DIZO DA2125 Wireless Power User Guide

DIZO DA2125 Wireless Power

Enter pairing mode

Separate the two earbuds, then press and hold the multi-function button for 3 seconds.

Connect earphones

Turn on Bluetooth of your device, then search and connect to DIZO Wireless Power.

Smart controls

Use realme Link App

Download realme Link to explore more features.

Contents

• DIZO Wireless Power
• Eartips (S/M/L , M installed by default) Type-C charging cable
• User manual

Parameters

• Model: DA2125
• Bluetooth transmit power: < 8 dBm
• USB type-c input: 5.0V 0.5A
• Radio frequency: 2402MHz~2480MHz

Temperature Description

1. The headset shall be used in an environment with 0℃~45℃temperature and 45%~85%humidity, and the storage temperature shall be -20℃~35℃.
2. The headset shall be charged at 0℃~45℃
3. The headset will be affected, and even the headset and battery may be damaged in case of too high or too low temperature when charging.

Warning

1. Don’t place the product into a liquid environment or avoid the product exposed to high humidity.
2. Avoid extrusion to avert the damage to the product.
3. Don’t attempt to dismantle the product.Put the product in a cool and dry place to keep it dry if stored for a long time.
4. Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized. 5. Avoid the dusty, wet and dirty environment where the electronic circuit of the equipment may be damaged if being used.
5. Don’t ues the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard.
6. Don’t use the equipment when riding a motorcycle or a bicycle, driving a car or crossing the road to ensure your safety.
7. Keep the equipment out of reach of children or pets to avert the damage.
8. don’t wash the equipment with chemicals, cleansers or strong detergents.

Don’t listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.

FCC ID:

Realfit (Shenzhen) Intelligent Technology Co., Ltd. Room B301, Building F2, TCL Science Park, No. 1001, Zhongshanyuan Road, Shuguang Community, Xili Sub- district, Nanshan District, Shenzhen, Guangdong China

Battery warning

The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into fire. The battery under the very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don’t try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don’t compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.

Declaration of Conformity

Hereby, Realfit (Shenzhen) Intelligent Technology Co., Ltd., declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.dizo.net/eu-compliance SAR：RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN 62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).

Disposal and Recycling information

This symbol (with or without a solid bar) on the device, batteries (included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage.

FCC Statement

This device complies with Part ˝˙ of the FCC Rules. Operation is subject to the following two conditions: (˝) this device may not cause harmful interference, and (ˆ) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part ˝˙ of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o˜ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help important announcements.

Important Note:
Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.

Warranty

Thank you for purchasing DIZO products. If any manufacturing defect problems occur within 12 months from the date of purchase, user can enjoy our company’s warranty service.

Matters Needing Attention:

1. When you buy the product, the sales unit will issue a valid proof of purchase.
2. The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost.
3. If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the DIZO customer service center for free maintenance during the warranty period.

Non-warranty situation:

This warranty does not cover the following cases:

1. Out of warranty period.
2. Damage caused by use not in accordance with the instructions.
3. Damage caused by man-made causes.
4. Failure caused by unauthorized disassembly, maintenance, or modification of the product.
5. Damage caused by force majeure factors (such as floods, earthquakes, lightning, etc.).
6. There is no warranty card, invoice, or warranty card that does not match the invoice information.
7. The product wears naturally.
8. Other failures and damages that are not caused by the quality of the product itself.
   Website: www.dizo.net
   Email: [email protected]
   Toll Free: 1800-843-3030

References

• DIZO_First brand in realme TechLife ecosystem

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>