Jmtek Industries WPC20W 3-In-1 Wireless Charger Instruction Manual

: June 5, 2024
: Jmtek Industries

Table of Contents

Package Content
Specification
Instructions
Remark:
General usage tips
Safety information
FCC STATEMENT :
FCC Radiation Exposure Statement:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Industries Jack Industries WPC20W 3-In-1 Wireless Charger
Instruction Manual

Please read the following carefully before using the device to ensure safe and proper use.

Package Content

3 in 1 wireless charger unit
User Manual
USB-A to USB-C charging cable

Specification

Input: DC 5V/2A; DC 9V/4A Max.
Output 1: 15W Max. for charging Qi-enabled phones or devices
Output 2: 3W Max. for charging Apple watch only
Output 3: 1 OW Max. for charging Qi-enabled phones or devices

Instructions

Connect the unit with a wall charger using the included cable or another quality Type–C charging cable and plug the wall charger into an electronic socket.
When powered on, the LED indicator bar lights up and then goes out.
When placing the phone on the output 1 ( 15W) or output 3 ( 1 OW) LED indicator bar lights up, and wireless charging start.
To charge Apple Watch, place the Apple Watch onto output 2 (3W) to start wireless charging. The LED indicator light will not light up when only charging Apple Watch.

Remark:

If the LED indicator light is flashing, please check and remove whether there is a foreign object between the charger and charging device. If the issue continues, unplug the power adapter and reconnect. Do not use it if the LED indicator light keeps flashing.

General usage tips

To achieve the best charging experience while charging three devices simultaneously.
We recommend using the device with a 30W or above adapter to achieve max output for suitable devices.
While using adapters with only 5V /2A, the device will only support charging either one Qi-enabled phone at 5W or Apple Watch. Charing multiple devices simultaneously is not supported.
While using QC or PD adapters under 30W with 9V /2A, simultaneously charging multiple devices is supported. However, you may experience slowness or be unable to charge due to a lack of power supply to the demand of your device. The device’s OS may terminate the charging while an insufficient power supply detected.
For a better wireless charging experience, remove phone cases.
Charging time varies based on phone models, battery capacity, input specifications, current energy consumption, phone placement, distance, and other technical restrictions.
Do not use a computer or laptop USB as a power supply. A computer or laptop USB does not provide sufficient power for the product to function.

Safety information

Do not use damaged power cords, wall plugs, or loose electrical sockets with the product.
Do not use if the product is damaged.
Do not drop or cause an impact on the product.
Do not disassemble, modify, or repair the product.
Do not bum or place the product in a hot environment.
Do not place metal objects between the phone and the wireless charger or on top of the wireless charger.
Keep the product away from water or humid environments.

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.