DIZO GoPods Active Noise Cancellation Earbuds User Guide
- June 10, 2024
- DIZO
Table of Contents
Go Pods Active Noise Cancellation Earbuds
User Guide
-
Enter pairing mode
Open up the charging case and press the button on the side for 3 seconds. 10s Press and hold 10 seconds to factory reset. -
Connect earbuds
Turn on Bluetooth on smartphone, connect to DIZO Go Pods -
Touch function
Functioning area is in black circle.
| Touch twice to play or pause music, answer or end a call
---|---
| Touch three times to skip forward
| Press and hold 2 seconds on either side to decline an incoming call
| Press and hold 2 seconds on both sides to switch between noise controlling
modes
Packaging List
Earphone
Eartips (S/M/L, M installed by default)
Type-C charging cable
User guide
Use with realm Link
Download realm Link to explore more features.
https://www.realme.com/app-
download#realmeLink
Basic Parameters
Model: DA2001
Max power rate: ≤ 8dBm
USB type C input: 5.0V 500mA
Operation frequency: Bluetooth2402-2480MHz
Temperature Description
The headset shall be used under the environment with 0°C~45°C temperature and 45%~85% humidity, and the storage temperature shall be -20°C~35°C. The headset use will be affected and even the headset and battery may be damaged in case of too high or too low temperature. The headset shall be charged at 0°C~45°C which can be charged quickly at 15°C~45°C. The headset use will be influenced, and even the headset and battery may be damaged in case of too high or too low temperature when charging.
Battery warning
The built-in lithium battery of the product is forbidden to be disassembled,
impacted, extruded or put into fire. The battery under the very low air
pressure may result in explosion or flammable liquid or gas leakage. Avoid the
battery in a high-temperature environment or being exposed to strong sunlight
to avert explosion. Don’t use the battery continuously in case of serious
ballooning. The battery shall be handled pursuant to the local regulations and
shall not be disposed as household garbage. Don’t try to repair, remove or
refit the battery. The explosion may happen if the battery is replaced by the
one subject to incorrect model. Don’t compress or puncture the battery with
hard object. The battery leakage, overheating or outbreak of a fire may occur
if the battery is destroyed.
Don’t listen to the voice under high sound pressure and high volume for a long
time to prevent the possible hearing impairment when the headset is used.
Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
Important Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC ID: 2AYPPDA2001
Declaration of Conformity ：
Hereby, Realty (Shenzhen) Intelligent Technology Co., Ltd., declares that this
device is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.dizo.net/eu-com pliancy
RF exposure information: The EIRP power of the device at maximal case is below
the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment
has been performed to prove that this unit will not generate the harmful EM
emission above the reference level as specified in EC Council
Recommendation(1999/519/EC).
Warranty
Thank you for purchasing DIZO products. We will provide comprehensive warranty services according to local laws and regulations. From more details about our warranty policy, please visit https://www.dizo.net.
Matters Needing Attention:
- When you buy the product, the sales unit will issue a valid proof of purchase.
- The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost.
- If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the DIZO customer service center for free maintenance during the warranty period.
Non-warranty situation:
This warranty does not cover the following cases:
- Out of warranty period.
- Damage caused by use not in accordance with the instructions.
- Damage caused by man-made causes.
- Failure caused by unauthorized disassembly, maintenance, or modification of the product.
- Damage caused by force majeure factors (such as floods, earthquakes, lightning, etc.).
- There is no warranty card, invoice, or warranty card that does not match the invoice information.
- The product wears naturally.
- Other failures and damages that are not caused by the quality of the product itself.
Warranty Card (Stub Copy)
Dear user, thank you for using the product of our company. Please read and
keep properly the warranty card after purchasing the product so that we can
provide better services to you.
User Information
User’s name…………………………………………………..
Phone Number…………………………………………….
Address………………………………………………………..
Email……………………………………………………………
Product Information
Product Model………………………………………..
Product Serial Number…………………………..
Sales Information
Purchase Date……………………………………
Invoice Number………………………………
Sales Unit………………………………………..
Phone Number………………………………
Address………………………………………….
Warranty Card (Customer Copy)
Dear user, thank you for using the product of our company. Please read and
keep properly the warranty card after purchasing the product so that we can
provide better services to you.
User Information
User’s name…………………………………….
Phone Number………………………………..
Address………………………………………….
Email………………………………………….
Product Information
Product Model…………………………………………
Product Serial Number…………………………….
Sales Information
Purchase Date…………………………………..
Invoice Number……………………………….
Sales Unit………………………………………..
Phone Number………………………………
Address………………………………………….
Realfit (Shenzhen) Intelligent Technology Co., Ltd.
Room 201, building a, No.1 Qian wan 1st Road, Shenzhen Hong Kong
cooperation zone, Qiana, Shenzhen, Guangdong, China