Jmtek Industries BTE100 Bluetooth Earbuds Instruction Manual
- June 6, 2024
- Jmtek Industries
Table of Contents
Jmtek Industries BTE100 Bluetooth Earbuds Instruction Manual
Accessories
TWS earbuds x 1
Charging cable x 1
User manual x 1
Usage
Turn on: Just take the two earbuds out of the charging cradle. They will
turn on automatically. Once the earbuds have powered on, you should hear a
sound indicating that they have automatically connected with each other.
Turn off: There are two ways to turn off the earbuds. Once the earbuds
have powered off, you will hear a sound indicating that they are off. The RED
indicating light will flash three times quickly. Method 1: Put the earbuds
into the charging cradle. The earbuds will turn off and go into charging mode
automatically. Method 2: You can press and hold the control buttons on the
earbuds for three seconds to turn them off. Note: If you turn off only one of
the earbuds, the other one will remain connected with the mobile device and
carry on working.
Earbud Pairing
The earbuds will pair with each other automatically when they are turned on.
One of the earbuds will become the master earbud. The master earbud’s LED
indicating light will flash RED and BLUE alternately. The other earbud will
not display any light.
Note: You can change which earbud is the master whenever you like. While the
earbuds are paired with each other but do not have a Bluetooth connection with
a mobile device, press the power button on the master earbud briefly twice,
then press the power button on the earbud that you want to be master briefly
twice. It will become the master.
Bluetooth Connection with Mobile Device
While the earbuds are paired with one another, open the Bluetooth settings on
your mobile phone, iPad or other Bluetooth-enabled device, search BTE100′ and click on it to connect. When the earbuds connect with your device successfully via Bluetooth, you will hearCONNECTED’ and the LED indicating lights on the
earbuds will turn off. You can then play music on your device and enjoy it
through the earbuds.
Note: 1. After connecting with a mobile device for the first time, the earbuds
will connect with that device automatically whenever they are turned on and
the device has Bluetooth turned on, so long as ‘BTE100’ has not been deleted
from your Bluetooth list on the device. 2. The earbuds will turn off
automatically if no Bluetooth connection with your device is established
within 3 minutes.
Functions of Control Buttons on Earbuds
Play/Stop music: When playing music, briefly press either earbud’s control
button to stop/play the music.
Next song: When playing music, press and hold either earbud’s control
button for 1.5 seconds to skip to the next song. (Beware: if you press and
hold for 3 seconds, the earbuds will turn off.)
Answering a call: When a phone call is received, briefly press either
earbud’s control button to answer the call.
Hanging up: During a phone call, briefly press either earbud’s control
button to end the call.
Recall: Press either earbud’s control button twice quickly to dial the
last number in your mobile phone’s call list.
Stop dialling: Briefly press either earbud’s control button to stop the
dialling process.
Decline a call: Press and hold either earbud’s control button for 1.5
seconds to decline a call. (Beware: if you press and hold for 3 seconds, the
earbuds will turn off.)Low-Power Indication When the voltage of the earbuds
gets lower than 3.4V, you will hear a sound indicating that you should charge
them. After three such warnings, the earbuds will automatically turn off as
the LED flashes red three times quickly and the power off warning sound is
heard. Please charge your earbuds.
Charging
Charging the charging cradle: Use the Micro USB charging cable provided
to connect the charging cradle to the power supply. The charging cradle’s blue
LEDs will flash while it is charging. Four blue LEDs will be shown when it is
fully charged.
Charging the earbuds: Just place the earbuds into the charging cradle.
The earbuds will automatically enter charging mode if the cradle is charged or
connected to the power supply. The earbuds will display a red LED light while
they are charging, and this will turn off when they are fully charged.
Specifications
Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods. Made in China.
FCC Warning Statement Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>