JMTeK PBW500W Power Bank with Wireless Charging User Manual
- June 6, 2024
- JMTek
Table of Contents
JMTeK PBW500W Power Bank with Wireless Charging
Congratulations on your purchase of this power bank with wireless charging. To ensure a long servica life and optimal functionality of the product we recommend that you read this manual carefully.
Package Content:
- 1 Power bank
- 1 USB Cable Carried with body
- 1 User Manual
Specifications:
- Capacity: 5000mAh/3. 7V
- Input: 5.0V/2A
- Output: 5.0V /2.4A (USB Port)
- Wireless Output: 5.0V /1.0A 5 watt
Product description:
First Use:
First make sure that the product is intact and the delivery is complete.
Before using the appliance for the first time, charge the unit completely! We
recommend devices with “2A output”, then the charging time is about 2-3 hours
Wireless charging at home/in office
Connect the device to the power outlet using the micro USB or Type-C cable
attached to the PC, laptop, or USB adapter. The LEDs will light up during the
charging process. As long as one or more LEDs are flashing, the charging
process has not yet been completed. If all LEDs are lit continuously, the
charger is fully charged. Make sure the device is secure and cannot wobble or
fall down.Place your mobile phone (or other device) on the transfer surface.
Please, see the sketch:
Battery indication:
The LED indication shows the current battery status. Please press the button
to see the result:
- 1 LED < 25%
- 2 LEDs < 50%
- 3 LEDs < 75%
- 4 LEDs < 100%
In case only 0-1 LEDs are flashing, the battery status is less than 10%. Please recharge the charger
Power bank function (wireless and by cable):
You can use this charger also as a power bank. Place your mobile phone on the
charger as shown above. Press and release the button for starting charging
procedure. To stop the charging function, press the button again twice or
simply remove the mobile phone. Make sure the device is correctly located on
the wireless charger. See the following illustrations as it is correct (hook)
and False (cross).
Note: In case your mobile phone does not support wireless charging, please connect it to the USB output of the charger by using the original cable.
Recharging:
Connect the charger to the USB port of computer, laptop or USB adaptor by
using the Micro USB or Type-C cable. While charging procedure, all LEDs are
ON. If there are one or some LEDs flashing, the charging is not completed. In
case the charger is fully charged, all LEDs are illuminated constantly
Security advice:
- Incorrect usage can cause explosions/ danger of chemical burn.
- Damages batteries can cause chemical burn when they get in contact with human skin.
- Do not disassemble the item.
- Never throw the item or parts of it into fire.
- Never expose the item to high temperature changes Hot/Cold or humidity or liquids.
- Keep away from children, no toy!
- Do not use if the items or parts of it are damaged.
- Store in a clean and dry space.
- To maintain 100% battery capacity and to prevent damage by depth discharge the item should be recharged every 6 months. Battery will loose capacity when stored without charging.
- If the product gets very hot, please disconnect the item and do not use it.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.If this equipment does cause harmful
interference to radio or television reception,which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body Wireless Power
Bank cannot be used as a mobile phone battery.
Notes to users: Recommended to be placed on the table during charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>