HYTRONIK HC038V/BT Detached Motion Sensor with Bluetooth 5.0 SIG Mesh Instruction Manual
- June 6, 2024
- HYTRONIK
Table of Contents
Detached Motion Sensor with 5.0 SIG Mesh
HC038V/BT HCD038/BT
0/1-10V Output DALI Output
Product Description
HC038V/BT is a Bluetooth 0/1-10V control base whereas HCD038/BT is a Bluetooth
DALI control base with a 30mA DALI power supply built in. They work with a
wide range of microwave and PIR sensor heads. They are ideal for plastic
luminaires as compared to metal luminaires because Bluetooth signals can
transmit through the plastic. They are suitable for any typical indoor
applications such as office, classroom, car park, warehouse, and other
commercial/industrial areas. With Bluetooth wireless mesh networking, it makes
communication much easier without any hardwiring, which eventually adds value
to luminaires and saves costs for projects. Meanwhile, simple device setup and
commissioning can be done via the app.
App Features
Grouping luminaires via mesh network
– Two levels: room & group
– Synchronization control
7 types of scene options to set up:
– Generic Scenes
– Lux ON/OFF Scenes
– Daylight Harvest (Open-loop)
– Daylight Harvest (Closed-loop)
– Simple circadian rhythm without daylight sensor (HCD038/BT)
– Advanced circadian rhythm with daylight sensor (HCD038/BT)
– Time-based Scene
App Features
| Push switch configuration
---|---
Detailed motion sensor settings
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Floorplan feature to simplify project planning
Staircase function (master & slave)
Offline commissioning
Different permission levels via authority management
Network sharing via QR code or key code
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean range of wireless switches
Device firmware update over-the-air (OTA)
Continuous development in progress…
Hardware Features
| HC038V/BT: 0/1-10V output :
− 400VA (capacitive)
− 800W (resistive)
---|---
HCD038/BT: 30mA DALI broadcast output for up to 15 LED drivers
Plug’n’Play for flexible installation and cost
saving assemble
Support to control DT8 LED
drivers (HCD038/BT)
2 Push inputs for flexible manual control(HCD038/BT)
Zero crossing detection circuit to reduce in-rush
current and prolong relay lifetime (HC038V/BT)
Loop-in and loop-out terminals for efficient
installation (HC038V/BT only)
5-year warranty
Fully support
EnOcean switch EWSSB/EWSDB
Technical Specifications (HC038V/BT HCD038/BT)
Bluetooth Transceiver
| Operation frequency | 2.4 GHz – 2.483 GHz |
|---|---|
| Transmission power | 4 dBm |
| Range (Typical indoor) | 10~30m |
| Protocol | 5.0 SIG Mesh |
Safety & EMC
| EMC standard (EMC) | EN55015, EN61000, EN61547 |
|---|---|
| Safety standard (LVD) | EN60669-1, EN60669-2-1 |
| RED | EN300328, EN301489-1/-17 |
| Certification | Semko, CB, CE , EMC, RED, RCM |
Input & Output Characteristics
| Operating voltage | 220~240VAC 50/60Hz |
|---|---|
| Stand-by power | <1W |
Load ratings: HC038V/BT
HCD038/BT| Capacitive: 400W; Resistive: 800W
30mA (max. 15 devices)
Warming-up| The 20s
Environment
| Operation temperature | Ta: -20 °C ~ +55°C |
|---|---|
| Case temperature (Max.) | Tc: +75 °C |
| IP rating | IP20 |
Mechanical Structure & Dimensions
HC038V/BT (0/1-10V output)
HCD038/BT (DALI output)
Wire Preparation
To make or release the wire from the terminal, use a screwdriver to push down the button.
Wiring Diagram
Technical Specifications for Sensor Heads
PIR Sensor Properties
| Sensor principle | PIR detection |
|---|---|
| Operating voltage | 5VDC |
| Detection range* | HIR05 & HIR05/FM & HIR05/E & HIR07 |
Max installation height：3m
Max detection range：6m (diameter)
HIR11
Max installation height：15m (forklift)
12m (single person)
Max detection range： 20m (diameter)
HIR12
Max installation height：15m (forklift)
12m (single person)
Max detection range： 18m 6m (L W)
HF Sensor Properties
| Sensor principle | High Frequency (microwave) |
|---|---|
| Operating voltage | 5VDC |
| Operation frequency | 5.8GHz +/- 75MHz |
| Transmission power | <0.2mW |
| Detection range* | SAM20 / SAM21 / SAM22 |
Max installation height：3m
Max detection range：12m (diameter)
SAM23
Max installation height：15m (forklift)
12m (single person)
Max detection range： 20m (diameter)
- The detection range is heavily influenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.
PIR & microwave sensor heads
The range of PIR and microwave sensor heads below offers a powerful number of
Plug’n’Play feature options to expand the fiexibility of luminaires design.
This approach to luminaire design reduces space requirements and component
costs whilst simplifying production.
A. HIR05
PIR sensor head The cable length is around 65cm.
B. HIR05/E
PIR sensor head The cable length is around 65cm.
C. HIR05/FM
PIR sensor head The cable length is around 65cm.
B. HIR07
PIR sensor head Photocell AdvanceTM The cable length is around 30cm.
C. HIR11/S
PIR sensor head Surface mounting For high bay application IP65 (facia/lens
part) The cable length is around 65cm.
D. HIR11/F
PIR sensor head Flush-mounting For high bay application IP65 (facia/lens part)
The cable length is around 65cm.
E. HIR11/C
PIR sensor head Screw to the luminaire by conduit For high bay application
IP65 (facia/lens part) The cable length is around 65cm.
F. HIR12
PIR sensor head For high bay application IP65 (facia/lens part) The cable
length is around 65cm.
H. SAM20
HF sensor head Photocell AdvanceTM The cable length is around 30cm.
I. SAM21
HF sensor head IP65 The cable length is around 65cm.
J. SAM22
HF sensor head Flush mount The cable length is around 65cm.
K. SAM23
HF sensor head Photocell advance For high bay application The cable length is
around 30cm
Optional Accessory: Reinforced Bluetooth Antenna
For some special applications, customers may need a larger Bluetooth
transmission for both smartphones to device and device to device. Thanks to
the reinforced Bluetooth antenna, with it being added to the control base
HC038V/BT & HCD038/BTthe transmission distance (smartphone to device) enlarges
to 20m, the distance of the device to device is around 50m.
Detection Pattern
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches. Detailed Push
switch configurations can be set on the Koolmesh app.
| Switch Function | Action | Descriptions |
|---|---|---|
| Push switch | Short press (<1 second) | |
| * Short press has to be longer than 0.1s, or it will be invalid. | – Turn on/off – Recall a scene |
– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (≥1 second)| – Dimming
– Colour tuning – Do nothing
Simulate sensor| /| – Upgrade a normal on/off the motion sensor
to a Bluetooth controlled motion sensor
Additional Information / Documents
-
For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to
www.hytronik.com/download->knowledge->Introduction of Photocell Advance -
To learn more about detailed product features/functions, please refer to
www.hytronik.com/download->knowledge->Introduction of App Scenes and Product Functions -
Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download->knowledge->Bluetooth Products-Precautions for Product Installation and Operation -
Regarding precautions for microwave sensor installation and operation, please kindly refer to
www.hytronik.com/download->knowledge->Microwave Sensors – Precautions for Product Installation and Operation -
Regarding precautions for PIR Sensors installation and operation, please kindly refer to
www.hytronik.com/download->knowledge->PIR Sensors – Precautions for Product Installation and Operation -
Datasheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors -
Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download->knowledge->Hytronik Standard Guarantee Policy
Subject to change without notice
.Edition: 26 Feb. 2020 Ver. A0 Page 7/7