AQFORM 60W LED Multitrack Suspended System Installation Guide
- September 13, 2024
- AQFORM
Table of Contents
AQFORM 60W LED Multitrack Suspended System
Installation Instruction
MULTITRACK Suspended System
Required Tools and Materials
- Screw H2.5
- Suspension kit
- Screw M2.9×9.5
- End cup power supply
Power Supply Dimensions
| Driver | 60W | 100W | 200W |
|---|---|---|---|
| L (mm) | 163 | 300 | 390 |
| M (mm) | 43 | 30 | 30 |
| H (mm) | 32 | 17 | 23 |
Components
- corner surface
- corner internal
- Adjustable corner internal
- Bracket
- Straight connection internal
Installation Steps
- Unpack the components and prepare for installation.
- Install the suspension kit as shown in the diagram.
- Secure the screws (x2) as indicated.
- Follow the steps for connecting the components:
- Insert the connector into the track.
- Secure the connector by tightening the screws.
- Connect the power supply (48V DC) to the system.
- Ensure all connections are secure and properly aligned.
- Turn on the power to test the system.
Mechanical Connection
Connection
- Align the `L’ corner pieces.
- Secure them together using the provided screws.
Straight Connection
- Align the straight connection pieces.
- Secure them together using the provided screws.
Specifications
| Component | Specification |
|---|---|
| Driver | 60W, 100W, 200W |
| Dimensions (L x M x H) | 163 x 43 x 32 mm, 300 x 30 x 17 mm, 390 x 30 x 23 mm |
FAQ
-
What tools are required for installation?
You will need a screwdriver, screws (H2.5 and M2.9×9.5), and the suspension kit. -
What are the dimensions of the power supply?
The dimensions vary based on the driver: 60W (163 x 43 x 32 mm), 100W (300 x 30 x 17 mm), 200W (390 x 30 x 23 mm). -
Can I replace the light source myself?
No, the light source should only be replaced by the manufacturer, his service agent, or a similarly qualified person.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
INSTALLATION INSTRUCTION
MULTITRACK suspended system
power supply dimensions
INSTALLATION
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Mechanical connection
32-070 | Poland | +48 12 270 21 22 | info@aqform.com | www.aqform.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>