DIZO Buds Z TWS Earbuds User Guide

June 6, 2024
DIZO

DIZO Buds
User Guide

  1. Enter pairing mode
    Open up the charging case to enter pairing mode

  2. Connect earbuds
    Turn on Bluetooth on a smartphone, search and connect to “DIZO Buds Z”

Touch control
Touch twice: Play/pause music;
Answer/hang up.
Touch three times: Next song.
Press and hold for 2s: Reject an incoming call.
Press and hold both left and right earbuds for 2s:
Enter/Exit Game Mode.

  • If the pairing of the left and right earphones fails touch one earphone 5 times and then the other 5 times to pair the two earphones.

Use with realme Link
Users can download real-time Link to install additional features for DIZO Buds Z
Search realme Link in APP Store, or scan the following QR code to download

https://play.google.com/store/apps/details?id=com.realme.link|
---|---

Basic Parameters

Product name DIZO Buds Z
Product model       DA2117
Bluetooth version  Bluetooth 5.0
Bluetooth protocol HFP/A2DP/AVRCP
Bluetooth code SBC
Charging interface    Type-C
Endurance (music) About 4.5h (earbuds) About 16.5h (use with charging case)
Charging time About 2h
Bluetooth communication distance ≤10m
Working frequency 2402-2480MHz
Max power rate < 10dBm

Packing List
1、DIZO Buds Z x 1
2、Ear tips x 6 (two of them have been mounted)
3、User Guide x 1
4、Type-C charging cable x 1

Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included), and/or the packaging indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage.

Operation temperature: 0~45℃
Input: 5.0V 0.5A
Output: 5.0V 0.2A
Battery warning
The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded, or put into fire. The battery under very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert the explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed of as household garbage. Don’t try to repair,  remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to an incorrect model. Don’t compress or puncture the battery with a hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.

Declaration of Conformity:
Hereby, Realfit (Shenzhen) Intelligent Technology Co., Ltd., declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of  conformity is available at the following internet address: https://www.dizo.net/global/eu-compliance
SAR: RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur on a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help with an important announcement

Important Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID: 2AYPPDA2117

Warning

  1. Don’t place the product into a liquid environment or ovoid the product exposed to high humidity.
  2. Avoid extrusion to avert damage to the product.
  3. Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time.
  4. Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.
  5. Avoid the dusty, wet, and dirty environment where the electronic circuit of the equipment may be damaged if being used.
  6. Don’t use the equipment at the moment of a thunderstorm because the thunderstorm may incur equipment fault or shock hazard
  7. Don’t use the equipment when riding a motorcycle or a bicycle, driving a car, or crossing the road to ensure your safety.
  8. Keep the equipment out of reach of children or pets to avert the damage.
  9. Don’t wash the equipment with chemicals, cleaners, or strong detergents.
    Don’t listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.

Warranty
Thank you for purchasing DIZO products.

  1. We will provide comprehensive warranty services according to local laws and regulations.
  2. For more details about our warranty policy, please visit www.dizo.net/global

Matters Needing Attention:

  1. When you buy the product, the sales unit will issue a valid proof of purchase.

  2. The warranty card and the proof of purchase should be kept by the user properly, and it will not be
    replaced if lost.

  3. If the product fails due to non-human factors, the user can present the warranty card and proof of
    purchase to the DIZO customer service center for free maintenance during the warranty period.

Non-warranty situation:
This warranty does not cover the following cases:

  1. Out of warranty period.
  2. Damage caused by use not in accordance with the instructions.
  3. Damage caused by man-made causes.
  4. Failure caused by unauthorized disassembly, maintenance, or modification of the product.
  5. Damage is caused by force majeure factors (such as floods, earthquakes, lightning, etc.).
  6. There is no warranty card, invoice, or warranty card that does not match the invoice information.
  7. The product wears naturally.
  8. Other failures and damages are not caused by the quality of the product itself.
    Website: www.dizo.net/global

Warranty Card (Stub Copy)
Dear user, thank you for using the product of our company. Please read and keep properly the warranty card after purchasing the product so that we can provide better services to you.
User Information
User’s name
Phone Number
Address
Email
Product Information
Product Model
Product Serial Number
Sales Information
Purchase Date
Invoice Number
Sales Unit
Phone Number
Address

Warranty Card (Customer Copy)
Dear user, thank you for using the product of our company. Please read and keep properly the warranty card after purchasing the product so that we can provide better services to you.
User Information
User’s name
Phone Number
Address
Email
Product Information
Product Model
Product Serial Number
Sales Information
Purchase Date
Invoice Number
Sales Unit
Phone Number
Address

Realfit (Shenzhen) Intelligent Technology Co., Ltd.
Room B301, Building F2, TCL Science Park, No. 1001, Zhongshanyuan Road,
Shuguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals