DIZO DA2002 GoPods D True Wireless Earbuds User Guide
- June 6, 2024
- DIZO
Table of Contents
- Touch operation
- Use with realme Link
- Basic Parameters
- Packing List
- Battery warning
- FCC Statement
- Radiation Exposure Statement
- Warranty
- Warranty
- Matters Needing Attention:
- Non-warranty situation:
- Warranty Card (Stub Copy)
- Warranty Card (Customer Copy)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DIZO GoPods D
User Guide
-
Enter pairing mode
Open up the charging case and keep both earbuds in the case, and press button on both earbuds for more than 3s. -
Connect earbuds
Turn on Bluetooth on smartphone, search and connect to “DIZO GoPods D”
Touch operation
Touch twice: Play/pause music; Answer/hang up.
Touch three times: Next Song.
Press and hold for 2s: Reject incoming call.
Press and hold both left and right earbuds for 2s:
Enter/Exit Game Mode.
Use with realme Link
Users can download realme Link to install additional features for DIZO GoPods
D
Search realme Link in APP Store, or scan the following QR code to download
| https://play.google.com/store/apps/details?id=com.realme.link
---|---
Basic Parameters
Product name | DIZO GoPods D |
---|---|
Product model | DA2002 |
Bluetooth version | Bluetooth 5.0 |
Bluetooth protocol | HFP/A2DP/AVRCP |
Bluetooth code | SBC |
Charging interface | Micro-USB |
Endurance (music) | About 5h (earbuds) |
About 20h (use with charging case)
Charging time| About 2h
Bluetooth communication distance| ≤10m
Working frequency| 2.4GHz~2.4835 GHz
Max power rate| ≤ 9dBm
Packing List
- DIZO GoPods D x 1
- Ear tips x 6 (two of them have been mounted)
- User Guide x 1
- Micro-USB charging cable x 1
Battery warning
The built-in lithium battery of the product is forbidden to be disassembled,
impacted, extruded or put into fire. The battery under the very low air
pressure may result in explosion or flammable liquid or gas leakage. Avoid the
battery in a high-temperature environment or being exposed to strong sunlight
to avert explosion. Don’t use the battery continuously in case of serious
ballooning. The battery shall be handled pursuant to the local regulations and
shall not be disposed as household garbage. Don’t try to repair, remove or
refit the battery. The explosion may happen if the battery is replaced by the
one subject to incorrect model. Don’t compress or puncture the battery with
hard object. The battery leakage, overheating or outbreak of a fire may occur
if the battery is destroyed.
Hereby, Realfit (Shenzhen) Intelligent Technology Co., Ltd., declares that
this device is in compliance with the essential requirements and other
relevant provisions of Radio Equipment Directive 2014/53/EU. The declaration
of conformity may be consulted at http www.dizo.net/eu-
compliance.
RF exposure information: The EIRP power of the device at maximal case is below
the exempt condition, 20mW specified in EN 50663 : 2017. RF exposure
assessment has been performed to prove that this unit will not generate the
harmful EM emission above the reference level as specified in EC Council
Recommendation (1999/519/EC).
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
Important Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC ID: 2AYPPDA2002L
FCC ID: 2AYPPDA2002R
Warranty
- Don’t place the product into a liquid environment or avoid the product exposed to high humidity.
- Avoid extrusion to avert the damage to the product.
- Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time.
- Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.
- Avoid the dusty, wet and dirty environment where the electronic circuit of the equipment may be damaged if being used.
- Don’t use the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard.
- Don’t use the equipment when riding a motorcycle or a bicycle, driving a car or crossing the road to ensure your safety.
- Keep the equipment out of reach of children or pets to avert the damage.
- Don’t wash the equipment with chemical, cleanser or strong detergent.
Don’t listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.
Warranty
Thank you for purchasing DIZO products.
- We will provide comprehensive warranty services according to local laws and regulations.
- From more details about our warranty policy,please visit https://www.dizo.net.
Matters Needing Attention:
- When you buy the product, the sales unit will issue a valid proof of purchase.
- The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost.
- If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the DIZO customer service center for free maintenance during the warranty period.
Non-warranty situation:
This warranty does not cover the following cases:
- Out of warranty period.
- Damage caused by use not in accordance with the instructions.
- Damage caused by man-made causes.
- Failure caused by unauthorized disassembly, maintenance, or modification of the product.
- Damage caused by force majeure factors (such as floods, earthquakes, lightning, etc.).
- There is no warranty card, invoice, or warranty card that does not match the invoice information.
- The product wears naturally.
- Other failures and damages that are not caused by the quality of the product itself.
Website : www.dizo.net
Warranty Card (Stub Copy)
Dear user, thank you for using the product of our company. Please read and
keep properly the warranty card after purchasing the product so that we can
provide better services to you.
User Information
User’s name
Phone Number ____
Address Email
Product Information
Product Model ___
Product Serial Number
Sales Information
Purchase Date ____
Invoice Number __
Sales Unit ____
Phone Number
Address _____
Warranty Card (Customer Copy)
Dear user, thank you for using the product of our company. Please read and keep properly the warranty card after purchasing the product so that we can provide better services to you.
User Information
User’s name _____
Phone Number __
Address ____
Email __
Product Information
Product Model ___
Product Serial Number
Sales Information
Purchase Date ____
Invoice Number __
Sales Unit ____
Phone Number
Address _____
Realfit (Shenzhen) Intelligent Technology Co., Ltd.
Room 201, building a, No.1 Qianwan 1st Road, Shenzhen Hong Kong cooperation
zone, Qianhai, Shenzhen, Guangdong, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>