Continental WLC-CEM02 Wireless Power Charger User Manual
- June 6, 2024
- Continental
Table of Contents
User Manual
CONTINENTAL
WLC
Wireless Power Charger
WLC-CEM02
System description
Continental Wireless Power Charger is developed for automotive applications
under the name WLC. It includes one function:
– WPC: Wireless Power Charging
WPC parameters
| Parameters | Values |
|---|---|
| Carrier frequency | 126.7 kHz |
| Frequency shift | +/-6 kHz |
| Supply voltage | 13.5V battery |
| Voltage supply range | 8V < VBAT < 16V |
| Max. supply power | 33W |
| Operating temperature range* | -40°C < Temp < 85°C |
Smartphone operating temperature range
Smartphone operating temperature range| -20°C < Temp < 60°C
Max. Output Power on receiver load**| 11W
WPC chipset brand| Renesas
WPC litz coil| Single coil MPA14 according to Qi standard
WPC litz coil gain @ 126.7kHz| -108.3dBi
Dimensions (X/Y/Z in mm)| 142 x 91.5 x 23.5
Product weight| 150 g
Vehicle fuse protection| 10:00 AM
Vehicle installation
Although the WLC module is intended for different vehicles, it is always installed in the vehicle front central console (see an example in Figure 7).
The installation with the shortest distance to the human body is illustrated
in Figure 8: 11.26cm.
Figure 8. Shortest distance to the human body
Warning statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by
the party responsible for compliance could void the authority to operate the
equipment. This device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.