CHAUVET DJ Wash FX 2 Projection Lighting Effect User Guide
- June 6, 2024
- Chauvet DJ
Table of Contents
CHAUVET DJ Wash FX 2 Projection Lighting Effect
About This Guide
The Wash FX 2 Quick Reference Guide (QRG) has basic product information such
as mounting, menu options, and DMX values. Download the User Manual from
www.chauvetdj.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR
WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com
/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the
Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu
/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and
workmanship under normal use, for the period specified in, and subject to the
exclusions and limitations set forth in the full limited warranty on our
website. This warranty extends only to the original purchaser of the product
and is not transferable. To exercise rights under this warranty, you must
provide proof of purchase in the form of an original sales receipt from an
authorized dealer that shows the product name and date of purchase. THERE ARE
NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal
rights. You may also have other rights that vary from state to state and
country to country. This warranty is valid only in the United States, United
Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France,
Germany and Mexico. For warranty terms in other countries, please consult your
local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and
maintenance.
- Always connect the product to a grounded circuit.
- Make sure the power cord is not crimped or damaged.
- Always disconnect the product from the power source before cleaning it or replacing the fuse.
- Never disconnect the product from the power source by pulling or tugging on the cord.
- If mounting the product overhead, make sure there is adequate support for the product’s weight and always secure the product using a safety cable.
- Make sure there are no flammable materials close to the product when it is operating.
- Avoid direct eye exposure to the light source while the product is on.
- Do not touch the product’s housing when the product is operating because the housing can be very hot.
- The product is not intended for permanent installation.
- The product is for indoor use only. It is rated at IP20. Do not expose the product to rain or moisture.
- Always connect the product to a power source that is within the voltage range stated on the label or rear panel of the product.
- Never connect the product to a dimmer or rheostat.
- Make sure to replace the fuse with another of the same type and rating.
- Always install the product in a location with adequate ventilation.
- Always leave at least 20 in (50 cm) between the product and adjacent surfaces.
- Be sure that no ventilation slots on the product’s housing are blocked.
- Do not operate the product at an ambient temperature higher than 104 °F (40 °C).
- Never carry the product by the power cord or any moving part.
- Always use the mounting/hanging bracket to lift the product.
- If there is a serious operating problem, stop using the product immediately.
- Never try to repair the product. Repairs carried out by untrained people can lead to damage or malfunction.
- To eliminate wear and improve its lifespan, during periods of non-use completely disconnect from power via breaker or by unplugging it.
Contact
Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or
Mexico, contact your distributor to request support or return a product. Refer
to Contact Us at the end of this QRG for contact information.
What is Included
- Wash FX 2
- Power Cord
- Quick Reference Guide
To Begin
Unpack your Wash FX 2 and make sure you have received all parts in good condition. If the box or contents appear damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz. To eliminate wear and improve its lifespan,
during periods of non-use completely disconnect the product from power via a
breaker or by unplugging it.
Power Linking
For the maximum number of Wash FX 2 products that you can power link at each
voltage, see the User Manual or the specification sticker on the product.
Fuse Replacement
- Disconnect the product from power.
- Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
- Pry the safety cap out of the housing.
- Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same type and rating.
- Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the Safety Notes.
Mounting Diagram
Control Panel Description
| Button | Function |
|---|---|
| < MENU> | Exits from the current menu or function |
| < UP> | Navigates upwards through the menu list and increases the numeric |
value when in a function
< DOWN>| Navigates downwards through the menu list and decreases the
numeric value when in a function
< ENTER>| Enables the currently displayed menu or sets the currently
selected value into the selected function
Menu Map
Refer to the Wash FX 2 product page on www.chauvetdj.com for the latest menu map.
| Mode | Programming Levels | Description |
|---|
DMX Mode
| 3Ch|
d001-512
|
Sets the DMX personality
4Ch
8Ch
28Ch
Static Colors| C–| C001-022| Static colors
Auto Programs| P–| P 1-16| Auto programs
Auto Speed| S–| S001-100| Program speed for P1~P16
Dimmer| dIM| L001-255| Adjust the dimmer on auto and sound
programs
Sound-Active Mode| Snd| Snd1-9| Sound-active programs
Sound Sensitivity| SEnS| u001-100| Sound sensitivity
Custom Color Mixing
|
u–
| r000-255|
Custom static colors
Combines Red, Green, Blue, and UV
g000-255
b000-255
u000-255
Infrared Mode| SEt| on| Turns infrared on or off
oFF
DMX Linking
The Wash FX 2 can work with a DMX controller. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you are
not familiar with DMX, download the DMX Primer from
www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest
recommended DMX address is 484.
Master/Slave Connection
The Wash FX 2 uses the DMX data connection for its Master/Slave mode.
Information about configuring the Wash FX 2 for Master/Slave operation is in
the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The Wash FX 2 can be operated with the CHAUVET IRC-6. For more information
about the IRC-6, download instructions for the IRC-6 or the Wash FX 2 User
Manual from www.chauvetdj.com.
DMX Values 28Ch
| Channel | Function | Value | Percent/Setting |
|---|---|---|---|
| 000 | ó | 005 | |
| 006 | ó | 020 | |
| 021 | ó | 035 | |
| 036 | ó | 050 | |
| 051 | ó | 065 | |
| 066 | ó | 080 | |
| 081 | ó | 095 | |
| 096 | ó | 110 | |
| 1 | Auto Program | 111 | ó |
| 126 | ó | 140 | |
| 141 | ó | 155 | |
| 156 | ó | 170 | |
| 171 | ó | 185 | |
| 186 | ó | 200 | |
| 201 | ó | 215 | |
| 216 | ó | 230 | |
| 231 | ó | 255 | |
| 2 | Auto program Speed | 000 | ó |
| 251 | ó | 255 | Sound Active Mode |
| 3 | Dimmer | 000 | ó |
| 4 | Strobe | 000 | ó |
| 5 | Red Zone 1 | 000 | ó |
| 6 | Green Zone 1 | 000 | ó |
| 7 | Blue Zone 1 | 000 | ó |
| 8 | UV Zone 1 | 000 | ó |
| 9 | Red Zone 2 | 000 | ó |
| 10 | Green Zone 2 | 000 | ó |
| 11 | Blue Zone 2 | 000 | ó |
| 12 | UV Zone 2 | 000 | ó |
| 13 | Red Zone 3 | 000 | ó |
| 14 | Green Zone 3 | 000 | ó |
| 15 | Blue Zone 3 | 000 | ó |
| 16 | UV Zone 3 | 000 | ó |
| 17 | Red Zone 4 | 000 | ó |
| 18 | Green Zone 4 | 000 | ó |
| 19 | Blue Zone 4 | 000 | ó |
| 20 | UV Zone 4 | 000 | ó |
| 21 | Red Zone 5 | 000 | ó |
| 22 | Green Zone 5 | 000 | ó |
| 23 | Blue Zone 5 | 000 | ó |
| 24 | UV Zone 5 | 000 | ó |
| 25 | Red Zone 6 | 000 | ó |
| 26 | Green Zone 6 | 000 | ó |
| 27 | Blue Zone 6 | 000 | ó |
| 28 | UV Zone 6 | 000 | ó |
8Ch
| Channel | Function | Value | Percent/Setting |
|---|---|---|---|
| 1 | Red | 000 | ó |
| 2 | Green | 000 | ó |
| 3 | Blue | 000 | ó |
| 4 | UV | 000 | ó |
| 5 | Strobe | 000 | ó |
| 000 | ó | 005 | |
| 006 | ó | 020 | |
| 021 | ó | 035 | |
| 036 | ó | 050 | |
| 051 | ó | 065 | |
| 066 | ó | 080 | |
| 081 | ó | 095 | |
| 096 | ó | 110 | |
| 6 | Auto Program | 111 | ó |
| 126 | ó | 140 | |
| 141 | ó | 155 | |
| 156 | ó | 170 | |
| 171 | ó | 185 | |
| 186 | ó | 200 | |
| 201 | ó | 215 | |
| 216 | ó | 230 | |
| 231 | ó | 255 | |
| 7 | Auto Program Speed | 000 | ó |
| 251 | ó | 255 | Sound Active Mode |
| 8 | Dimmer | 000 | ó |
4Ch
| Channel | Function | Value | Percent/Setting |
|---|---|---|---|
| 1 | Red | 000 ó 255 | 0–100% |
| 2 | Green | 000 ó 255 | 0–100% |
| 3 | Blue | 000 ó 255 | 0–100% |
| 4 | UV | 000 ó 255 | 0–100% |
3Ch
| Channel | Function | Value | Percent/Setting |
|---|---|---|---|
| 000 | ó | 005 | |
| 006 | ó | 020 | |
| 021 | ó | 035 | |
| 036 | ó | 050 | |
| 051 | ó | 065 | |
| 066 | ó | 080 | |
| 081 | ó | 095 | |
| 096 | ó | 110 | |
| 1 | Auto Program | 111 | ó |
| 126 | ó | 140 | |
| 141 | ó | 155 | |
| 156 | ó | 170 | |
| 171 | ó | 185 | |
| 186 | ó | 200 | |
| 201 | ó | 215 | |
| 216 | ó | 230 | |
| 231 | ó | 255 | |
| 2 | Auto Program Speed | 000 | ó |
| 251 | ó | 255 | Sound Active Mode |
| 3 | Dimmer | 000 | ó |
sound programs