which the receiver Is corrected.
• Consult the dealer or an experenced radio/TV technician for help important announcement

Important Note:
Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used n portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.

FCC !Cr. 2AVPPDA2123
Warning

1. Don’t place the product into o !quid environment or ovoid the product exposed to high humidity.
2. Avoid extrusion to overt the damage to the product.
3. Don’t attempt to dismantle the Product. Put the product in 0 cool and dry place to keep it dry if Stored for a long time.
4. Avold touching the strong magnet to prevent the magnetic headset from being demagnetized.
5. Avoid the dusty, wet and dirty environment where the electroric circuit of the equipment may be damaged if being used.
6. Don’t use the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard.
7. Don’t use the equipment when nano o motorcycle or a bicycle, driving a cor or crossing the rood to ensure your safety.
8. Keep the equipment out of reach of children or pets to overt the damage.
9. Don’t wash the equipment with chemical, cleanser or strong detergent.

Don’t listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.

Warranty

Thank you for purchasing DIZO products.

1. We will provide comprehensive warranty services according to local lows and regulations.
2. From more details about our warranty policy, please visit wwwdizo.net/global

Matters Needing Attention:

1. When you buy the product. the sales unit wil issue a valid proof of purchase.
2. The warranty card and the proof of purchase should be kept by the user property. and it wil not be replaced if lost.
3. If the product fails due to non-human factors. the user can present the warranty cord and proof of purchase to the DIZO customer service center for free maintenance during the warranty period.

Non-warranty situation:
This warranty does not cover the following cases:

1. Out of warranty period.
2. Damage caused by use not in accordance with the instructions.
3. Damage caused by man-mode causes.
4. Failure caused by unauthorized disassembly. maintenonce, or modification of the product.
5. Damage caused by force mojeure factors (such as floods. earthquakes, lightning. etc.).
6. There is no warranty card. invoice. or warranty card that does not notch the invoice information.
7. The product wears noturally
8. Other failures and damages that are not caused by the quality of the product itself.

Website : www.dizo.net/global

Warranty Card (Stub Copy)
Dear user. thank you for using the product of our company. Please read and keep properly the warranty card after purchasing the product so that we can provae better services to you.
User Information
User’s none ………………
Phone Number …………………
Address ………………………
Product Information
Product Mode: ………………..
Product Serial Number ………………….
Sales Information
Purchase Date ………………………………..
Invoce Number ……………………………
Sates Unit ……………………………………
Phone Number…………………………………
Adckess ……………………………………
Warranty Card (Customer Copy)
Dear user, thank you for using the product of our company. Pease read and keep properly the warranty cord after purchosng the product so that we can provide better services to you.
User Information
User’s name………………………..
Phone Number …………………..
Address ………………………………..
Ernal …………………………………………..
Product Information
Product Mode’………………………
Product Serial Number. ……………………..
Sales Information
Purchase Date ………………………………….
Invoice Number ……………………………
Sales Urrt………………………………………
Phone Number …………………………….
Address …………………………………………

Realfit (Shenzhen) Intelligent Technology Co., Ltd.
Room B301, Building F2, TCL Science Park, No. 1001, Zhongshanyuan Road,
Shuguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>